TS3694 Installation and Updation error again and again!!

I tried to update my ipad3 to iOS7, its failed and showed an "installation and updation error", then i had to go to the service center to get it fixed. Now, again as i try to update it to 7.0.2 its stuck on the installation screen n showing the same error. Is there any way i can get it fixed at home? And why is it happening for the second time?

found that if bonjour (mdns) is unloaded.. i get this error.
This is poor implementation on apples part.
to re-enable
run in terminal
sudo launchctl load -w /System/Library/LaunchDeamons/com.apple.mDNSResponder.plist

Similar Messages

  • TS3694 IPHONE 3G CANNOT RESTORE AND UPDATE ERROR CODE 1015

    IPHONE 3G CANNOT RESTORE AND UPDATE ERROR CODE 1015

    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743
    ERROR 1015...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • Can not update error 1602 and can not restore error 1604 what is the solution

    Have a IPod touch 4, can't update (error 1602) and can't restore (error 1604) any solution?

    try this support article.

  • I was updating my iphone 4 and an error occurred and now i can't restore my iphone

    I was updating my iphone 4 and an error occurred and now i can't restore my iphone and it wont show up in my itunes or on my computer

    http://support.apple.com/kb/HT1808

  • Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre9

    Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre elements 9 on mac how can this be repaired

    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 9 with the 9.0.1 update).
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    And some other questions...
    •What are you editing, and does your video have a red line over it BEFORE you do any work?
    •Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
    •Which version of Quicktime do you have installed?

  • Did up date for 10.7.4 to 10.7.5 and update for Aperture and now  Aperture doesn't open.  How do I fix?

    Did up date for 10.7.4 to 10.7.5 and update for Aperture and now  Aperture doesn't open.  How do I fix?

    I heard dump the app and reinstall?  How do I go about that?

  • HT4623 I was installing the ios 6 on my iphone 3GS and an error occured and since then it's hanged up and not working. Please suggest some solution

    I was installing the ios 6 on my iphone 3GS and an error occured and since then it's hanged up and not working. Please suggest some solution

    the same thing here! each time its suppose to register with my network, it cant. im wondering if its a hardware problem

  • Generating and updating URS, FRS and test

    Hi folks,
    I am trying to find some material in this regard i wanna know what is generating and updating URS, FRS and test script documents
    Pls anyhow help me its very urgent
    Thanks in advance and waiting for u r answer
    prasad

    Hi,
    More information about the issue....
    We are creating the test scripts both manual and automated.
    Manual
    Using the Tx. STWB_TC, we are creating the manual test cases. While doing so we will provide the test case desctiption
    Automated ECATT
    using the Tx. SECATT, we are creating the Test Configuration. We are providing description through the documentation option.
    The SAP format for both documents is
                   &DESCRIPTION&
                   &PREPARATION&
                   &ENTRANCE&
                   &REALIZE&
                   &CHECK&
                   &FURTHER_HINTS&
    But we want the format to be
                   <DESIGNSTEPS>
                   <INPUTDATA>
                   <EXPECTEDRESULT>
                   <TARGETSYSTEM>
    So we want to update the format / template to reflect the changes.
    Please guide us to do so.
    Thanks and Regards
    Saman

  • I was in the process of jailbreaking and updating my ipod and when i was updating it,it went into recovery mode and now i cant get it out of recovery mode so what can i do??

    i was in the process of jailbreaking and updating my ipod and when i was updating it,it went into recovery mode and now i cant get it out of recovery mode so what can i do??

    Go elsewhere:
    Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • How can I upload my RAW files from my Nikon D750 to my MAC computer? I now have Camera Raw 8.7.1. and updated my camera and still not working:(

    How can I upload my RAW files from my Nikon D750 to my MAC computer? I now have Camera Raw 8.7.1. and updated my camera and still not working:(

    Which version of mac os x do you have?
    Which version of photoshop are you using?
    Do you get any message when you try to open the files into photoshop?
    Did you use Nikon Transfer to get the files from your camera to computer?
    Did you try the File>Get Photos From Camera in Adobe Bridge?

  • Just restored and updated my ipod and now when I connect it to my computer I get a message saying "this ipod cannot be used because the Apple Mobile Device service is not started" what does this mean?

    Just restored and updated my ipod and now when I connect it to my computer I get a message saying "this ipod cannot be used because the Apple Mobile Device service is not started" what does this mean?

    I'd start with the following document with that one:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • HT1349 My acc was disabled and I changed the password and updated financial info and it doesnt work

    My account was disabled and I changed the password and updated finacial info and it still does not work

    No, we can't.  We're all users here.  Contact iTunes support.  Use the "Contact Us" link on the bottom left hand corner of this page.

  • TS3694 I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at al

    I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at all, and I really have no idea what to do. It is just a black screen, and occasionally the white apple will appear as if it were turning on, but it won't turn on. I just need some suggestions on what to do!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • When I went to Creative Cloud, I tried to install and update for dreamweaver and photoshop.  Error m

    Why is it when I tried to install updates for Dreamweaver and Photoshop...it failed?

    Pioneer97 in order to determine why the update failed it will be necessary for you to review your installation log files for the updates.  For information on how to locate and interpret your installation log files please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  Please feel free to post any specific errors you discover to this discussion.

  • Download update error 3259 and 3253

    please look at this, i keep getting those errors 3253 and 3259
    i do get those at work on windows and home on my mac

    Changing my DNS settings worked for me (3253 errors on my MBP). I followed the instructions here:
    http://appletoolbox.com/2010/09/itunes-10-the-network-connection-was-reset-fix/
    Hope that helps!

Maybe you are looking for

  • How do I get my itunes certificate if they do not send it to me.

    I purchased an itunes certificate last night and I never received my confromation number. I don't know if this is the email address problem or what. I was charged but can not get to my money. Please advise.

  • Airplay display question

    I have been looking all over and I'm guessing it's either a silly thing or something that can't be done... With the iMac and AppleTV I'm trying to get the iMac to mirror through Airplay on my HDTV. To use as a computer, not just to stream. Of course

  • Conduit is messing me up.

    I just want it gone. " Open your Firefox browser and type "about:config" in address bar Now you can see a list of items "Preference Name" and its values. Now type "search" in the filter box on top of that window... Check all strings contents as "COND

  • Compressor 4 Clustering

    I am looking to find out if since QMaster has been built into the same interface as Compressor, has anything changed in its stability? In the past I have spent several hours trying to get Compressor to cluster multiple computers together to render ou

  • Will Firefox cancel out my Trend Micro Titanium security that I already have installed on my computer?

    I can't add more than that, I just want to know if your security package will mess with the one I have already installed? Since I haven't downloaded Mozilla Firefox yet.