TS3694 I keep getting 'ipad software could not be updated at this time as ipad update server could not be contacted or is unavailable at this time' have tried everything?? Help
Hi after updating my iPad to Os6 I get to the point where it needs to be restored? It does a download bar and says 'Extracting software' then I get the message 'iPad cannot be restored at this time because the ipad update software server could not be contacted or is temporarily unavailable' .. I have been to the trouble shoot section ..as it has an error code .. but when you click on that it does nothing .. I have turn off my firewall etc.. just keep getting that message?? HELP
Me too! I have iPad 2 on iOS 6. Not sure what to do.
Similar Messages
-
Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.
I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta. -
For some inexplicable reason, Safari 5.1 will not open in Windows 7. It appears in task manager briefly and then disappears. No windows open; I have tried everything. Any ideas??
I fixed the issue. It was related to the DEP settings on my windows machine.
-
Have tried turning explorer of and on again and other recommended solutions but nothing seems to work. Any suggestions?
David,
Can you please try Right-Click Setup.exe > Run As Administrator
and see if it helps.
Thanks,
Anwesha -
i also downloaded the newest version of itunes
Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
I need help. I have a Window's 8 computer and a 6th generation Ipod nano. I have reinstalled Itunes multiple times and have read all the troubleshooting ideas to do it, but my ipod is still not being recognized. This is not the first time I've plugged the Ipod in. I need help
This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Device Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.
-
HT4097 I have tried everything, my ipad is still on connect to itunes, help
My ipad has been stuck on connect to itunes for about 2 weeks now, i have tried everything. help me please
-power off the device first then while the device is still off hold the home key while connecting it to the computer and keep holding the button so that iTunes detects the device in recovery mode, iTunes should have a popup that tells you to restore
-
Previous Recipients will not delete - have tried everything
I've removed from Previous Recipients list in the address line, in the drop down menu... I have removed the email addresses from the Address Book and still they keep coming back. On several occasions I'll delete it repeatedly from all areas and it keeps coming back as if I did nothing... It's like Groundhog Day....
Hi... As mentioned, I have tried everything - probably about 30 times... Have removed from Menu/Window/Previous Recipients, removed from Mail address, removed from contacts...
-
I have an ipad 3rd gen with ios 5.1.1 and I can not update it to ios 7. It will take 13hours and when I try it stalls out halfway through and says software update failed. I have tried everything. Any help?
it actually needs more space than that. The file size is your 65 mb is probably the ota incremental file size. The full package is 700 mg, and the system needs 3 gig of free space to unpack and install.
There is a fairly good discussion here
https://discussions.apple.com/message/23680750#23680750 -
I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"
Check out this thread: https://discussions.apple.com/thread/1421870
It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work. -
Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Trash the Preference file:
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
•I only use PAL (25fps)
Yours Bengt W -
I keep getting a message "safari cannot open page [page name with header information] because you are not connected to the internet. Then I check CNN for a time stamp, and I am connected to the internet. I have reset everything suggested in other posts, ensured any other device that could be hogging bandwidth is off, the router is reset, the iPad is reset. The other devices are not having this problem, and it happens on both places I use the iPad, the university library, (getting a second degree after a change in a long time career and at home. Any insight into this issue would be appreciated.
Saing yu tried everthing provides little information to us. We do not know what you tied.
Have you tried:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on your router- Resetting network setting: Settings>General>Reset>Reset Network Settings
The toubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
- Does you iPod conenct to other networks?
- Do other devices connect to your network? -
I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password. I have tried everything. I even changed the password, nothing is working. Both are 4G, my ipad is an Air and my phone is a Iphone 5. I can get connected to other wifi on these features but not with my jetpack. Please help, I need to use this feature soon. Thank you so much
Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect. -
I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update
I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and some people said that they worked.
Here is the original Link:
https://discussions.apple.com/thread/2151777?start=0&tstart=0
OK, this worked for me:( Original Post by r0tt3n4pp13)
1. Save iTunes install file to your desktop.
2. Disconnect from internet.
3. Disable Firewall/Security software.
4. Run install. Note that it installs Application Support and a bunch of other software this time.
5. Run iTunes.
6. Enable Firewall/Security software.
7. Reconnect to internet.
8. Download Watchmen Director's Cut post haste.
OR!
(Original post by Cr4z33)
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally. -
All of a sudden I keep getting message that my computer must be restarted and it freezes. I restart it and within minutes it happens again. This is a 27 inch iMac with latest system and software. Any ideas of what is wrong and how to fix it?
10.7.5 is not the latest system, 10.8.3 is. However your message sounds like a Kernel Panic, does the message look similar to About "You need to restart your computer" (kernel panic) messages? If so, then if you can get the machine to restart normally then please post the Kernel Panic Report which you can find by following directions in How to log a kernel panic. Please post back with the KP log, and we can take a look. However if the machine continues to not restart then my guess is a hardware failure suck as a hard disk or failed RAM in which case you should take it into your local Apple Store or AASP for repair.
-
Keep getting the Software License Agreement
I have a payed license for using all of the Adobe CC, but although I installed everything correctly I'm keep on getting the Software License Agreement window with the accept-button on it once in a while. Although I accepted it a million times now it keeps on coming back. Not only with illustrator, but also with photoshop, AfterFX and so on.
Also sometimes I have to re-login to the cloud to use the Adobe CC. Is that normal? I was hoping this was only needed once, but once in a while I have to login again to use Adobe CC update-panel.
It's getting really annoying. Anybody got the same problem? How did you solve this?Martino,
I believe this is one for this forum,
http://forums.adobe.com/community/download_install_setup
or for Customer Care (just go straight to I Still Need Help),
http://helpx.adobe.com/contact.html?product=illustrator&topic=download ing-installing-and-setting-up
Maybe you are looking for
-
Where do I add my custom jar library files
I need sone extra .jar library files, fo my application to compile. e.g lotusxsl.jar, xerces.jar what should be the location of these files, in the .ear file, and also in exploded directory?
-
JTable does not display table column header
I create a JFrame with a JScrollPane in which I place a mainPanel (=JPanel ) consisting of a leftPanel (=JPanel ) and a rightPanel (=JPanel ). I add to the rightPanel a JTable using constructor JTable(tableModel dm). I overrode method dm.getColumnNam
-
Submit or Import / Export Memory?
Hi Forums, I have to two reports which are exactly the same. One is called from the Portal (which is a Function Module) and one is run in ECC (so it is an ABAP report). These both exist now today. To avoid duplicate effort I would like to have the Po
-
Can you tell me how to sync my iPOD with my new computer. I downloaded iTunes but the library is different.
-
Hello, we have package errs and procedure error and we use it to call all errors in our DB. I have to locate all the occurences of this procedure. I'm querying user_source to get the result. SELECT text FROM user_source WHERE text LIKE '%errs.error(%