TS3694 New itunes updates installation error message 0x800736FD. Has anyone encounter such problem before? appreciate your advice

Hi guys
I have this error message when installing new Itunes updates:
HResult: 0x800736FD.
Can anyone help me? thanks

I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

Similar Messages

  • I have a 2nd generation iPod touch.  I have not updated the software from version 2.2.1.  When I connect to iTunes to update to 4.2, I keep getting an error message.  Has anyone else had this issue and figured out a way to fix it?

    I have a 2nd generation iPod touch.  I have not updated the software from version 2.2.1.  When I connect to iTunes to update to 4.2, I keep getting an error message.  Has anyone else had this issue and figured out a way to fix it?

    Error -1
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Also see:
    -1 error
    -1 error too

  • TS3694 I am getting a message that says, " The iPad could not be restored. An unknown error occurred (24).  Has anyone encountered this problem?

    Has anyone encountered this problem.  I am desperate!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
     Cheers, Tom

  • When I try to authorize home sharing in iTunes, I get error message 5506. What is the problem?

    When I try to authorize home sharing in iTunes, I get error message 5506.
    What is the problem?

    Home Sharing
    Setting up Home Sharing on your Computer
    http://support.apple.com/kb/HT4620?viewlocale=en_US&locale=en_US
    Understanding  >  http://support.apple.com/kb/HT3819
    How to  >  http://support.apple.com/kb/HT2688
    Troubleshooting  >  http://support.apple.com/kb/TS2972

  • HT1657 I cannot play my rented movie because itunes cannot locate where the original file, has anyone face this problem before? Where can I find the location of the downloaded movie?

    I cannot play my rented movie because itunes cannot locate where the original file, has anyone face this problem before? Where can I find the location of the downloaded movie?

    What did you use to download it with? iPad? iPhone? Computer?
    If it's an iPad/iPhone, play it using the videos app.
    If on the computer, look on the left side of iTunes in the library under movies.

  • I recently purchased a Seagate Backup Plus Slim portable hardrive. Despite Seagate claiming the product is compatible with OS X 10.5 I cannot get the installer to launch. Has anyone encountered the same issue and found a viable solution?

    I recently purchased a Seagate Backup Plus Slim portable hardrive. Despite Seagate claiming the product is compatible with OS X 10.5 I cannot get the installer to launch. Has anyone encountered the same issue and found a viable solution?

    A Gigaware 9pin to 4pin fw cable solved my issue. The Rocketfish fw cable was crap. And that thing cost me $24.99 from Best Buy. Getting my money back for sure.

  • I getting no sound out of the USB connection in my car from my new iPod Classic. Has anyone encountered this problem?

    I getting no sound out of the USB connection in my cars from my new iPod classic. The song name artist display on the console in the car but no audio. This is happening on 2 cars - Nissan Rogue and Acura TL. My older iPod classic played fine in these cars. Has anyone encountered this issue?  

    I have a similar problem with a 160 gb Classic, about 5 years old - if I move the plug one channel may be heard and tehn the other. The interface works but not the sound. Different ipods eg nano work perfectly.
    The two cars I have are an Audi and a BMW and both have manufacturer connectors

  • During the installation of iTune update received error message C runtime Library error 7 1114, R6034. Unable to now open my itunes. How do I fix this?

    During the update of iTunes to my desktop, I received the error message: C:runtime error. R6034 Error 7 1114. What does this mean and how do I fix it?
    Not that computer savvy so please walk me through the fix in simple terms. Thanks

    Hey lucky scruffy,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • ITunes 7.1 Software Update installation error message

    I've tried to install it, but Software Update keeps giving me the message:
    The update "iTunes" could not be verified and expanded correctly.
    Make sure you have permission to write to /tmp/502/TemporaryItems/com.apple.SoftwareUpdate, then try again.
    I repaired permissions with Disk Utility but it didn't help. The funny thing is that this update arrived together with QuickTime 7.1.5 which installed with no problem. 3+ GB free on HD.
    Any ideas? Thanks!
    Original flat-panel iMac still runs great, if a bit slowly   Mac OS X (10.3.9)  

    I am happy to report that I ran "System Restore" and restored to a date prior to my attempted iTunes update. 
    SUCCESSFUL!!! 

  • ITunes update causing error messages

    Hi all.
    This is my first time posting, please forgive any faux pas.
    I installed the new update from itunes.
    It would not install and told me there was a problem, but i did not write down the problem. I restarted the computer in the hope i could fix it with a tweak.
    However i then received the APSDaemon.exe System error.  The programme can't start because MSVCR80.dll is missing from the computer. Try reinstalling the programme to fix this problem.
    I uninstalled iTunes, tried reinstalling but keep getting  a message to check my privileges.
    I have done a sfc/scannow, in command prompt in safe mode and normal mode, which is not showing any problems.
    Used the MS fixit tool to completely uninstall iTunes, tried reinstalling, still the same message.
    i seem to have followed all the advice advertised under the APSDaemon.exe. error messages.
    Restarted, 4 more attempts and installing with the admin message. I am using the admin account to do all of this in.
    It has now been 3 days since it happened and i still cannot find a cure.
    I have had suggestions to plug my phone into the pc in the hope it may resolve the issue, but i am worried in case it mucks up the phone as well.
    There seem to be a lot of people who have suffered the problem but most of the recommended actions have not helped resolve my issue.
    ( it could be me i guess).
    Thanks for any help offered.

