TS3694 Tried to restore my IPOD and keep getting 1604 errors. Any help?

I haven't updated my ipod in 3 years because it was such a pain last time I did it and thankfully it came back. But I foolishly attempted it again and now after it was put in the restore mode and Itunes attemps to restore the device I get an error message with 1604. I have gone through the troubleshooting steps, tried different USB ports and get the same result. Any help?

If as the artical says, uyou tried another computer and another network then make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar          

Similar Messages

  • TS3694 I am trying to restore my iphone and keep getting the error message 3014?

    I am trying to restore my old iphone for my daughter and keep getting error message 3014 - my itunes has the latest version uploaded?

    Have you looked here?

  • My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?

    Hi,
    You could see if this helps...
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    DFU Mode
    Open iTunes and Connect the iPod to your Mac
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
    After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
    The Phone Screen will remain Black... Now Restore.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Can not update or restore my ipod touch, keep getting the error message 13019

    can not update or restore my ipod touch, keep getting the error message 13019

    Start here:
    iTunes: Error 13019 during sync

  • I am trying to download an app and keep getting this error message: "Could not sign in. An unknown error has occurred" keeps popping up.

    This is a question for a mini iPad...
    I am trying to download an app and keep getting this error message: "Could not sign in. An unknown error has occurred.  I have tried shutting down and restarting. I've tried changing the password. I get the error message with free and not free apps. Any suggestions on how to fix?

    Reports are that this is a problem with the iTunes Store that they're working on. Some people have had success after signing out of their account and back in. If that doesn't work for you, wait a few hours or perhaps until tomorrow and by then they may have the problem sorted out.
    Regards.

  • HT1473 Trying to download cd's and keep getting 4010 error.  How do I correct this?

    Trying to download cd's and keep getting 4010 error.  How do I correct this?

    if you have itunes match - dry disabling it - then disable your antivirus and try again - good luck!

  • I keep trying to load firefox 6 and keep getting this error - The requested URL /cse?cx=partner-pub-3540673482024757:xbhdw8hkfz5&ie=ISO-8859-1&q=&sa=Search was not found on this server. That's all we know. in English

    I keep trying to load firefox 6 and keep getting this error - The requested URL /cse?cx=partner-pub-3540673482024757:xbhdw8hkfz5&ie=ISO-8859-1&q=&sa=Search was not found on this server. That’s all we know. in English

    Bookmark and use this;
    Download the '''[https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Mozilla Search Reset]''' {web link}
    This add-on is very simple: on installation, it backs up
    and then resets your search preferences and home page
    to their default values, and then uninstalls itself. This
    affects the search bar, URL bar searches, and the home page.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • HT4061 I just got this iphone 5c i used the Restore from icloud and keep getting an error it doesn't reset the phone tho factory settings what can i do?  I tried to reset it from the computer but it doesn't happen.  And now it shows the itunes icon.

    tryed to restore iphone 5c get an error message theres no info on it anymore and halfway through restore process it gives me an error

    The iCloud backups just dont work for me so I use the computer backup intead and works fine. If you can make a computer backup.

  • Does anyone know how to open an old AppleWorks document: Address DB.cwk is the name of the document. I've tried Pages, iWork applications, Word and keep getting an error message.

    This is an old file saved from a crashed MacBook and we're trying to figure out if we can get the information from the file - a list of contacts and addresses.
    Appreciate any help you can supply.

    As of Lion (10.7) the PowerPC compatibility "Rosetta" utility is no longer supported by Apple.  So PowerPC programs such as AppleWorks no longer work.
    For old software that will run under 10.7, 10.8 and 10.9 and will read some of the AppleWorks formats see:
    https://discussions.apple.com/message/23999077?ac_cid=tw123456#23999077
    and
    https://discussions.apple.com/message/24000557?ac_cid=tw123456#24000557
    If your Mac came with Snow Leopard or and earlier OS you can run Snow Leopard (10.6) on an external drive or on a partition on your internal drive to continue running PowerPC programs under the Rosetta utility.  Using the Startup Manager http://support.apple.com/kb/ht1310 you would boot Snow Leopard to run the PowerPC applications and then reboot a newer OS (10.7, 10.8 or 10.9) to run normally.
    If you have a newer machine or will be using the PowerPC applications often and you want to run them on Snow Leopard at the same time you run a newer operating system, then you can use a virtual machine such as Parallels, VirtualBox, or VMWare Fusion.  You need the Snow Leopard Server version to use it with a virtual machine (VM).  You need to call Apple to order SL Server. 
    Snow Leopard Server for $19.99 + sales tax & shipping costs at 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only). 
    Parallels VM ($80): http://www.parallels.com/products/desktop/
    Virtual Box VM: (free,open source): https://www.virtualbox.org/
    VMware Fusion VM ($39): http://www.vmware.com/products/fusion/
    See Roger Wilmut’s article: Abandoning Appleworks:
    http://www.wilmut.webspace.virginmedia.com/notes/aw/page1.html
    Last call for AppleWorks users:
    http://www.macworld.com/article/1160843/last_appleworks.html

  • IPhone told me I needed to restore and update, also said the phone did not have an IMEI number. I tried to restore from iTunes but keep getting an error message.

    Ok I need help. I went to use my phone, put in my passcode, emergency dial came up, then the phone said I didn't have an imei #. I hit the back button and then I was told I needed to restore and update using iTunes. I tried several times to do this and my phone is still not working. It acts like it's updating, but once the bar reaches the other side of my phone, iTunes tells me there was an error. I used all the ports on my pc, changed cables, restarted my pc, and still nothing. Can anyone please help me. This phone is my life and I can't afford to get another one.

