TS3694 Tried to update to ios 6 please help
Tried to update to ios 6 and the download got to 99% before error code 3194 displayed and I cannot reload any software now, please help
Goto --
My Computer --> C Drive--> Windows --> System32-->Drivers-->Etc--> Host File
-Cut (remove) this host file and past it on desktop.
-Now comeback to itunes - provided you have fresh itune installation after removing it COMPLETELY from your system (Ref- http://support.apple.com/kb/HT1923?viewlocale=en_US).
-Plug in your iphone to your windows via active USB port (no hub) and with good internet connection.
- Repeat the ios update process and avoid doing multitasking ( I was lil careful... :)).. And that worked for me ...updation took max 10 min's.
- Once the ios updation process is done , follow the instructions and complete the ragistration process. restart your iphone and its on ios 6 EnJOY !
- Put the HOST file back to its original path.
If this resolves your problem , Like it :-)
Similar Messages
-
TS3694 trying to update to ios 7 getting error msg. any suggestions?
trying to update to ios 7, and after partial download getting message "you do not have permission to access the requested resource" any suggestions?
All of Apple's servers...including the activation servers are pretty much flooded with users like you doing the same thing. Be patient and keep at it...or wait till the traffic to them has decreased and then try again. Coming back to it tomorrow (if that's a viable option for you) will likely increase your chances of not having issues.
-
IPhone 5 stuck in recovery mode loop, get error 9 when trying to update to ios 7 help me
so i have tried every way (except a different computer because that option is not available right now). i wanted to reset (factory reset erase all content) my iphone 5 because it was being really wierd. id be using an app all the sudden it would just turn off, try to restart itself, never get past apple logo screen, crash, attempt restart again etc. only when i would hold home and power button it would start up the right way. anyway i went into my iphones settings> general> reset> erase all content and settings. BIG MISTAKE!!!!!!!! ever since then it just have been stuck in recovery mode. the first time i tried to restore it. i got error 3914 i think. doing a little research i found i needed to update itunes so i did (11.1.5.5). then it said i needed to download iOS 7 so i did. and when i try to restore it, i get error 9. itunes is up to date. my windows is up to date. ive tried everything i can think of and im gettin to the point where im gona throe it at the wall
SOMEONE PLEASE HELPMEAnd you have done all include here?
http://support.apple.com/kb/TS3125 -
Hello. I have an iphone 3gs 8gb factory unlocked. Currently its running on ios 5.0.1 and I am trying to update it ios 5.1.1 but its not updating. The itunes downloads the ios 5.1.1and gives back unknown error(3194). Please help.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
hi
i tried to update to ios 8.2 on my iphone 5s when message popup to me now my iphone not working, please help i dont want to lose my dataWhat is the exact text of the message you got? And did you not back up before you updated?
-
I am still trying to update my Ipod touch 4 to the iOS 6 version. It is on the 4.3.5 (8L1) version. When I go to settings-General-it just says About and nothing about an update. I have no idea how to update it! Please help!
You can only update via the ipod with ios 5 or later.
You need to update via itunes on your computer as always. -
I have been trying to update to IOS 6 for 3 days now - my Iphone4S is in middle of restore and it gets so far then stops - no error messages - the bar does not move further. it stops at different places -
can anybody help please
KulbirStewart
This forum is for questions regarding the LabVIEW Datalogging and Supervisory Control Module. You will have more luck posting this question in the general LabVIEW forum.
Good luck -
Today I tried to update to IOS 8 on my ipad 4. I thought I was doing everything right. I did it through itunes. I updated iTunes to 11.4. I backed up before starting. It now is frozen. itunes says it's in recovery mode. The only options it gives me is to Restore so I say ok... after a few seconds I get get error 3014. It says this ipad can not be restored. It has a button to click for more info which leads me to this page: Error 3194, Error 17, or "This device isn't eligible for the requested build"
Please help, I have a back up I just can't get to it. Why did this happen!!!
HELP!I have since tried a few more things... suggestions found online...
