TS3694 iPod touch gets error -1303 when attempting to restore after update (W7)
iPod touch gets error -1303 when attempting to restore after update (W7). This error is not shown anywhere in the specific list. Have done all recommended recovery methods (reboot, update iTunes, restart iPod) to no avail. What is next?
Usually the 1303 error is in regards to a corrupted or missing backup of your iPod Touch. Try removing or moving the backups to another location and then try to restore your iPod once again.
See this article for information on where backups are stored.
iTunes: About iOS backups
B-rock
Similar Messages
-
I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled firewall 8. even tryed putting mobile in DFU mode to restore it not of this worked so please help me
please replyyy i'm stuck on this like whole week
-
HT4623 I keep getting error 21 when trying to restore and update my 4 day old iPhone 5?
I try to update and restore my new iphone 5 becasue it is stuck in recovery mode but i come across error 21 message every time during restore. VERY FRUSTRATING as i only got this wonderful product 3 days ago!
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
Error -50 when trying to restore after update
I updated my iPhone 3G to iOS 4.1 and it failed the restore, error -50, after it updated. I have done some research but am still having the same issue. I have uninstalled/reinstalled iTunes, performed andactory restore after booting in "repair" mode, and multiple restarts. The phone has still not restored my data. Ideas?
I updated my iPhone 3G to iOS 4.1 and it failed the restore, error -50, after it updated. I have done some research but am still having the same issue. I have uninstalled/reinstalled iTunes, performed andactory restore after booting in "repair" mode, and multiple restarts. The phone has still not restored my data. Ideas?
-
I updated itunes to 10.4, my ipod touch was wiped clean then errored (2003) when attempting to restore. Now my ipod is clear, when I turn it on I get the "Connect to itunes screen", this never goes. I have tried disabling my antivirus, to allow me to restore with no luck.
When I go into itunes I get the message - itunes has detected an ipod in recovery mode. You must restore this ipod before it can be used with itunes,
how am I supposed to do this ?
I would rather take the ipod to someone to do the restoration - I still have itunes with all of my downloads on my computer, I dont want to risk losing this as I can re-install onto my ipod when it is sorted.Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
Above from:
http://support.apple.com/kb/TS3694
It may be more than you security software.
Do you have access to another computer you can use to restore the iPod to factory defaults/new iPod? -
In iTunes software get error message when attempting to access iTunes Store. Could not connect. Unknown error occurred (0xx800903318). Make sure your network connection is active and try again...NG
Hello there,
Thanks for using Apple Support Communities.
Since this error 0x800903318 combined with the network connection error message is occuring when you're trying to connect to the iTunes Store, I'd like you to please follow the steps in the article linked to below.
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
Cheers,
Alex H. -
TS1538 Why am i getting error 9006 when trying to restore my ipod 5th gen?
Why am i getting error 9006 when trying to restore my ipod 5th generation?
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process. -
Why do I get error 1303 when trying to install either Reader X or XI on Win 7??
Why do I get error 1303 when trying to install either Reader X or XI on Win 7??
Hi kbannister1
Please refer to the following forum thread on error code 1303 when trying to install Reader x or XI.
http://forums.adobe.com/thread/670046
Hope this helps.
Regards,
Sumit Singh -
Getting error message when i am trying to update the excel file using script task in ssis package
Hi Guys,
I am getting error message when I am trying to update the excel. Please find the error messages as below
Error at Update File [Update File]: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Application' is not defined., ScriptMain.vb, 32, 32
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Workbook' is not defined., ScriptMain.vb, 33, 25
Error at Update File [Update File]: The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.
Warning at Update File [Update File]: Found SQL Server Integration Services 2008 Script Task "ST_050fcae972904039b4f0fe59b7528ece" that requires migration!
and the code that I am using is
Dell - Internal Use - Confidential
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.Office.Interop.Excel
<System.AddIn.AddIn("ScriptMain", Version:="1.0", Publisher:="",
Description:="")> _
<System.CLSCompliantAttribute(False)> _
Partial
Public Class ScriptMain
Inherits Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
Enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
End Enum
Public Sub Main()
Dts.TaskResult = ScriptResults.Success
'Dim proc As System.Diagnostics.Process
'kill all instances of excel
'For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")
' proc.Kill()
'Next
Dim excelnacomm As
New Microsoft.Office.Interop.Excel.Application
Dim wbnacomm As Microsoft.Office.Interop.Excel.Workbook
wbnacomm = excelnacomm.Workbooks.Open("http://test.xlsx")(renamed
the excel)
wbnacomm.RefreshAll()
wbnacomm.Save()
wbnacomm.Close()
excelnacomm.Quit()
Runtime.InteropServices.Marshal.ReleaseComObject(excelnacomm)
End Sub
End
Class
Please let me know what could be the reason
Smash126Download:
Microsoft Office 2010: Primary Interop Assemblies Redistributable
How to: Add or Remove References By Using the Add Reference Dialog Box / How to:
Add and Remove References in Visual Studio (C#)
Olaf Helper
[ Blog] [ Xing] [ MVP] -
I get Error 20 when I try to download updates for installed Apple apps on my IMac. I have two users on the IMac, and I resolve the problem by clearing all cookies on both users Safari, opening and closing the App Store for each user, shutting down and restarting the IMac for each user, until finally the download works. There must be an easier way. I also have an Air, where I have no problems whatsoever. Both machines have Doorstop and MacKeeper with the same settings, so I have ruled those programs out as the cause. I believe iot is because I have two users - any ideas?
