TS3694 Need help immediately! I am at the end of my rope (in a foreign country).

i have researched to death the dreaded 1015 error, while trying to restore my iphone 3gs. i was on 4.2.1, and tried to restore through itunes to the newest 6.1.3. this phone was previously jailbroken and unlocked. any help would be greatly appreciated! i am in a foreign country, and need my phone for many things, especially to navigate from place to place.

Hey, I hope I am not too late.
In order for your port forwarding to work, you have to point it to the IP address of your router. On the setup page, about the middle of the page, there is a 192.168.1. then a box; place a value in the box, which will complete the ip for your router's port forwarding.
save it then, try again. Just did that on mine, I found alot of information on the www.portforward.com web site.

Similar Messages

HELP!!! AT THE END OF MY ROPE!!!

I've tried "restore to factory settings" with no avail. I am tempted to "Erase all data and petitions" but will that also mean that the system recovery petition will also be erased? I don't want that but I don't know what else to do!

I've tried "restore to factory settings" with no avail. I am tempted to "Erase all data and petitions" but will that also mean that the system recovery petition will also be erased?
Try the factory restore once again. Power off your unit, press and hold down the '0' (zero) key, power on, keep holding the power key down until you see the Toshiba Recovery menu, return your unit to its factory default out-of-the-box setup.
The recovery utility, run from the HDD recovery partition, will not wipe out the recovery partition. The recovery utility, run from a set of recovery disks, will actually rebuild the HDD recovery partition.
But yes, all other user data and partitions will be wiped out.
If you need to post back here we need your full model name/number from the Toshiba label on the bottom of your computer.
Mike

Hi i need help on BAPI to Update the ADRT & ADR6 tables

hi,
i need help on BAPI to Update the ADRT & ADR6 tables
these are the fields to be updated
ADRT-Remark Table
ADR6-SMTP_ADDR
ADR6-DFT_RECEIV
Please guide me what parameters to be passed to update
ADR6 & ADRT tables

Look at this function Group
<b>BUBA_3                         SAP BP: External BAPI Function Modules     </b>
BAPI_BUPA_ADDRESS_ADD          SAP BP, BAPI: Add Address
BAPI_BUPA_ADDRESS_CHANGE       SAP BP, BAPI: Change Address
BAPI_BUPA_ADDRESS_GET_NUMBERS SAP BP, BAPI: Read Address Numbers
BAPI_BUPA_ADDRESS_GETDETAIL    SAP BP, BAPI: Read Address
BAPI_BUPA_ADDRESS_REMOVE       SAP BP, BAPI: Delete Address
BAPI_BUPA_ADDRESSES_GET        SAP BP, BAPI: Determine All Addresses
BAPI_BUPR_CONTP_ADDR_ADD       SAP BP, BAPI: Add Contact Person Relationship Address
BAPI_BUPR_CONTP_ADDR_CHANGE    SAP BP, BAPI: Change Contact Person Relationship Address
BAPI_BUPR_CONTP_ADDR_GETDETAIL SAP BP, BAPI: Read Contact Person Relationship Addresses
BAPI_BUPR_CONTP_ADDR_REMOVE    SAP BP, BAPI: Delete Contact Person Relationship Address
BAPI_BUPR_CONTP_ADDRESSES_GET SAP BP, BAPI: Read Contact Person Relationship Addresses
BAPI_BUPR_EMPLO_ADDR_ADD       SAP BP, BAPI: Add Employee Relationship Address
BAPI_BUPR_EMPLO_ADDR_CHANGE    SAP BP, BAPI: Change Employee Relationship Address
BAPI_BUPR_EMPLO_ADDR_GETDETAIL SAP BP, BAPI: Read Employee Relationship Address
BAPI_BUPR_EMPLO_ADDR_REMOVE    SAP BP, BAPI: Delete Employee Relationship Address
BAPI_BUPR_EMPLO_ADDRESSES_GET SAP BP, BAPI: Read Contact Person Relationship Addresses
Look also at OSS <a href="https://service.sap.com/sap/support/notes/306275">Note 306275 - Transferring address data</a>
Regards

I have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest from itouch to laptop please??

i have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest of the songs (from my cd's) from itouch to laptop please??

See this previous discussion:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Need help to log off iTunes - the tab with the current Apple-iD is "greyed" out.

Need help to log off iTunes -> the tab with the current Apple-iD is "greyed" out. Can anyone help me?

Do you have Restrictions turned on?

Need help , when we turn on the mac i can hear the fan and there is a picture of the world flashing for about a minute or 2 on start up . But the fan I can hear non stop ?

need help , when we turn on the mac i can hear the fan and there is a picture of the world flashing for about a minute or 2 on start up . But the fan I can hear non stop ?

