TS3694 i have an ipad 3 that is stuck in "connect to itunes" HELP ME!!
The other night i was updating my ipad to ios 7.0.4, half way through the update my laptop died. which put my ipad in recovery mode. now when you connect to itunes it tells you to restore, i have tried restoring it 20+ times no luck just error code 4013. please help me i need this thing to work again.
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Confirm your iOS version
If you see the message “The required resource can't be found,” your device may have a newer version of iOS than is available in iTunes. Confirm the iOS version on your device by tapping Settings > General > About. If the version is newer than the latest released iOS version, your device may have a prerelease developer version of iOS.
Similar Messages
-
I have an iPhone 4 and am in Nepal. My phone was previously able to connect to wifi, but now is unable. I have an iPad and that is able to connect just fine. This problem is with every wifi hotspot I have tried so it is the phone not the modem.
Try Settings > General > Reset > Reset Network Settings.
-
I have a iphone 3 and its stuck on connect to itunes on the screen. When I connect it, itunes says it cant recognize my phone. What do I do??
Check to the right in the MORE LIKE THIS box. Your question has been asked and answered multiple times already.
-
The kids have 3 new iPad minis for Xmas, but our Mac will not recognize the devices when we connect the minis to it. The Mac/iPad says it needs a newer version of iTunes, but the Mac says that it has the latest version of iTunes. The kids can't transfer their music, books, photos, etc from the Mac, where everything is centrally stored, to their new minis. :(. Can any one help?
What itunes version do you have?
What Mac OS version do you have?
From the ipad mini box and web page:
Apple ID (required for some features)
Internet access6
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 2 or later
Download iTunes at "www.itunes.com/download -
My iPad is disabled and I cannot connect to itunes - help
I am trying to connect my disabled iPad to itunes to reset the forgotten password. As suggested in another dicussion I have tried unplugging the USB and holding the home button on the iPad for 10 seconds and then replugging the iPad into the computer but my computer says itunes could not connect to the iPad because it is locked with a passcode. You must enter the passcode on the iPad before it can be used with itunes.
Please help....Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
The wifi signal shows connected with a strong signal. I've tried rebooting my iPad as well as the router and it didn't solve the problem. Any ideas on cause and hw to fix it ? Thanks
Try this:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
help please
ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"
-
IPad 2 that is stuck in recovery mode
I have an iPad 2 that is stuck in recovery mode from failing an update. It does not show up in iTunes or in My Computer but the Apple Mobile Device USB Driver is installed and working properly. I plugged my iPhone up to the same computer and it works just fine.
I have tried everything I could find from all the forums and nothing has worked. Un-installed and re-installed iTunes, restarted Apple Mobile Device USB Driver, restarted the computer, held Home and Power buttons down.....I have no clue what else to do!
Can anyone help????1. Turn off iPad
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times -
My iPad 2 is stuck at "Connected to iTunes" part and won't move on...
I'm tryin to restore my ipad but it's stuck on 'Connected to iTunes' with the picture of the cable and iTunes..
It's connected to iTunes but nothing is showing up.. What should I do?The iTunes icon and cable mean that it's gone into recovery mode : http://support.apple.com/kb/ht1808
You will need to connect the iPad to your computer's iTunes and you should be able to use it to reset the iPad, and you can then restore/resync your content to it. -
I have an iPad 1 that is currently showing software updated at version 5.1.1. Is it possible to update to iOS version 7 on this device? My goal is to get Garage Band on this device and the app store is telling me I need iOS version 7.
Hi,
If you really need to upgrade you can save a bit of money and get an older version than the ipad Air.
First, you can sell your ipad 1 to places like gazelle.com, cashforyourmac.com, sellyour mac.com, or many others out there. The sites I listed give you cash. At this point gazelle.com is giving $70.00 for any ipad 1 in 'good' condition. And cashforyourmac will give you $25.00 over what gazelle.com or sellyourmac.com offers you. Shipping is free.