Please read this whole message and be sure you understand all of it before doing anything. Back up all data before making changes to your settings.
Write down the server addresses.
Click Cancel to close the Advanced sheet. Unlock the preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Open the DNS tab again and change the server addresses to the following:
8.8.8.8
8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself.
2. I’m not advocating Google or anything else as a DNS provider; the server addresses are offerred merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist. -
My ipod touch gets stuck on the same song, even after I uncheck the loop button. I am trying to play it in my 2007 vw with a power adapter that allows it to charge and play through my navigation unit. Please help. Thank you.
Yes, first try deleing both songs.
If still problem
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, ,make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Error -1 when trying to restore and update iphone 4s
After trying to update to new software 5.1 i got Error -1 when trying to restore and update iphone 4s via itunes
here part of iphone upadate log may help, i could not post all log it's too long
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11207986 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: BEGIN: Sending 1 Images
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeMaverick
bbupdater: Hello response boot mode: ETLSAHModeMaverick
bbupdater: Hello reserved fields: 02
bbupdater: Starting Maverick Protocol
bbupdater: Sending Erase Response: Length 12 Type 161
bbupdater: Erase EFS 0
bbupdater: Checking Manifest Request: Length 40 Type 162
bbupdater: Sent Manifest with length 586
bbupdater: DBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: OSBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: AMSS_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: Sending Hash Response: value 1 success 1
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModePending
bbupdater: Hello response boot mode: ETLSAHModePending
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'OSBL'...
bbupdater: 0x6e050 of 0x6e050 (100 percent)
bbupdater:
bbupdater: Took 0.229405 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeComplete
bbupdater: Hello response boot mode: ETLSAHModeComplete
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'ELF'...
bbupdater: 0x32000 of 0x12c0000 (1 percent)
bbupdater: 0x6013f of 0x12c0000 (2 percent)
bbupdater: 0x885000 of 0x12c0000 (45 percent)
bbupdater: 0x1085000 of 0x12c0000 (88 percent)
bbupdater: 0x119b000 of 0x12c0000 (93 percent)
bbupdater: 0x12b1000 of 0x12c0000 (99 percent)
bbupdater: 0x12c0000 of 0x12c0000 (100 percent)
bbupdater:
bbupdater: Took 6.138110 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: END: Sending 1 Images
bbupdater: Waiting 4 seconds...bbupdater: OK
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: Modem booted
bbupdater: Ping failed, 9 tries left
bbupdater: Ping failed, 8 tries left
bbupdater: Ping failed, 7 tries left
bbupdater: Ping failed, 6 tries left
bbupdater: Ping failed, 5 tries left
bbupdater: Ping failed, 4 tries left
bbupdater: Ping failed, 3 tries left
bbupdater: Ping failed, 2 tries left
bbupdater: Ping failed, 1 tries left
bbupdater: Ping failed, 0 tries left
bbupdater: END(kBBUReturnIOError): Preparing Initial stage
bbupdater: END(kBBUReturnIOError): Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: bbupdater error: kBBUReturnIOError
0: RamrodErrorDomain/3ec: update_baseband: failed to perform next stage
1: BBUpdater/10
unable to convert ramrod error 1004
attempting to dump restore log
writing log file: /mnt1/restore.log -
I havev a new iPod touch 4th gen. When trying to sync to iTunes first time, I got this error msg: "Pairing record missing. Can't sync." Nothing in Support addresses this. Help!
See if the previous discussions with the same error will help you. Some of those are listed on the right side of this page under the heading "More Like This".
-
Keep getting error message when attempting to buy a song (Error 5002)
This error message seems to pop up with just this one song (says there is an issue with the iTunes store and that it is an unknown error) and it has not changed this status for a month now. I have the latest iTunes and there were no problems in updating/getting other songs from the store.
So what's up?
Thanks,
MHHey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M. -
i keep getting error 3194 when i try to upgrade my iphone4 on ios 5.1.1 to ios6.what should i do?
From the page which you posted your question:
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Maybe you are looking for
-
Macbook Pro keeps restarting while connected to TV
My Macbook Pro Mid 2009 keeps restarting with an error message when I play videos from it onto my TV. Below is the Error Log. Does anyone have any input or suggestions? Extra Info: OS X 10.9.5 2.8 GHZ Intel Core 2 Duo Just upgraded to 8 GB ddr3 ram
-
How can i protect J2EE applications from piracy?
I m looking for solution to protect Web application from piracy. I want my application run on web server for which it is built, & it musn't run on any other web server. how can i protect my web application from piracy?. Our .Net applications we prote
-
Transferring iTunes from Mac to PC with library already on a network drive
I recently bought a MacBook Pro and need to transfer all of my iTunes content from my Windows laptop. This is for use with my retina ipad mini. I already had my iTunes library located in a folder on a NAS drive. Note I don't have any iTunes server or
-
How much does 5GB icloud hold?
I keep getting alerts that my iCloud is almost at capacity. 5GB sounds like so much storage. I can't believe that a normal person such as myself would even get close to using it all. I have no documents, only 800 pictures and perhaps the same amou
-
Change Tracker Authorization error
Dear All, We have set up MDM change tracking application in SAP MDM 7.1 SP6. Inspite of having all Admin authorizations rights in the portal, I receive error : You do not have the authorization to use MDM Change tracker application. Where are the au