TS3694 What is the error 10009

What is the error 10009 in iphone

What were you doing when you receive that error?
Is error on iPhone?
On computer?

Similar Messages

  • TS3694 What is the error 3194 while restoring your firmware ?

    What is the error 3194 while restoring your firmware ?

    Don't panic and don't worry. Your problem is basic. This error happens when your downgrade or upgrade your iDevice once apple stop signing the firmware.
    DON'T use Tinyumbrella or others jailbreak utilities.
    Steps:
    1. Goto      Windows/System32/Drivers/etc    
    2. Open "Hosts" file with Notepad.
    3. Delete   gs.apple.com (everything - all traces) then save it.
    3A. And also delete the Tinyumbrella notepad file.
    4. Plug-in your iDevice to PC, start iTunes and  Restore.
    All the best!

  • TS3694 what is the error 1015

    when we update iphone one time error 14 and next time 1015
    please assist and what is the problem

    http://support.apple.com/kb/TS3694#error1015

  • TS3694 what is the error code 2003 when trying to restore an ipod touch

    Im trying to restore a first generation ipod touch and it keeps coming up error code 2003.  Ineed help to figure out to get the corrected.

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    http://support.apple.com/kb/TS3694#error2001

  • TS3694 What does the error 3194 mean is wrong with the ipod?

    Our ipod got splashed with water in the bathroom (8 year old brings it everywhere).  Now it doesn't work at all.  Plugged it into the computer and it says detect unknown ipod, in recovery mode - do we want to restore it.  I choose "restore & update" but it gives the error of 3194 and the apple site doesn't say any specifics about this error.  Is our ipod dead????  It is only just over a month old so we have the 1 year warranty.  If my son got it wet, will apple do anything for us.  Even if it isn't covered under the warranty, is it something that can be fixed or do we need to buy a new ipod?????
    Any help in this, otherwise I am about to call the 800 number.  Any insite appreciated.

    See the actions for that error here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    iPhone Error 3194 - How to Fix iTunes Error 3194?
    Fix Error 3194 from iTunes during iPhone restore

  • TS3694 what does the error 1015 mean?

    the error code 1015 appeared when i tried to restore original setting of my 3g i phone. i tune recommended to update software version. when it did so, a message showed that system had to be restored. while restoring, the error appeared on i tune. now, i can't use my phone. i tune was updated as recommended by the site to eleminate one of the factor that might be the cause of the error.
    for those who encountered the same problem, would u plz HELP. thanks in advance.

    Google it and you can find a remedy. Sounds like your iPhone has been jailbroken or hacked, or someone has used TinyUmbrella on your computer.

  • HT1491 Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

    Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

    Hi Velvalee,
    While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
    Cheers!
    - Ari

  • What Speed could i get & what are the errors

    Hi Everyone.
       I have just joined B.T & yesterday was my last day of the 10 day period.
       Bin looking at my speed it hasnt gone up alot but i keep getting all these errors on the hub info so i would like to ask what are the errors please & does the speed look about right for me thanks Nick..
     Short time for connection as B.T reset the Hub its a v3.0a
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    1 days, 06:08:58
    Downstream:
    4.931 Mbps
    Upstream:
    1011 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.3 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    5.5 dB / 5.8 dB
    Line attenuation (Down/Up):
    46.4 dB / 27.7 dB
    Output power (Down/Up):
    18.5 dBm / 12.6 dBm
    FEC Events (Down/Up):
    126408871 / 3607
    CRC Events (Down/Up):
    102820 / 739
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    91458 / 730
    Error Seconds (Local/Remote):
    32083 / 501

    Just enter your down attenuation here- http://www.kitz.co.uk/adsl/max_speed_calc.php  there are things you can do to reduce errors like connecting to the master socket see if there is a difference, checking your wiring and housing of the hub etc. A explanation of errors here-http://www.kitz.co.uk/adsl/linestats_errors.htm
    Mortgage Advisor 2000-2008
    Green Energy Advisor 2008-2010
    Charity Health Care Provider Advisor 2010-
    I'm alright Jack....

  • What does the error "Unable to lock the following files:" mean?

