TS3694 my iphone 4 will not turn on and will only come on dfu mode when its pluged into the power
what can i do will i haft to send it in or what
You need to restore from DFU mode. Follow these instructions.
Similar Messages
-
My iphone 4 is not turning on and it is hooked up to a charger and still wont turn on, what do i do?
My iphone 4 is not turning on and it is hooked up to a charger and wont doing anything. what is wrong?
See if this Assistant can help
Frozen or unresponsive iPhone
From Here
http://www.apple.com/support/iphone/basics/
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
what if your iphone 4 does not turn on and u have no way to get the serial number what do u do
If you eject the SIM card tray the serial number is also there. It's tiny, but there.
When my iPhone won't turn on I first charge it with a known good cable for a few hours. If nothing after that I begin a warranty lookup for repair. -
my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me
I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped
-
I'm getting this problem when trying to update my iphone 3gs it says that the iphone software could not be contacted and I went on youtube got some advise to go into my hard drive to fix the error I have nothing in my host file please help me if you can this is all new to me.
Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About? -
What do you do when your iPod touch 5th generation will not turn on, and it isn't in recovery mode?
Today, my iPod touch 5th gen wasn't turning on, but during school earlier today it was working just fine. When I got on the bus, it wouldn't turn on? I got home and I plugged it into the charger and tried to see if it would turn on that way, nope. Also, there would be no way for it to be in recovery mode, because of the fact that the home button is pushed in and wont work. I've had my iPod for 2 years, is it just old and decided to give out?
See this previous discussion
Turn on without Home/Power Button -
ipod touch does not turn onand i get empty batterywith small thunderbolt at the bottom wen i try to charge it
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
For some reason some of my apps suddenly went dark and say waiting. I tried syncing with the computer and updating all the apps but they stayed dark. The individual apps in question say they are updated when I looked at them. Any ideas? Do I need to just delete them off the IPad and start over?
Hi you guys,four days ago my FT and iMessage worked well on my iPhone 5 IOS6.1.3,but my phone Number did not in the caller ID loop,so I turned both of them off,when I wanted to turn it on again,but failed,I tried so many times,but make no difference,It shows me"waiting for activation".Then I found the solution on internet,and you know there are many possible solutions,just like:
1.change the wifi DNS to 8.8.8.8,8.8.4.4.and you must turn your cellular ON.
2.restore the phone setting.Settings>>General>>reset>>all the phone setting.
3.restore the network setting.Setting>>General>>reset>>the network setting.
3.reset the network.
4.reset your Date&time.Setting>>Date&Time>>set automaticlly>>ON.
5.change another network to activate.
6.take out the sim card to activate.
I did everything,but nothing happend,it still"waiting for activation"
And today afternoon,i try to activate again,when i turn iMessage on,it activate successfully.OMG,it is really amazing.and the same to my Facetime.
I am so exciting and strange how it happen...
I followed all the setting above 1.2.3.4.5.6,the only difference is i turned the "enable 3G" OFF(Settings>>General>>Cellular Data>>Enable 3G>>OFF),but it keep ON before now.
seriously,i am not sure if the "enable 3G"causes this problem,but it really happened to me,so you guys can try if you have the same problem,
hope my answer is helpful for you.
Message was edited by: housing Alex -
While iPhone 5 is locked my texts and calls only come through intermittently
So, this has been happening to me for almost a year now, I have been through everything to try and fix it, I am about to upgrade to the soon to be announced iPhone 6 but I would like an answer on it at least.
While my iPhone is locked I do not receive calls or texts, now this doesn't happen 100% of the time but probably about 80% of the time. I have had my phone replaced, my sim card replaced, restored my iPhone and been through countless hours with my network provider to try and resolve this, still to this day it happens.
Anyone have the same issue? And please don't say it it DND (Do Not Disturb) because it is not, I have literally tried everything I can think of, I am also a technical analyst by trade so I have not been naive about trying to sort this out.
To add, I live in London and it happens everywhere, it is not only happening in a certain area.
Please someone help.
iPhone 5 64GB, IOS 7.1.2, Three Mobile Network.I'm talking about the notifications in the lock screen, yes. However, I have the 'View in Lock Screen' option on for all email accounts and it has always been this way, it's just that in the past few days this hasn't been functioning as intended. Now emails only come through once the phone is unlocked, which is annoying as I now have to manually check my mail, meaning that I may miss important emails.
With the calls, it's happened 100% of the time, again over the past few days, all in the same location which I have never had issues with.
Because both of these issues have arrised recently, I feel like it might be an issue with the hardware? -
Please answer my question asap!! And when I fixed it the guy said there was nothing broken on the inside (didn't fix it at apple btw)
Take it back to whoever "fixed" it, or buy a new phone. Apple won't touch it now.
-
I am not able to downgrade my storage. The process does not complete on the last page.