A flashing question mark or globe appears when you start your Mac

I need help with my Iphone 4 reset cause I will activate it in other country

I need help with my Iphone 4 reset cause I will activate it in other country
Thanks

Help you what?
You have provided no information about your issue or what you are trying to do.

HT5429 I am trying to find areas in the local community in India, however despite doing the saem, it picks up areas of foreign country. Map was working fine before i downloaded the IOS 6 version

I am trying to find areas in the local community in India, however despite doing the saem, it picks up areas of foreign country. Map was working fine before i downloaded the IOS 6 version

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

Do you have any ideas why Motion 5 would run slow on a computer? I have an Imac with 8Gigs of ram, and plenty of hard drive space, but it still gives me the beach ball when I add a few lights and effects. I'm at the end of my rope.

Do you have any ideas why Motion 5 would run slow on a computer? I have an Imac with 8Gigs of ram, and plenty of hard drive space, but it still gives me the beach ball when I add a few lights and effects. I'm at the end of my rope.

You probably don't really need 1080 at 60 for your finished projects but since you're just starting out with Motion, you need to lower your expectations. A long way. 1080 is about 2 million pixels per frame, DV is only about 400,000. That's not just five times as many pixels for the Mac to track; everything in video is exponential.
Explore the training tutorials available by Mark Spencer. You will get an idea of how his super powerful machine reacts with the software.
Adding a light roughly doubles the processing time over flat scenes. Two lights increases processing again. Reflections require processing the lights and then calculating the reflections so add another quarter of the time required for flat scenes. Add camera movement, motion blur, and depth of field and you need exponentially more processing time for every frame. The preload of renders into RAM is one of the cooler features of Motion, as comapred to After Effects, but that takes tons of time, to.
Try working in ye olde DV resolution for a few days. Get to know the software's limitations and what gets imposed by your Macintosh. Step up to 720p/30 and see how things slow down.

6.0.5.20, at the end of my rope

I installed 6.0.5.20 and it has not allowed my 5G or Nano to connect to iTunes. All I get is the message: "The software required for communicating with the iPod is not istalled correctly. Please reistall iTunes to install the iPod's software."
I've tried reinstalling it. I've tried removing and reinstalling it, I've tried the McAfee firewall (it has full access to iTunes), I've tried the Quicktime standalone install, I've tried the MSCONFIG setting, I've tried removing iPod updater 2006-28-06, I've tried sending an e-mail to Apple. I can't restore my iPod, because now I get an "iPod service error" when I try to run any updater, new or old. Absolutely nothing has worked.
Does anyone have any ideas? I'm at the end of my rope with this.
Windows XP
5G and 4GB Nano Windows XP

Ok, I solved my problem. Here's what I did: I went through all the steps in the article linked above and nothing seemed to work. Part of those steps has you remove iPod stuff from your computer. I would follow the steps for "Removing iTunes." From what I could figure out, it was the iPodService.exe that was causing my problem because it would never show up under the "Processes" menu in the Task Manager. I downloaded version 6.0.4 from oldapps.com. Then I reloaded my iPod software from the CD that came in the box, my Nano had iPod update 3-26-06 on it. When I opened iTunes, everything worked fine. My God it took forever to get that done. I've been working on this for a week.
5G and 4GB Nano Windows XP

Need help recording three shows at the same time

I have the FiOS DVR, and have a problem this TV season. There are 3 shows that we watch that are on at the same time. if we are home that night, we can record two on the DVR and watch the other in another room. Not ideal, but we can handle it. But if we are out, we are hosed. I have an old series 1 Tivo that I would think I could factor in here....which I could timer record on a different TV. Any way to do it on my regular TV? Not sure how I could hook up the Tivo with the DVR and the rest of it.
Thanks!
Alan

DocAlan02 wrote:
I have the FiOS DVR, and have a problem this TV season. There are 3 shows that we watch that are on at the same time. if we are home that night, we can record two on the DVR and watch the other in another room. Not ideal, but we can handle it. But if we are out, we are hosed. I have an old series 1 Tivo that I would think I could factor in here....which I could timer record on a different TV. Any way to do it on my regular TV? Not sure how I could hook up the Tivo with the DVR and the rest of it.
Thanks!
Alan
I have a similar setup with a Replay.
You will need to get a Verizon Digital Adapter for $3.99 per Month and an IR Blaster for your Tivo.
Connect the Digital Adapter (DCT-700) to the FIOS Coax (May need to use a Splitter). Connect the Composite Out cables from the DCT-700 to the Tivo. Connect the IR Blaster from the Tivo to the front of the DCT-700. Configure the Tivo and tell it you have FIOS Cable and Digital Adapter. You may need to find the right codes to use to control the FIOS box from the Tivo.
Once you get it configured you will be able to tell the Tivo to record the 3rd program and it will switch the box to the channel and record it. If the box is near your other Verizon STBs you will need to hide it or cover the IR Sensor so that the remote for the main STB does not control the Digital Adapter.
As an added bonus you can connect the Coax Out from the DCT-700 to your Main TV if it has PIP and now you have a 2nd input source to make PIP work.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

