TS3694 my itunes wont connect with the apple server

my itunes wont connect to apple servers, since i got new windows 7 pc, i keep getting an error message half way through A SYNC OR EVEN WITH NONE OF MY DEVICES ATTACHED, it wont connect, error says to check my connection and try again, but my conection is fine!!???
ive tryed uninstalling it and reinstalling itunes, but same problem, at my wits end, plz help!!!!

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than Network connectivity tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Similar Messages

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

Hi, stig2013.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Cheers,
Jason H.

I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information

I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information (it just shows a blank white screen with "iphone" in the centre".

I imagine a ton of people are attempting to activate after the update, and the server is getting overloaded. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
I am also providing you with a screenshot of what appears! I need photos on my iPad2
Message was edited by: angana

You don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it.

Hi, My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??

Hi,
My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??

While connected to iTunes, try...
http://support.apple.com/kb/HT1808

ITunes wont connect to the Store

Hi My iTunes wont connect to the store which is more then a bit annoying. Every time I try i get "An Unknown Error occurred (-3221)" If anyone can help it will be very much thanked.

See if this helps: iTunes for Windows: -3221 error displays when accessing iTunes Music Store

I have a 3G Ipod, for the longest time I have not been able to connect to the apple server. I am able to connect to wifi, grouse web pages however canot conncet to iTunes. I have rebooted, any every other thing I can think off.

I have a 3G Ipod, for the longest time I have not been able to connect to the apple server. I am able to connect to wifi, grouse web pages however canot conncet to iTunes. I have rebooted, any every other thing I can think off.

Can't connect to the iTunes Store
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Sync failure because itunes cannot connect to the sync server PLEASE HELP!!

HELP! I cannot get my info back into my iphone.
During sync I get an error message that says 'sync failure because itunes cannot connect to the sync server''
I have had this problem today so i restored the iphone and it has synched the ipod portion but will not sync calenders, contacts , email accounts or bookmarks.
The restore erased all of these and now i cannot replace them.
Thank you in advance for any help in solving this crisis.

I had the same problem (not from day one but within the past couple months). Anyway, I wish I had made note of everything that the quick-and wonderful-Apple support did when I finally decided to give them a call today-after getting tired of not being able to update calendars and contacts and not seeing any helpful info here-unfortunately, I continue that legacy (as I can't remember everything I had to do to fix-sorry) Ultimately involves creating a new user I called mine IPHONE...then doing some of this and that-and finally merging info and going to "Terminal" and typing in some code...then deleting some of the old files, Took about twenty-minutes on the phone. Sorry I didn't think ahead for others and write al this down...but just know the Apple people were great. I talked to a gal for about ten minutes very methodically trouble-shooting. When nothing worked she shifted me over to a real nice guy who calmly and politely guided me through all the steps to fix this annoying problem. I hate to say it, but just get on the phone and-if you have the same experience as me-you will get 5 Star treatment and your sync will work like a dream. Every time I have to contact Apple Support (which isn't that often) my experience is nothing but the best. Unbelievable customer service! Methodical, Personable, and truly knowledgeable! There is a fix and it works like a dream. Not that hard but you'll need customer service to walk you through it-as I can't (sorry I can't be of much help...) Good luck!

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

The MOF Compiler could not connect with the WMI server

I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.

Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

SQL 2012 installation Error-The MOF compiler could not connect with the WMI server

Hi all,
I am getting below error while installing SQL 2012 Dev edition in Win 8.1 Pro.
I am facing lot of issues while installing SQL 2012 in Win 8.1 Pro.Any other steps we need to take to install SQL 2012 in Win 8.1.
Thanks in advance.

Installation:
Installation for SQL Server 2012
Hardware and Software Requirements for Installing SQL Server 2012
Installing the .NET Framework 3.5 on Windows 8 or 8.1
About "The MOF compiler could not connected with the WMI server" error message:
Please, verify the Windows Management Instrumentation has status "started" and is set with Startup Type "Automatic". (Alberto Morillo, SQLCoffee.com).
José Diz Belo Horizonte, MG - Brasil

MS SQL Server 2008 not getting installed properly - MOF compiler could not connect with the WMI server

I am trying to install SQL Server 2008 in my local machine. However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?

"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?
can you check below two links.Make sure previous failed installation is removed completely.
http://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server#
Solution given by Connect MS is:
Possibly the issue was caused by uninstalling from add-remove programs - at any rate, using aaron bertrand's suggestion below fixed the issue. Also of note - I used the local admin for the install.
http://sqlblog.com/blogs/aaron_bertrand/archive/2009/02/20/the-xp-sp3-msxml6-sp2-sql-server-debacle.aspx
yes - remove msxml6 and any other half installed portion of sql 2008 and REBOOT and install sql
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

JMX Connectivity with the Adminstration Server - Weblogic 9.x

When using the java naming provider url in Managed Server startup script, or in server start tab when using node manager, or loading it from properties file (for deployment) we see below JMX Warning message in Managed Server startup log saying JMX connectivity exception with Admin Server. This is BUG in Weblogic 9.x release and there is CR open on this issue.
<May 19, 2009 10:35:25 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.149.181.55:20001
for protocols iiop, t3, ldap, http.>
<May 19, 2009 10:35:25 AM EDT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ManagedServer1_1
" for domain "wls923_domain1" running in Production Mode>
<May 19, 2009 10:35:25 AM EDT> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster
successfully. Log messages will now be broadcasted to the domain log.>
<May 19, 2009 10:35:25 AM EDT> <Warning> <JMX> <BEA-149509> <Unable to establish JMX Connectivity with the Adminstration
Server AdminServer at service:jmx:t3://AdminServer:20000/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic.management.m
beanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:151)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:326)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.getDomainMBeanServerConnec
tion(RegisterWithDomainRuntimeService.java:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblog
ic.management.mbeanservers'; remaining name 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
>
<May 19, 2009 10:35:26 AM EDT> <Notice> <Cluster> <BEA-000102> <Joining cluster Cluster1 on 239.192.23.2:7001>
- - Tarun

When using the java naming provider url in Managed Server startup script, or in server start tab when using node manager, or loading it from properties file (for deployment) we see below JMX Warning message in Managed Server startup log saying JMX connectivity exception with Admin Server. This is BUG in Weblogic 9.x release and there is CR open on this issue.
<May 19, 2009 10:35:25 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.149.181.55:20001
for protocols iiop, t3, ldap, http.>
<May 19, 2009 10:35:25 AM EDT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ManagedServer1_1
" for domain "wls923_domain1" running in Production Mode>
<May 19, 2009 10:35:25 AM EDT> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster
successfully. Log messages will now be broadcasted to the domain log.>
<May 19, 2009 10:35:25 AM EDT> <Warning> <JMX> <BEA-149509> <Unable to establish JMX Connectivity with the Adminstration
Server AdminServer at service:jmx:t3://AdminServer:20000/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic.management.m
beanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:151)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:326)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.getDomainMBeanServerConnec
tion(RegisterWithDomainRuntimeService.java:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblog
ic.management.mbeanservers'; remaining name 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
>
<May 19, 2009 10:35:26 AM EDT> <Notice> <Cluster> <BEA-000102> <Joining cluster Cluster1 on 239.192.23.2:7001>
- - Tarun

Apple TV not able to connect to the Apple Server

Not able to restore the Apple TV to factory settings....it says "unable to connect to the apple server". What should I do?

I too did what was recommended and still keep getting the "AppleTV cannot connect to the server at this time' message. If anyone has a solution to this issue...please advise

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

TS3694 my itunes wont connect with the apple server

Similar Messages

Maybe you are looking for