LONG STORY---It took 78min16sec but I did get my storage downgraded. I called 1-800-MY APPLE (1-800-692-7533). After 5 min I explained my issue (same as yours - couldn't get DONE to click) and they said they needed to transfer me to Apple Care. 15 minutes later Apple Care said they needed to transfer me to iTunes ETA 15 more minutes. W-A-Y more than 15 min later, the Apple Care person, who did check back with me throughout the wait time, handed me off to iTunes. Apple Care and iTunes had talked and iTunes had my problem in the process of being taken care of as we began talking. The people were all very nice, knowledgeable and helpful. It took a LONG time, but the problem is now solved. Actually iTunes said that my storage had already been downgraded. iTunes also processed a storage upgrade refund for me.
SHORT STORY - Phone 1-800-MY APPLE (1-800-692-7533) and ask to speak to an iTunes Store Support Advisor to downgrade your iCloud storage plan. -
Qosmio X305 will only boot in safe mode or when the graphics card disabled
Hi All
I am having a very concerning issue with my laptop (Toshiba Qosmio X305). It will only boot in safe mode or if I disable the graphics card.
Awhile back I upgraded the drivers for the nVidia 9800M GTX from the nVidia website, it worked fine for awhile, but then it started crashing randomly by giving me a full screen of random color then switching off. I fixed this by rolling back to the previous version of the drivers (the drivers that came with the laptop software).
After that it working perfectly for months but yesterday my machine started crashing and I could not get it to boot correctly.
I have completely deleted (not just a quick format) both the hard drives that came internally in the laptop and I have installed a clean version (the out of the box option) of the x64 Vista that came with the laptop from the recovery disks I created. After I did the install, it boots fine as only the standard VGA device is used, as soon as I installed the driver off the drivers and applications disk it would not boot correctly:
Just after the status bar comes up and it is about to show the windows logo, just before login, I get a black screen. I can hear that it is booting fine and I can even log in to windows and by memory make things run, but I can't see anything. I then got the latest drivers, again from the nVidia website and they are not helping at all.
My system is as follows (nothing has been added, its is just how I got it):
Vista Ultimate x64
4.00 GB RAM
Intel Core 2 Quad
Like I said previously it is a clean install of the operating system, I have not added any programs, except for installing and then updating the display drivers.
Any help would be much appreciated!Hi buddy,
It seems that this is a typical example, that only pretested display drivers from Toshiba should be used. Why?
The nVidia drivers are not pretested and they dont have an overheat protection. So for me it sounds like that the nVidia driver has destroyed your graphic card. That means no driver will help you and reinstallation of the whole system too.
I think the only option is replacing the graphic card. Therefore you should contact an authorized service provider in your country. Here you can search:
http://www.csd.toshiba.com
Explain the whole story and then you will see, what the technicians say. If your notebook is under warranty, hopefully this will be covered too. Normally other display drivers you have to install on your own risk
Good luck! :) -
My ipod will only work in disc mode
My iPod will only work in disc mode, when i take it off of disc mode it appears with the apple sign but nothing else -
help please.Yes a Restore will erase your iPod. But this shouldn't be an issue since you obviously must have your music in your iTunes library or backed up somewhere else, RIGHT????? After all, it would be silly to have all your music on just the iPod and no where else, RIGHT?
Patrick -
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
The wi-Fi button on my IPhone 4S is greyed out and will not turn on and therefore I am not able to receive wi-fi. How can I fix this problem?
Follow the steps in the article below to try and resolve the issue:
iOS: Wi-Fi settings grayed out or dim
If after all the steps the issue remains I'd suggest to book an appointment at an Apple Retail Store to have your iPhone evaluated or contact AppleCare for assistance.
Hope this helps
Maybe you are looking for
-
Help needed with OSX Server 10.5.8
We're running a headless Xserve (RackMac3,1) with OSX Server 10.5.8 that did its job flawlessly. Now we want to update the Perl software from 5.8.6 to 5.20.0 or newer. After downloading the suitable version from CPAN we tried to install, but get the
-
ONLY house in my street that is lumbered with path...
Hello all, I've just joined right now in a wave of fury/desperation. For years I've put up with having a pretty appalling service of 512kb/s, firm in the belief that it was because my entire street was confounded to this terrible, terrible speed (alm
-
BAPI_SALESORDER_CREATEFROMDAT2 using Promotion Codes
Can anyone provide information or point to where information may be found for BAPI_SALESORDER_CREATEFROMDAT2 structure ORDER_ITEMS_IN has a PROMOTION field. Would like to know if anyone has used this field and how SAP uses it.
-
Convert Smartform in WORD Document
Hi Gurus How can i convert a smartform Output in a word document ??? and download into PC.. Regards Gregory
-
Configuration error opening video file.
i get the configuration error that says the software requires certain hardware or software, which is missing. AGP graphic card i had an ati 9800 graphic card on my g4, now i get the error code. how can i solve this since my g5 duel has the apple grap