    What does the error "Unable to lock the following files:" mean? After the colon in this error message, a path to the .icml file is listed. We are using InDesign CS6 with InCopy CS6 (Mac), assignment-based workflow, on a shared server.
    Thanks,
    Gita M

    Sounds like a permissions issue on that server.
    Bob

  • HT2433 what does the error message that says " You are logged out because another computer is using this IP address." mean?

    what does the error message that says " You are logged out because another computer is using this IP address." mean?

    Some other piece of network ghardware on your home LAN (Local Area Network) is using the IP address your Mac is trying to use.
    Reboot both your modem and router, or the Modem/Router combo box you have, and all pieces of networking equipment, computers and printers, you have connected to your LAN.
    If you continue to get that error then it is a bug in OS X or you have your Mac set to a Static IP address that is being handed out by the routers DHCP server to some other device.

  • What is the error code mean? And how to solve it ?Please give your answer. Thanks

    What is the error code  mean? And how to solve it ？Please give your answer. Thanks
    Attachments:
    QQ截图20140403134626.png ‏59 KB

    duplicate post
    LabVIEW Champion . Do more with less code and in less time .

  • What is the error code -5010D

    what is the error code -5010D

    A little Googling seems to indicate a hard drive problem, which sounds right given the symptoms you're seeing. Make sure you've gotten a good backup of everything. The good news is hard drives are cheap and easy to install. You can look up the procedure for your machine at ifixit.com.

  • What is the error code:0x80020042?

    what is the error code:0x80020042?

    This Discussion may be able to offer some enlightenment...
    https://discussions.apple.com/message/11655160#11655160

  • Do you know what means the error -17502

    Do you know what means the error -17502

    Hi Victor,
    What is the version of teststand you're using? How did you first encounter this error? I am trying to replicating this error on my side and would like to know when does this error occur?
    Sometimes it is a possiblity that one of your registry keys located at HKEY_CURRENT_USER»SOFTWARE»NATIONAL INSTRUMENTS »TESTSTAND might have been corrupted. So deleting this folder should help getting rid of the error.
    But since this is an issue, could you post your exported registry keys, so that we can investigate a little further into the issue. To export the registry key entry, right click on TestStand at ( HKEY_CURRENT_USER»SOFTWARE»NATIONAL INSTRUMENTS »TESTSTAND) and select export. Please attach this file here so that we could further take a look at it.
    I hope to hear back from you soon.
    SijinK
    National Instruments.Message Edited by Support on 07-08-2005 11:47 AM

  • What will the error in calltransactionprogram in dat upload?

    hi all
    what will the error in calltransaction program in dat upload, when that flat file field are not match with the ,internel table fields. what are the common errors occured errors while data uploading by using  calltransaction methodfor a transaction.

    if you declare internal table as like quantity field then you will get short dump so you have declare internal table field as like char type.
    and if you mentioned wrong field name with respect screen field then you get valid error message state that
    field name is not input field.
    Thanks
    Seshu

Maybe you are looking for

  • MS access,servlets and jdbc-odbc

    when i try to connect to ms access database using servlet i get unable to open registry key DriverId problem. servlet successfully extracts the form data.Even jdbc code alone works fine, but when jdbc code is embeded in servlet I get the above error.

  • Iphone 3G - Connecting and syncing with computer

    I am very non-technical and have just purchased a 3G. After spending a good bit of time with Apple support, it appears the my version of Outlook (2002) , makes it difficult for the Iphone to function with my primary comouter as it should. Has anyone

  • Issue in table control

    Hi All I have a table control in which there are three columns. I need a dropdown list box in one of the columns but the problem is i dont want dropdown in all the cells of that column.            col 1     col2        col3 row1 row2 row3            

  • IPad Air mini won't charge

    I have been travelling for a month charging my iPad mini, ipad, and iPhone 5 with the same charger and cord. Now my iPad mini is dead and won't charge. Help!

  • Phone number validation hint after blur

    Every time I use phone validation and add a hint like (555) 555-5555 if the user does not enter a number and they leave the field, the field leaves ( symbol in the field.  Is there a way to clear the ( symbol and replace the hint if the user did not