TS3694 I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please

I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Similar Messages

  • HT4061 how do I get my iPad out of recovery mode, Apple are asking for my serial number can not do as it is locked can not enter at all

    my ipad is locked with the itunes icon & cable on the screen I believe this is recovery mode?? how do I get it to work again

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • I cant get my mac out of recovery mode and the disk got deleted

    i cant get my mac out of recovery mode becuase the disk got deleted and i didnt back it up from time machine

    This should work -- at least to get you booted.
    http://support.apple.com/kb/PH13871

  • When itunes starts it comes up with "an unknown error occurred (--4211).

    when itunes starts it comes up with "an unknown error occurred (--4211).
    It then works normally - except it does not recognize any USB devices (eg iPhone, iPad)

    See the following topic for suggestions on how to find the folder on Windows 8 systems:
    TS1389 Re: How can you do this in windows 8?

  • When I click the Mozilla icon on my desktop, nothing happens. I have tried nearly everything. Please help

    When I click the icon nothing happens. My Internet is working fine but firefox is not responding. I have tried restating my computer and tried uninstalling and then re installing but they didn't work

    Double click home button click home nbutton then keep finger pressed on mail icon at bottom and press the reduce sound button that did the trick for me.

  • HT4623 iTunes but it comes up with a page to either login or subscribe again

    I have subscribed to the Advertiser and received conformation from iTunes but it up up with a peg to either login or subscribe again once the paper loads

    Try here:
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    If not successful see the previous discussion on the right side of this page with the green checkmark.

  • TS3694 hi, i tried to do a software update on my iphone 3gs and it comes up with an unknown error code 1015, any ideas?

    i tried to do a software update on my iphone 3gs comes up with an unknown error message code 1015
    any ideas?

    See this post:
    TS3694 Trying to restore and update my iphone 3, the system tells me 1015 error What can I do?

  • After updating my iPod touch it won't turn on and the apple icon stays on. What do I do ?

    My I pod won't turn on. It was updated with new software and when it went to restart the apple icon comes up and stays up, but that's it. The only other action we found is that the charging indicator has come on but that's it. What should I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • TS1538 i cant get my phone out of recovery mode even after hooking up to itunes

    my phone had an update and i need help cause it wont come out of recovery mode

    Why not? What happens when you plug it into your computer and attempt to restore it with iTunes?

  • Cant get my phone out of recovery i get a error 21 or 1600 or 1601

    can anyone help get my i phone to recover

    Hello royoung77,
    As http://support.apple.com/kb/TS3694 suggests, the one thing all those error codes have in common is security software. In fact that is the only cause of error 21.
    Check out my page if you need assistance with disabling security software on a windows PC: http://www.errorchannel.net/itunes-error-1600-1601-1602.aspx
    Note:
    As per these forums terms and conditions section 2.6, while no advertising is currently present this may change in future, therefore:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • How can I get my ipad out of recovery mode without losing all of my data

    I plugged my ipad into my laptop to charge, it went into recovery mode, I cannot lose my data.  How can I save my data and get out of recovery mode?

    Unplug it from your laptop and try a reset:
    Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)
    If it goes back into Recovery Mode then unfortunately your data is already lost.
    Restore from your iCloud or iTunes backup.
    iOS: Back up and restore your iOS device with iCloud or iTunes

  • TS1398 How do I get my ipad out of recovery mode? I am not sure if I h

    I initiated the ITunes update on my iPad, and it went into recovery mode.  I cannot get it to restore.  It says that it cannot connect to the iPad server.  I have syncd my iphone with my pc, but my iPad is not responding.  I have tried pressing sleep and hold button at same time.  The apple appears but goes right back to the usb pic, an arrow, and the itunes symbol appear.Can anyone help me with this problem?

    Have you tried this:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • My iphone is stuck in restore mode ive tried to restore it with the latest version of itunes but it comes up with an error has occured

    tried to get my phone out of restore mode after i upgraded the firmware on itunes but now it wont budge and is stuck in restore mode ive tried evrything from pressing power and home button to downloading firmware and trying to restore it that way but half way through restoring a error message comes up. I am now stuck as to what to do next plse help

    That often indicates a hardware failure. make an appointment at the genius bar and take it in for them to look at.

  • I cant get my ipad2 out of recovery mode

    I have hooked up to itunes countless times and keep getting the same error codes 11 or 12. It started when I got the notification to update and so I clicked to update and let it run its course, it rebooted and gave me the connect to itunes screen. I was so excited to become apart of the apple family and now because of this I have slowly traded in all my apple products for Androids. I have nothing nice to say except the simplicity of the platform on apples were amazing but now having this experience with my ipad2 I will not switch back. If I can't get this ipad2 to get back running again I will continue to let others know how stupid apple products are. I dont plan on sending it in for service because it'll cost more than I paid for it. #RollingWithHonesty

    Did you check here to see if any of these suggestions will work for you?
    Resolve iOS update and restore errors - Apple Support

  • I logged in to itunes and ito download some music and accidently clicked dont show this message again to the 10.6.3 update can someone PLEASE help me i cant put songs from itunes on to my ipod now until i get the update

    i logged on to itunes to download some music on to my ipod touch and accidently clicked "do not show me this message again" and the message was for the itune update 10.6.3 now i cant put music off itunes to my ipod touch someone please help me!!!!!!!!

    Download/install the latest iTunes here:
    http://www.apple.com/support/itunes/

Maybe you are looking for

  • FI & MM Issue - Open GR for last Fis Year - Close / lock PO

    Hi I have the following FI / MM Issue. Open GR for last Fiscal Year cannot be reversed due to periods closed both FI/MM. This GR is related to Asset.   After receipt of GR, Asset has already been capitalized. The Inovice not entered thro' MIRO due to

  • Pivot a Table Records

    Dear All, Here is my Thread.. I have a one table [ABC] with Column Name [YEAR_MONTH], [RECORD_ID],[SALE],[MANAGER] The Distinct [MANAGER]s are -  [AAA],[BBB],[CCC] & [DDD] I want to pivot a report from TABLE in this way.. Please help..

  • Bringing Flash .swf files into Captivate

    Greetings, I use Captivate 2.0. I have been trying to bring a Flash .swf file into Captivate with very little success. The flash file is clickable (so that users can review case study information as they complete Try It simulations). When I bring the

  • Don't know how to calcualte the current page in smartform for second layout

    Hi All ,    Iam creating an smart form which contains two layout in a single form. I need the page number to be displayed as followes. 1st layout : 1 of 2                  2 of 2. in 2nd layout 1 of 2.                     2 0f 2. I dont have any issu

  • Java is not active in the application server

    Hi Experts We recently installed CRM 5.0.  Everything seems to have installed without any issues.  However, we are having a few issues the Java Virtual Machine (VMC).  When trying to access the VMC through ABAP side of CRM (SM53), it gives and error