I need help with viewing files from the external hard drive on Mac

I own a 2010 mac pro 13' and using OS X 10.9.2(current version). The issue that I am in need of help is with my external hard drive.
I am a photographer so It's safe and convinent to store pictures in my external hard drive.
I have 1TB external hard drive and I've been using for about a year and never dropped it or didn't do any thing to harm the hardware.
Today as always I connected the ext-hard drive to my mac and click on the icon.
All of my pictures and files are gone accept one folder that has program.
So I pulled up the external hard drive's info it says the date is still there, but somehow i can not view them in the finder.
I really need help how to fix this issue!

you have a notebook, there is a different forum.
redundancy for files AND backups, and even cloud services
so a reboot with shift key and verify? Recovery mode
but two or more drives.
a backup, a new data drive, a drive for recovery using Data Rescue III
A drive can fail and usually not if, only when
and is it bus powered or not

Hi, I need help extracting a video in the best HD, got this not so great test:

Hi everyone,
I've recently purchesed the Premiere Elements 9,
I use the Panasonic HDC HS700 which is a great camera...
I tried like a million times to export a video with different HD settings but I can't find the ultimate to show the real quality of My HDC HS700
check out this clip I just made:
http://www.youtube.com/watch?v=w0Jo6UQY9No
I used MPEG export with 1280 resolution,
what are the parameters that need to be adjusted to get the best out of the export?
I've tried the H.264 codec but it keeps messing around with the size of the video so it plays like a square 4:3 really messes up the original 16:9
though I was using 16:9 settings...
I hope I could get some help here.
Thanks in advance,
Radion.

For the Export choices, one starts with what their delivery scheme is, say to BD disc, or perhaps streaming Video for the Web. That will dictate much of what one will choose next.
Within those two delivery schemes, there are choices also. For the BD, if one is working exclusively in PrE, then Export/Share is not necessary, as PrE has BD authoring capabilities. If one is using another program to author, then there are two allowed choices: BD-compliant H.264, or HD MPEG-2, which is BD-compliant. For streaming media, then there are many choices, from WMV, to Flash (FLV), to DivX, to H.264. Each has pluses and minuses, and much might depend on the Web page, on which one will display the AV file. If, for instance, the Web page has an embedded QT Player, then the H.264 in a MOV wrapper is probably the best bet, while if there is an embedded Flash player, the FLV would be the choice. If one wishes a self-contained Flash player, then a program, like Adobe Flash, can bundle the FLV into an SWF file.
Knowing exactly how you need to deliver the output file will get you (and us) started on picking the best format/CODEC and then the internal settings for Export/Share.
Good luck,
Hunt

I need help in sync music from the ipod store that I have purchased to my ipod.

I need help syncing my music onto my ipod. Anyone there to help?

There is a few events where I could see this happening...
It's possible if you computer is not authorized with your iTunes Store account it may not have transfered your purchases from the iPad to the computer. To check, Open iTunes> Select the "Store" menu along top of the program and select Authorize this computer. Sign in with your AppleID and password, this will make sure your computer is authorized for the future so you can transfer purchases from your device.
http://support.apple.com/kb/HT1848
However, if your Movies are missing now you'll need to request to redownload or "regrant" them. Please send an email ticket into iTunes Store via...
http://www.apple.com/support/itunes/
Select "Video Purchases" in the grey boxes, then "Lost or Missing Items", then click the link to "Email Us" on the right. Fill out that form and the folks at the iTunes Store should get back to you less than 24 hours.

I need help to convert photos in the .swf format to a format that will open on iOS

I need help converting photos in the .swf format to a format that will work on my Mac. Thanks

SWF is a Flash file that should be able to be opened with your web browser on your Mac. Probably not on iOS though.
You will likely need to find the source file for the application that created the SWF and the image will be in that. You could then export/extract the image and have it as a stand alone file.
It does look like there are applications that can do what you are looking for though: https://www.google.com/search?q=SWF+to+JPG

TS3694 Need help immediately! I am at the end of my rope (in a foreign country).

Similar Messages

Maybe you are looking for