TS3694 I am trying to restore my iphone and keep getting the error message 3014?
I am trying to restore my old iphone for my daughter and keep getting error message 3014 - my itunes has the latest version uploaded?
Have you looked here?
Similar Messages
-
Hello,
When I am trying to restore my iphone I a getting an error message that reads, " The iPhone "iPhone" could not be restored. An unknown error occurred (2001)."
What does that error message mean?
v/r,
A Concerned customerGoogle is your friend.
http://support.apple.com/kb/ts3694#error2001
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service. -
Can not update or restore my ipod touch, keep getting the error message 13019
can not update or restore my ipod touch, keep getting the error message 13019
Start here:
iTunes: Error 13019 during sync -
This is a question for a mini iPad...
I am trying to download an app and keep getting this error message: "Could not sign in. An unknown error has occurred. I have tried shutting down and restarting. I've tried changing the password. I get the error message with free and not free apps. Any suggestions on how to fix?Reports are that this is a problem with the iTunes Store that they're working on. Some people have had success after signing out of their account and back in. If that doesn't work for you, wait a few hours or perhaps until tomorrow and by then they may have the problem sorted out.
Regards. -
TS3694 i have tried to restore my iphone but keep getting error 1015 any suggestions
i have tried to restore my iphone but keep getting error 1015 any suggestion
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
-
I am trying to restore my ipad2 but i have the error message "The IPAD could not be rerstored. The device cannot be found"
Can anyone help me?Are you using the latest version of iTunes?
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Cheers, Tom -
TS3694 Tried to restore my IPOD and keep getting 1604 errors. Any help?
I haven't updated my ipod in 3 years because it was such a pain last time I did it and thankfully it came back. But I foolishly attempted it again and now after it was put in the restore mode and Itunes attemps to restore the device I get an error message with 1604. I have gone through the troubleshooting steps, tried different USB ports and get the same result. Any help?
If as the artical says, uyou tried another computer and another network then make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
This is an old file saved from a crashed MacBook and we're trying to figure out if we can get the information from the file - a list of contacts and addresses.
Appreciate any help you can supply.As of Lion (10.7) the PowerPC compatibility "Rosetta" utility is no longer supported by Apple. So PowerPC programs such as AppleWorks no longer work.
For old software that will run under 10.7, 10.8 and 10.9 and will read some of the AppleWorks formats see:
https://discussions.apple.com/message/23999077?ac_cid=tw123456#23999077
and
https://discussions.apple.com/message/24000557?ac_cid=tw123456#24000557
If your Mac came with Snow Leopard or and earlier OS you can run Snow Leopard (10.6) on an external drive or on a partition on your internal drive to continue running PowerPC programs under the Rosetta utility. Using the Startup Manager http://support.apple.com/kb/ht1310 you would boot Snow Leopard to run the PowerPC applications and then reboot a newer OS (10.7, 10.8 or 10.9) to run normally.
If you have a newer machine or will be using the PowerPC applications often and you want to run them on Snow Leopard at the same time you run a newer operating system, then you can use a virtual machine such as Parallels, VirtualBox, or VMWare Fusion. You need the Snow Leopard Server version to use it with a virtual machine (VM). You need to call Apple to order SL Server.
Snow Leopard Server for $19.99 + sales tax & shipping costs at 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only).
Parallels VM ($80): http://www.parallels.com/products/desktop/
Virtual Box VM: (free,open source): https://www.virtualbox.org/
VMware Fusion VM ($39): http://www.vmware.com/products/fusion/
See Roger Wilmut’s article: Abandoning Appleworks:
http://www.wilmut.webspace.virginmedia.com/notes/aw/page1.html
Last call for AppleWorks users:
http://www.macworld.com/article/1160843/last_appleworks.html -
I've used this same iTunes account multiple times to back up phones and restore them when I've gotten new devices. I have restored this device as well once before, but i want it as up to date as possible becuase I am getting the iPhone 6 tomorrow. I've run a diagnostics test and under the connectivity test its saying there is no iPhone found, as well as under the sync test. I've gone through all the steps and what the possible problem could be (un-installing and re-installing, making sure all the software is active and up to date on my computer and making sure everything is installed correctly and running properly) and I'm still getting the same error message. I'm out of options and idea. Please help!
Hey avitz99,
Thanks for the question. After reviewing your post, it sounds like the iPhone is not recognized in iTunes. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Device not recognized in iTunes for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
My artwork meets the specifications though I have gotten error messages stating that 300x300, 600x600, and 1400x1400 are the proper format. I have tried all of these. I've only gotten the artwork error message a couple of times. The most common error message I receive is, as stated above, "We are currently experiencing technical difficulties. Please try again later." I have tried uploading the podcast from a different computer and on an different network. Have any of you had this same issue, been able to work through it?
Thank you for getting back to me so quickly. The RSS feed is http://www.lifeinnortheastohio.com/the-panel-scanners/rss.xml
-
Ok I need help. I went to use my phone, put in my passcode, emergency dial came up, then the phone said I didn't have an imei #. I hit the back button and then I was told I needed to restore and update using iTunes. I tried several times to do this and my phone is still not working. It acts like it's updating, but once the bar reaches the other side of my phone, iTunes tells me there was an error. I used all the ports on my pc, changed cables, restarted my pc, and still nothing. Can anyone please help me. This phone is my life and I can't afford to get another one.
Sounds like you might need to take it to an Apple Store but if it is an iPhone 3G it would no longer be under warranty.
Looking at the Apple Store online you can get an iPhone 3GS from $49 on AT&T if it comes to having to get a new one. Your other option is second hand. -
Burning disc failed because communication to the disc drive failed. (error code 0x80020022) Any suggestions??
Sadly, that error has umpteen causes, sometimes the drive is going out, sometimes it's bad media, sometimes a slower burn works, & rarely a Cleaning Disc helps.
Bad File names can even cause it...
http://www.bbqiguana.com/2010/02/macos-x-error-0x80020022-trying-to-burn-dvds/ -
What I said in the question. I have windows XP
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time? -
Trying to download lightroom 5 and keep getting an error message
ERROR: Third party payload installer Install Lightroom 5 CCM.exe failed with exit code: 1603
check these suggestions even though they are for cs5, http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html
-
I am trying to download itunes 10.6 and keep getting the error message "The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes67.msi". Where do I find this or how do I get it?
"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
Item split (into 2 lines) in billing document from one delivery (VF01)
Hi, I need to split one item of one delivery into 2 items of billing (via VF01). Example: - I have a delivery 80941805 that has only one line with item material XXX and quantity 1000 - I wish to create a billing document (from the delivery above) wit
-
Apple TV connect to early 2011 MacBookPro
I have an early 2011 Macbook Pro running OSX Lion 10.7.5. I just bought Apple TV and the airplay icon is not showing on my Mac. Warning: I'm not too tech saavy. What is the fix please?
-
How can I plump up my 2008 MacBook white?!
Hello clever people. I sold my fancy MacBook Pro to go travelling so have now reverted to my trusty 2008 MacBook White and have updated to OSX 10.7.5. I would like to know how I can beef up my performance - I know I can upgrade my memory but I want
-
hi, We have to implement old and new MSS business package as Web Dynpro(new) business package does not provide all the services. So my question here is how to make a comprehensive overview page. What is the best way to make an Overview page with serv
-
ME5A Report - Request for Help
Dear All, I am working on the Report (ME5A) - Purchase Requisition List. I have completed the following items, viz, a) Additon of Two more fields MRP Type and Lot Size in the Screen Input. b) Appended the structure MEREP_OUTTAB_EBAN with the above t