Then, with that money, go the the Apple online certified refurbished store. As an example, a new 64gb Air costs $699.00. A refurbed 4th gen 64gb costs $529.00 and a 3rd gen 64gb costs $499.00. Personally, I'd skip the 3rd gen. So if you buy a 4th gen 64gb at $529.00 minus what you can get from a sale to above, you can get an ipad 4 64gb for just over $430.00, a savings of savings of about $270.00. (A new 32gb Air is $599.00, a 4th gen 32gb is $449.00, and a 3rd gen 32gb is not on the site right now.) Google it and check if you can get better offers anywhere else. But getting one from the Apple refurb store gives you an essentially new ipad and using the above sites, you're not locked in with a particular site which will give you a gift card and restrict you to their store/site.
Each Apple refurbished ipad (any version) comes with a new front and back cover, a brand new battery, same return policy, and a full one year warranty with 90 days of phone support. Each comes in a white box like a new ipad with the wall charger and usb cable. The only difference is that it says in small print on the bottom of the box that it is Apple certified refurbished. Also, if you buy refurbs, be sure to check the store many times a day. They can come and go quickly, so when you see what you want, buy it right away. Shipping is free and pretty fast. (We bought two a year and a half ago and they have been great!)
Hope this helps. -
HT1349 i have an iPad 2 that disconnects from Safari and App Store regularly. Is there an easy fix
I have an ipad 2 that disconnects frequently from Safari and App Sotore. Any known fixes?
Yes.
http://ipadinsight.com/ipad-basics/how-to-add-a-website-to-your-ipad-home-screen / -
TS3274 I have an iPad 2 that was dropped and the glass broke.
I have an iPad 2 that was dropped and the glass broke around Christmas break. I took it to a local computer repair company and they changed the glass. However, ever since that time I have had some problems with the wifi. I do not have the range I once had? For example I can walk out of the room that my verizon jetpack is in and loose connection. I have also had issues with my Keynote presentations loosing connectivity to Apple TV through the blue tooth. Q What are my options beside getting a new iPad?
Some iPad users have been able to revive their dropped iPad. Turn the iPad over and give it a HARD SLAP on the back. May take several slaps.
dropped iPad
https://discussions.apple.com/thread/4474708?tstart=30
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
iPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help
Hi ..
Follow Apple's instructions for recovery mode here > iOS: Unable to update or restore
You can restore from a backup. -
I have an iPad 2 that just stopped working...no display...won't turn on...tried to sync to iTunes and couldn't because I need to put in my passcode. There is no display, so can't do this. Am dead in the water. Does anyone have ideas to solve this issue?
Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
I have an ipad mini that won't power on. It was turned off to charge overnight. In the morning it was warm and now won't turn on no matter what I do. I've tried resetting using the power / home button combination and nothing works.
If you have owned the device, as in purchased from Apple, less than a year then there will be no charge to repair, or most likely, replace the device. If you have had the device more than a year you will be charged an out of warranty cost for replacement ($219 I think) and that is much cheaper than a new device. If you have Applecare+ then you have an additional year of coverage and the replacement will be $49 or $79 depending on when you got the Applecare.
Maybe you are looking for
-
How to assign the output of a function to a text area: a PLSQL challenge
I have a function that returns a PLSQL table of varchar4(4000) Here is its signature in a package: create or replace package researcher_request_pk is TYPE query_table_type is table of varchar2(4000) index by binary_integer; FUNCTION RequestSQL(P_RRQ_
-
Displaying one page at a time in a form
I have a bunch of different single-page forms for people to fill out but they only will be filling out one of them at a time. I want to create one pdf document that contains all the different forms available (about 50 different pages) but only displa
-
Hello , I have seen the How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework by Stefan About erroneous message in EOIO to be cancelled in order to process the remaining messages which are in struck state in the given queue...But if we
-
Hi people, I'm using BEx analyzer, and I need to expand a hierarchy in my report, but when I double click in the nodle, doesn't appear any information. It only appears if I filter manually in the filter box. For example: in report there is "People's
-
Valuating audit results / questions
Hi, in ecc 6.0 qm, audit plan, audits were created, questions created against ea audit. pls advise how to valuate the each question of particulra audit? also advise is it mandatory to assign questions to each audit. in case if not mandatory, how to v