TS3694 Trying to restore ipod touch.
Have went to youtube to restore settings to a locked IPod touch. Itunes says won't allow because of a secruity issue (3194) Any suggestions of how to restore the ipod touch so that we can use it?
3194
See the actions for that error here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore
Similar Messages
-
Error message 3014 when trying to restore ipod touch
error message 3014 when trying to restore ipod touch, i have tried everything, any suggestions?
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Been trying to restore Ipod touch for days after updating Itunes. Error code #9. Stuck on restore screen. Tried all the solutions posted. Tried on 2 computers, Vista + XP. No device shown on computer. Thanks Apple! Didn't have this problem before update. How about rolling back your update?
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
Getting an error when trying to restore iPod Touch 2g
When I'm trying to restore my iPod touch 2g, I keep getting the following error:
An error occured while restoring this iPod (-402620415).
I called support but my phone support warranty has run out and I don't want to pay $30 to have this problem looked at. The lady on the phone even said she's never heard of this problem before. Does anyone know anything about this?have you seen this support article ?
another one here. -
HT201263 Trying to restore ipod touch because it is disabled.
I have an ipod and can't remember the passcode on it. It is disabled at my many attempts to remember the code. It has been sitting for a few months and the original computer died! I tried to restore it with my current itunes but halfway thorough the process it asks for the passcode. WHAT DO I DO??? THANKS!
Place the iPod in Recovery mode and then restore.
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I was trying to restore ipod touch now it has itune connect symbol and wont connect
I was trying to restore my ipod and something happened now it has come up with itunes connection symbol and wont do anything now
- Let the battery fully drain. After charging for an hur try a reset:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Tehn connect to your computer and restore via iTunes is necessary.
- If you still have the white screen it is time for an appointment at the Genius Bar of an Apple store. -
Hi
My daughter forgot her password after mispla cing her ipod for 3 weeks. I tried to restore after it went into disabled mode. I get an error 3194.
Some help would be appreciated.Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
Trying 2 restore iPod touch but stuck after extraction of latest software
Hello, Im Aliva
im trying to restore my ipod, but its stuck while restoring frozen on ipod and just "waiting for ipod" on itunes, when i connect it to the macbook originally there was nothing from the ipod just dead black but heating up rather very hot, but when i try to put it on restore mode theres no response still in the ipod but it acts as normal in the itunes and when i go through the steps to restore it on itunes, the ipod suddenly turns on while trying to restore, what should i do?Unable to Update or Restore..?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps... -
My daughter recently bought a new iPod Touch. She loaded her music from itunes, but now needs to delete it to let me use it for a while with my music.
She has been unable to do this, and is getting the message:
"This iPod could not be restored. This device isn't eligible for the required build."
Any advice please.
ThanksThis must be a 'sticky' as no one has answered. What puzzles us is that I was able to do this procedure with my iPod Nano 1st gen!!
-
I have tried 3 times to restore my itouch to update to ios 5.0 and now I am getting error message. "ipod could not be restored. an unknown error occurred. error 1611" ?!?! does anyone know how to fix this?? I now have no access to my ipod. it is stuck on screen with itunes icon and plug!
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service. -
Trying to restore ipod touch but keep getting various errors
so alot of my music kept skipping (the song would start and jump around within itself) so i updated the ipod, then had to update itunes, and now my ipod wont turn on so ive tried restoring it but evertime i do i get errors first it was error 6, then 37 and then i updated my version of microsoft windows tried again and then got error 6 again.
anyone know what the go is?
ever apple device ive ever owned has has had problems i dread going to the apple store so hopefully i can fix it without having to do so.
thanksErrors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
HT5654 error 21 when trying to restore ipod touch gen 4 what can i do
I have an ipod gen 4 touch and I need to retore it and I get error 21 what do I do ???
Type error 21 into the Search Window (top right)
-
HT201210 trying to restore ipod and I get an unknown error
Trying to restore ipod touch and I get an unknown error.
What is the complete wording of the error message?
-
HT4113 what does pairing file missing mean and how do i fix it to restore ipod touch
need help restoring ipod touch forgot passcode and tried to restore but message about pairing file missing what does that mean and how do i fix it
Maybe:
A fix for those "Pairing Record Missing" errors | TUAW - The Unofficial Apple Weblog -
I have download and update iPod touch (4th generation) running firmware version 4.2.1 to iOS 5 or later through iTunes 11.1.5.5 so i have tried to restore iPod twice but still showing only USB cable to be connect to iTunes. Nothing is happening. so please tell me how to resolve it.
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...
Also see your other post > After updating iOS iPod is showing only iTunes log with USB Cable..
Maybe you are looking for
-
I have several machines in the office using Time Machine over a network to back up to a partitioned hard drive on our network. The size of the partition for each machines backup is ~3x the size of the data being backed up. Everthing hums along fine
-
Importance of Forecast Delivery Schedules in SD scheduling agreements
Hi ALL, I would just like to consult you a scenario that I'm facing. When I create a JIT scheduling agreement, even though that schedule lines are maintained for the JIT delivery schedule tab, if the Forecast delivery schedule tab has no schedule lin
-
HT1632 Why do I keep getting an error message when trying to sync my workouts?
I haven't been able to sync my workouts for the past few weeks. I have an iPhone4 and have always synced directly from my phone to Nike+. But over the last few weeks, when I try, I get the following error message: "Nike+iPold cannot sync workouts bec
-
Hi Guys, I've been trying to get this working since last week monday but I get the same error everytime I try some other approach. Its a simple Soap -> ECC (sync) -> Proxy interface. If this works I'll add a 2nd interface to the bpm.. Error I get: "T
-
LR 5 issues with catalog on external drive - laptop works fine, iMac does not.
I've just upgraded from LR 2 to LR 5 on my mac laptop and simultaneously gotten an iMac, on which I installed LR 5. I'm trying to work on both, so updated my catalog to a new location on the same external drive as my photos. Everything works fine on