TS3694 i update my iphone4 4.3.5 to 6.0 , now it is not working , wht i do now?
i update my iphone4 4.3.5 to 6.0 , now it is not working , wht i do now?
See
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom
Similar Messages
-
Help...tried to update my iphone4 to ios7, but my phone is now stuck on the "connect to itunes" screen...when connected to itunes via usb, it does nothing. My phone is stuck...HELP...!!!
Hello there, johnshaft357.
The following Knowledge Base article should provide some assistance with your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
I tried to update my iPhone4's, but get the following error message: iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.
The solution will be found here, select your computer type and software.
http://support.apple.com/kb/TS2529 -
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
after updating to ios 6.1.3 seems my factory unlocked 3gs is not working, i cant even restore..the message displayed is "itunes software update server cannot be contacted" 'm using latest itunes with winows xp system...........please please help me
There is no such thing as a "Factory Unlocked iPhone "
They are either locked to a carrier who may at some stage offer unlocking
or sold direct to a user by Apple (from their own Stores or online .)
Those iPhones are NOT locked
Where did you get your iPhone
If from Apple try this
http://support.apple.com/kb/HT1808 -
After updating my iphone 6 to ios 8.0.2, the iphone is not working at all!!
after updating my iphone 6 to ios 8.0.2, the iphone is not working at all!! the apple logo shows up for a few seconds. then the screen goes red !! after it restarts and it do the same!! please help.
Well, just for future reference, any time you do an iOS upgrade, it is a good idea to back up your device just prior to doing the download. You can back it up to iCloud or to iTunes. Personally, I prefer to back it up to iTunes, and then to do the download via iTunes as well. Doing a Wifi download can, by the very nature of the OTA environment, run into more issues than a hard-wired one via iTunes.
If it is just a version release (like 8.0.1, or 8.0.2), then I might download it via Wifi, since the content is not likely to be very large. But for any major new release (7 to 8, etc.) it is always a good idea to do it via the USB cable rather than OTA.
I would also suggest that you set up your device to do automatic iCloud backups. Whenever it is turned on (i.e., not manually powered off - it can be "asleep"), plugged into a power source, and connected to Wifi, it will do an automatic backup every 24 hours. Mine usually backs up at night.
But even with my iCloud backup in reserve, I still did an iTunes backup before I upgraded to iOS 8. I like having the extra security of that second backup to choose from, should I need it. Here is a support article comparing the two types of backup:
Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
Sorry you lost your stuff. Hope then next update goes better for you!
Best of luck,
GB -
After updating my iPhone 4 to iOS7, the controls on the headset are not working anymore. However, the controls are working on my friend's iPhone 5. Is this a common issue?
ofel wrote:
After updating my iPhone 4 to iOS7, the controls on the headset are not working ..
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
i have an apple iphone4 im facing the problem that my phone senser is not working when i rotate the phone in videos or music play there is working from the senser can u tell me what can i do for this....
If you double tap the home button, and then swipe your finger to the right, make sure you DO NOT have the Lock Orientation button enabled.
You know it is disabled if there is no padlock in the middle of the icon. -
In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I updated to ios 7.1 on Thursday. My ipad basically does not work any more. I am running around in circles on this site and on other "forums" trying to fix. ??? Don't have time for this.....Any advice appreciated.
give us more to work with in terms of info then "basically does not work any more"
it can be from it's on fire to the a key on the onscreen keyboard don't respond -
I updated my iPad 4 iOS 8.0.2 and the camera does not work, ... Please help
I updated my iPad 4 iOS 8.0.2 and the camera does not work and hangs and unconnected, .... Please help me in this question,... Thanks in advance
You're welcome, but I didn't do anything. Try closing the camera app completely and reset your iPad and maybe that will help.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Updated my iPhone to new iOS6 and my Memory Loader app does not work! Is there a fix for the problem as it seems I am not the only one coming across this issue?
Other than what you have already done, you should clear the cache from your browser and, if you use it, your Facebook app. Also, deleting old texts can free up some room.
-
I updated my iphone4 to the 7.0.4 update. on my phone screen it says connect to itunes. when i connect to itunes my phone isnt doing anything. what do i do? i cannot use my phone!!!
Hey vsu16,
Does iTunes recognize your iPhone at all? It sounds like this is the image you're seeing on your screen to connect your phone to iTunes:
If that looks right, you'll want to follow along with the steps in here;
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If you see the Connect to iTunes screen but the device does not appear in iTunes, follow these troubleshooting steps if you're using a Mac, or these steps for Windows computers.
Welcome to Apple Support Communities!
Best,
Delgadoh -
After updating my iPod touch 3rd generation to IOS5 some default apps are not working (anymore)
Hi,
I updated my iPod touch 3g from IOS 4.x to IOS 5 last week and since then my iPod makes troublle!
First of all, during the update I did not see any Problems. After the update, I mean the step where the data will be restored to the iPod, I synchronized some APPS at the same time, maybe that was a big mistake. My iPod makes hard resets many times in a loop until it frozes.
So the only thing I could do here is pressing the home button and the power switch at the same time until it gets rebooted. The sync started again and it looked like everything runs fine.
As I tried to use iMessage first time I realised the first Problem: I am unable to loginto iMessage with my Apple ID. My Apple ID runs fine, I can by Apps and so on. I also enabled iCloud to see that my Apple ID is ok. But logging into iMessage I put in my Apple credentials and Password, click on next, wait 3 seconds and the screen flips back. So this feature is not working.
Next issue I see is that randomly my iPod hard resets itself. Even if I don't do anything with my iPod I can see that it resets itself, booting with the apple icon. This happens minimum three times a day... (Exception Type: EXC_BAD_ACCESS (SIGSEGV), Kern_INVALID_ADDRESSat 0x00000000)
Today I tried YouTube, an internal Application which I cannot reinstall. It's not working anymore, starting YouTube says: Unable to connect to YouTube!
I have no clue whats going on here because email and web is working fine.
In my eyes I would like to reset the whole device to a state before running IOS5 and I would try the update again. But my Question is how to reinstall IOS5?
If IOS5 will not run smoothly on my iPod, I would prefer to backref to iOS4x.
Is there anyone who could help me out here?
Thanks,
DanielFound the rootcause. The battery was damaged and unable to have enough power to keep the device alive. After changing the device problem is solved.
-
since updating to Mountain Lion my HP 8180 all in one printer refuses to work it show as "pipe broken" and printer as idle can anyone help please
do you mean the printer? ive already tried that without success any further help apprecaited
Maybe you are looking for
-
Will the Apple iPad Camera Connection Kit work with my iPhone 4s (7.0.4)?
The online 'Chat' representative told me the Camera Connection Kit would not work with my iPhone 4s. The telephone support rep told me it would work!
-
PSE 9 Organizer error codec trying to add an Elements audio file to slide show
I am using PSE 9 to build a slide show. When I add audio, I can use mp3's from my music library in the slide show without any issues ... but I am getting the following error when I try to add an Elements audio file (example " A _Taste_Of_Sicily.mp3)
-
Hi in my application users can add objects move them, and select another object and move that. the problem is that im not sure how to move the object once its live in the world below the selectedObject is the BranchGroup containing the model. im new
-
Hany any plan to certify Oracle 11gR2 to run on SAP BW ?
Dear Expert, SAP plans to certify Oracle 11g Release 2 (Oracle 11.2) during Q1 2010. How about the SAP BW ? Please advise. thanks Stone Lee
-
Why can't I download the latest BIOS for the H50-55
I can't download it, the page just refreshes.