    Sounds like you might need to take it to an Apple Store but if it is an iPhone 3G it would no longer be under warranty.
    Looking at the Apple Store online you can get an iPhone 3GS from $49 on AT&T if it comes to having to get a new one. Your other option is second hand.

  • I am trying to restore an ipod, but keep getting error 3194. Tips?

    Ipod = disabled
    Recieve error 3194
    Windows computer

    See:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    How to Fix iTunes Error 3194?
    How to solve iTunes error 3194 in 10 simple steps

  • I'm trying to update my Itunes and keep getting an error message "The older version of Bonjour cannot be removed. Contact your technical group" What can I do or need to do?

    What I said in the question. I have windows XP

    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
    Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

  • [SOLVED]Trying to install googletalk plugin and keep getting an error!

    Does this every time even after installing the extra repository.
    $ sudo makepkg install --asroot
    ==> Making package: google-talkplugin 3.6.1.0-1 (Sat Sep 22 15:05:08 EDT 2012)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving Sources...
    -> Found google-talkplugin-3.6.1.0-i386.rpm
    ==> Validating source files with sha1sums...
    google-talkplugin-3.6.1.0-i386.rpm ... Passed
    ==> Extracting Sources...
    -> Extracting google-talkplugin-3.6.1.0-i386.rpm with bsdtar
    ==> Removing existing pkg/ directory...
    ==> Starting package()...
    ==> Tidying install...
    -> Purging unwanted files...
    -> Compressing man and info pages...
    -> Stripping unneeded symbols from binaries and libraries...
    ==> Creating package...
    -> Generating .PKGINFO file...
    -> Compressing package...
    /usr/bin/makepkg: line 1230: /etc/makepkg.conf/google-talkplugin-3.6.1.0-1-i686.pkg.tar.xz: Not a directory
    bsdtar: Write error
    Last edited by Invie (2012-09-23 03:56:52)

    Ah, the "extra" repository was this one:
    [archstuff]
    # AUR's most voted packages
    Server = http://archstuff.vs169092.vserver.de/$arch
    -- To pacman.conf.
    I ran it as root because I hadn't exactly read the manual, as well as the fact that it printed a line: "Cannot install file, not enough permissions! Type --asroot to run as root!" or something along these lines.
    $ sed -n 1230,1260p /usr/bin/makepkg
    create_package() {
    if [[ ! -d $pkgdir ]]; then
    error "$(gettext "Missing %s directory.")" "pkg/"
    plain "$(gettext "Aborting...")"
    exit 1 # $E_MISSING_PKGDIR
    fi
    check_package
    cd "$pkgdir"
    msg "$(gettext "Creating package...")"
    local nameofpkg
    if [[ -z $1 ]]; then
    nameofpkg="$pkgname"
    else
    nameofpkg="$1"
    fi
    if [[ $arch = "any" ]]; then
    PKGARCH="any"
    else
    PKGARCH=$CARCH
    fi
    write_pkginfo $nameofpkg > .PKGINFO
    local comp_files=".PKGINFO"
    # check for changelog/install files
    for i in 'changelog/.CHANGELOG' 'install/.INSTALL'; do

  • I am trying to burn a CD and keep getting this error message: Burning disc failed because communication to the disc drive failed. (error code 0x80020022)  Any suggestions??

    Burning disc failed because communication to the disc drive failed. (error code 0x80020022)  Any suggestions??

    Sadly, that error has umpteen causes, sometimes the drive is going out, sometimes it's bad media, sometimes a slower burn works, & rarely a Cleaning Disc helps.
    Bad File names can even cause it...
    http://www.bbqiguana.com/2010/02/macos-x-error-0x80020022-trying-to-burn-dvds/

  • Trying to download lightroom 5 and keep getting an error message

    ERROR: Third party payload installer Install Lightroom 5 CCM.exe failed with exit code: 1603

    check these suggestions even though they are for cs5, http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html

Maybe you are looking for

  • Getting error in while changing sales order which is created using BAPI

    Hi All,    I have created the sales order using BAPI ( BAPI_SALESORDER_CREATEFROMDAT1 ) and i am successfully creating sales order using this BAPI. But while i want to change sales order iam changing Shipping Conditions in Header Data of sales order

  • Microsoft Remote Desktop displaying "Connection Reset by Peer"

    Server Side Configuration: RDS Gateway Server: MS Server 2008 R2 RDS Web Server: MS Server 2012 R2 Standard RDS Server: MS Server 2008 R2 Client Side Configurations: Dell OptiPlex 9020: MS Windows 7 Enterprise with MS RDC [will refer to as DELL] Appl

  • Hp6500A plus. When I scan a document to PDF it is produced as a BMP file.

    My scan settings are correct and have been saving correctly. All of a sudden the scanner starts producing a BMP file instead of a PDF file.  It doesnt matter what i do it will not work correctly.  I have switched off eveything , retstarted , checked

  • I need Flash 10.1 standalone

    I have looked everyplace and I can't find a Standalone EXE or MSI for Adobe Flash 10.1.  Where can I find this?   I have downloaded install_flash_player_ax.exe (56mb) but it does not have the standalone.   For version 10.0 I had this install_flash_pl

  • NotAllowedError

    Hello, I'm using the net.http.request in a javascript file in the javascripts folder of the Acrobat X pro and Acrobat reader but it does not work on reader. On Acrobat X pro there are no problems, how do I manage to make it work on reader? Thank you