I tried using another computer, same house same internet link though... it downloaded the update again, took about an hour & a half but as soon as it finished it said it could not restore because "device could not be found". I unplugged my ipad then plugged it back in so it would "see" it but it just went right back to the "ipad in recovery mode needs to be restored"... then the same error 3014.
I don't know if the computer can sense the ipad or what's going on. On the screen when it wants to do the restore it has an icon of an ipad & it says "Serial Number: n/a
The next thing I tried... was right clicking iTunes & choosing "Run as Administrator". It started another hour & a half download of the update... but then when it was done it went right back to the error 3014.
Is there nothing that can help?!? -
hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphone??or it's just an temporary error in the apple software center???
Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card. -
i'am using iphone 5, i tried to update the ios 8.0.2 using the shift key in itunes update @ windows 8 i have the file which i downloaded, but it says that firmware version is not compatible. what can i do for it . help me friends
Hello vinoth1986,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning update issues:
If you can't update or restore your iPhone, iPad, or iPod touch
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
After trying to update to iOS 7, my iPhone 4 says connect to iTunes, which I've done 4 times. It keeps saying restore and upgrade but won't do it. Help!,,,,
Hi there,
You may find the troubleshooting steps in the article below helpful.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
TS3694 error 3194 trying to update to ios 6
I get error 3194 trying to update to ios 6
I am having the same probelm. I did a quick google seach and it seems that this problem was common to jailbreak devices. I have never JB my device. It is my work iPhone 4S. any help?
-
I have a 3gs, and I haven't updated it for a long time because I always have issues when I do. I tried to update the ios today, and it decided to update it to 6.1.3 instead of 7, I didn't think there would be a problem, so I clicked ok. When I came to check on my phone, itunes said there was an error with the update, and my phone was in recovery mode (plug-in sign on the screen). I looked up multiple things to try, I tried putting it in DFU mode, still itunes doesn't see it. The computer also doesn't list it under devices, however when it is plugged in the Apple Mobile Support USB Driver shows up in device manager. I have tried uninstalling itunes and reinstalling, still nothing. I just want to know if there is anything else I can try. Thanks.
No, it is my phone that I've had since 2009. I just hate updating it because every time I do something goes wrong. So I put it off as long as possible. I am getting a new iphone, but I read that to have your backup transfer to the new phone, it must be a backup from the current ios.
-
Error 3200 while trying to update to iOS 5! Help??
I'm trying to update to iOS 5, and every time it reaches as far as extracting the software and prepping the phone for the update. Then it stops and gives me an error 3200. Any fixes to this?
It worked for me after I disabled the Passcode, turned off WiFi and Cell networks, closed all apps (hit the home button twice and then hold on an app to bring up the close button). After all that power down and power up. Worked for me then.
However it is probably more related to as others have said the sheer volume of hits. -
I had my iphone jailbrake,i tried to update now is dead help please
i had my iphone jailbrake,i tried to update now is dead help please
leanetg37 wrote:
jailbrake,
As in STOPPED working!!
Maybe you are looking for
-
SP2-0027: Input is too long -error on pl/sql procedure
Hi, We are on Oracle 11.2.0.2 on Solaris 10. I have a procedure call that errors out with this error: SP2-0027: Input is too long (> 2499 characters) - line ignored It is one single procedure but it takes too many long inputs in it. This giant proced
-
Hi, I am calling a web service in the web part class file where it gets the data. I need to call the service at regular intervals of time which is in the web part, is there a way to get the web part refreshed automatically at certain intervals of tim
-
Qosmio G50 - Repairing windows from the HDD
Hello all My laptop - QOSMIO G50 - needs a bit of cleaning up and I was thinking of reinstalling from scratch. I know I can use the "repair" function which is "hidden" on the HDD which will reset the pc to it's initial installation. But i still do ha
-
I want to make a song from my itunes library into a tone without paying.
-
How can I find/reactivate a removable drive after I've ejected it?
How can I find/reactivate a removable drive after I've "ejected" it (without simply plugging it back in)?