    Me again.
    I have spent all day working on this problem.
    I have finally fixed it by myself!!
    As no one responded to my plight, and in case anyone else has the same problem, here is how (i think) i sorted it.
    The only way that i could reinstall iTunes successfully was to go into the control panel and under publisher uninstall each and every item that had an Apple inc. name by it.
    After reinstalling it, i had to then download quicktime etc and reinstall that too.
    Hopefully when i restart the computer all will be ok.
    If not i will be back.
    Thanks anyway

  • HT202213 Trying to activate home sharing with new iTunes update, says error #5506, any ideas?  Worked great before this update!

    I'm trying to use home sharing with the latest iTunes update.  Keep getting error message 5506-any idea how to resolve this error and share at home?

    Well, I tried a few other things and one worked but again just the first time I tried connecting to the desktop PC with iTunes. I flashed my router with the latest update and the ATV2 could see the iTunes library and I was able to play media. Later in the day I was going to show off to my daughter that I had fixed it and, to my dismay, no go. I tried opening the suggested ports but no luck.
    I then tried loading iTunes on a Win7 laptop and it works perfectly with the ATV2. Both the laptop and the ATV2 are connected to the router wirelessly while the Desktop is connected to the router by Ethernet. Not sure if this is part of the issue as it sounds like this didn't work for others. The only other difference between the laptop and desktop is that the desktop has Win7 SP1 loaded while the laptop does not; now I'm scarred to load it though I don't think that's the issue. All in all, a very vexing situation. Hopefully Apple comes up with a solution soon.

  • ITunes 7.7 - Error Message: AppleMobileDeviceHelper has stopped working

    Can anyone help with the above problem. I installed 7.7 two days ago and now cannot stop these error messages from popping up.
    I can play iTunes, but the whole time it is running this message pops up repeatedly. So far I have let it get to about nine messages and then I have closed it down.
    I have tried reinstalling, repairing and removing iTunes, but when I reinstalled, the problem came back.
    I'd be very grateful for any help with this.
    Many thanks.

    With that one, see the following announcement:
    http://discussions.apple.com/ann.jspa?annID=640
    ... and for additional advice on using MSConfig, see:
    Using MSCONFIG to troubleshoot conflicts in Windows Vista

  • HT1925 When trying to uninstall iTunes I get error message 2324 saying it indicates a problem with the package

    I have an iPod classic.Somehow it stopped interacting with my computer.When i try to click on itunes i get an error message.When i connect my iPod to the computer it does not show the music i have on it.I tried to uninstall itunes and all apple related programs but I get an error message 2324 when I try to uninstal iTunes

    Let's try the fixit from the following Microsoft document with that one:
    Fix problems with programs that can't be installed or uninstalled

  • I get the following error when I attempt to set up a cluster in Qadminister.  it gives me an error-13. Has anyone encountered this message and know of the fix? Thank you.

    This is the error message I receive:
    Error occurred while creating new cluster: CNFSSharedStorage::_subscribe: command [/sbin/mount Users-of-AccessVisions-Mac-Pro.local:/Volumes/Tom Morris 3 TB Drive/MK 43/E1298583-AD8A54CA/shared] failed, error = 13
    Has anyone had this error before and know of the fix? Thank you.

    Hi Captain,
    Don't panic, it's just the preview cache. Find your catalog on the hard drive - usually in the Pictures folder called Lightroom 5 Catalog.lrcat by default. You'll see a *Previews.lrdata folder there. Rename it and restart LR.
    LR will have to rebuild previews, but then everything should be ok. You can let LR rebuild the previews as you need them, or you can select them in Grid view and go to Library menu > Previews > Render Standard Sized previews.
    Once you're happy that everything's rebuilt, you can delete the one you previously renamed.
    Cheers!
    md

  • TS1702 I have an I-pad 4.  I tried downloading OS 6, and part of the way in the download process I get an error message.  Has anyone else experience an error message?

    I get an error message when downloading iOS 6.  Anyone else have the same problem?

    I think you may have been thrust into the future Teelea.
    Now that I got that out, and I know this is a little off topic of the title of this postig but - I am having a serious problem with iOS 6 on my iPhone and iPad. For the iPad, which is what we are discussing here, since the update, any app that relies on a "play" button will not play. I hit the sideways facing triangle and it changes for 2 seconds to the "pause" symbol as if it is going to play, then changes back to the arrow. This is literally in every app that plays audio or video.

Maybe you are looking for

  • Late 2009 Mac Mini EFI 2.1 Firmware update not needed/already factory installed?

    Here has been my issue of trying to figure out if Mac Mini can handle (and fully use) 8GB of RAM with my current EFI version.   I want to upgrade to 8GB on a LATE 2009 Mac Mini that currently has Boot ROM MM31.00AD.B00 and was told to update with EFI

  • SVN repository on local IP address?

    I installed all the remote/SVN stuff I could find in Eclipse, and I'm trying to create an SVN repository on a local intranet IP address, but no matter what I do it gives me an error "Location information has been specified incorrectly" with a more sp

  • JWindow, JPopupMenu and flicker.

    I've trawled through earlier posts to these forums and found problems which, from their description, appear similar, but I haven't been able to find any answers that work for me. I would be very grateful for any assistance. I have a JWindow sized to

  • Can I plug in peripherals (scanner, card reader) to my slave monitor?

    can I plug in peripherals (scanner, compact flash card reader) to utilize the firewire ports on the back of my Cinema HD display that I have hooked to the iMac, or do I need to get (another) hub??

  • How to know the last time a table was used?

    I was trying to find a log or something that can tell me when and who was the last one/s that used a table. Could someone help me? thanks