TS3718 Facetime:  I can hear the caller but not see them.  They can hear and see me.  What could be the problem.  I am using an I-Pad 2 updated with OS7.

When receiving a Facetime call, I can hear the caller but can not see them.  They can hear and see me. 

Unfortunately, the drive is pretty much restricted without hacking it. That is, you can't stream its content via standardized protocols like UPnP, SMB, FTP and the like. This makes you won't be able to access its content from any third-party apps otherwise capable of playing back AVI files from UPnP / SMB / FTP / WebDAV etc. sources.
While this is certainly not a recommendation (I can in no way be held responsible if anything goes wrong): you may want to consider extending the capabilities of the drive by installing the hack: http://www.hackseagatesatellite.com/wordpress/welcome/
It'll "open" the drive for third-party, AVI-capable multimedia apps like GoodPlayer, It's Playing etc. to directly play the files over the network.

Similar Messages

  • My Verizon iPhone FaceTime will let me answer calls but not make them??

    Whenever someone is calling me on FaceTime it lets me answer but when I try to call people on FaceTime it just says Facetime...

    Why are you still using iOS 4.2.7 - 3 versions behind 4.2.10?

  • Microsoft lync client can make calls but not receive them

     
    So I have our Lync server all set up…I can make outgoing calls, but I cannot receive them on my client. I have the URI fully populated with my direct line. Why can’t I receive calls?  I have this integrated with my call manager as well.

    Hi,
    1. Please try to check mediation server listening ports.
    2. Please also make sure do populate the telephone number field in AD user’s account. Please refer to the following link to verify if LineURI is set correctly.
    http://www.lynclog.com/2011/05/enterprise-voice-lync-2010-one-of-many.html
    3. Would you please check your configuration of CUCM routing? Here is the information about
    configuring Cisco Unified Communications Manager 7.1:
    http://blogs.technet.com/b/drrez/archive/2010/10/12/direct-sip-cisco-unified-communications-manager-7-1.aspx
    Another more information just for your reference:
    http://blog.unplugthepbx.com/2011/03/16/integrating-microsoft-lync-and-cisco-unified-communication-manager-part-3-configuring-cucm-to-route-calls-to-lync/
    Regards,
    Kent

  • I can receive face time calls but not make them

    Why can I receive face time calls but cannot make one to a contact?

    Have you tried looking in settings, general, restrictions and see if the app got restricted? When it's restricted the icon vanishes.

  • Hi all, uc560 make calls but not receive them

    I have a UC560 with VoipSwitch siptrunk logged in, I can make calls but I can not receive.
    server inherits another provider, I can not access it by CCA, the system logs on but the device appears with authentication failure.
    I can only access via telnet or hyperterminal.
    I am no expert only ccna. would appreciate your help, thanks.

    Hi Welington,
    If you are not familiar with CLI it may be best to rebuild the device via CCA so you can manage it.  Otherwise, you will not be able to receive Cisco Support either.
    If you don't want to rebuild with CCA though, I would start with getting the following debugs:
    debug voice ccapi inout
    debug ccsip mess
    Let me know if you have any questions.  Have a wonderful day!
    -Trent Good
    ** Please rate useful posts! **

  • My iphone 4s will not sync music with my pc, i don't no if the problem is itunes or mi iphone, both are update with the recently software, please help

    Hi. mi iphone does not sync my music in my pc, i don't now why, this came since a week ago, my itunes is the 11.1.3.8 y my software in my iphone 4s is de ios 7.0.3. i need to know if I only have the problem or is something wrong whit apple

    Hi Samuel6495,
    Thanks for visiting Apple Support Communities.
    If your music does not sync after updating your software, first retart your iPhone if you haven't already:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Next, try setting up syncing in iTunes again by following the steps in the article below. If you're syncing music, try un-checking and then re-checking the "Sync music" checkbox in iTunes.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Cheers,
    Jeremy

  • I can make calls but not receive them on lync 2013

    For some reason I can not receive calls from anybody in Conference mode or PC to PC  in some users. What type of logs can I enable on lync to verify this? I tried disabling an re-enabling again the user on lync and some users seem to work this, but
    in others not. 
    Thanks for your help.

    If you have deployed the Lync Monitoring Server you can look at the CDR and QOE data for calls: http://www.microsoft.com/en-ca/download/details.aspx?id=890 If you haven't
    deployed the Monitoring server, it's recommended when doing voice: http://technet.microsoft.com/en-us/library/gg398199(v=ocs.14).aspx
    You can also use snooper to trace calls (4 part blog explaining): http://blogs.technet.com/b/nexthop/archive/2012/04/16/troubleshooting-lync-server-2010-with-snooper-part-1.aspx
    Please mark posts as answers/helpful if it answers your question.
    Blog
    Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

  • TS3899 When at home using our home wireless I can send and receive emails on my iPad no problem.  When using other wireless networks I can send emails to people who share the same Internet provider but not others.  Why?

    Is the wireless provider the issue?  I can receive emails everywhere I go but in some locations can only send to a limited number of email addresses.

    Greetings
    I suspect that the issue is the SMTP server settings. On your home network you are using your providers SMTP server and all is fine (If you check your email account configs you will find that the SMTP server is set to your providers?).
    When you use a different network (provider) mail will not be sent unless you use that networks (providers) SMTP server (this is a security issue to address ways of "spamming").
    So if youre 3G/4G provider is the same as you home provider all will work well via your home WiFi. If you turn off WiFi and just use your 3G/4G connection to send mail (iPhone/iPad etc) all will work well (when you are out and about and using anothers WiFi network).
    If you are connected to, say a MacDonalds WiFi, mail will probably not be sent. (It will be received though).
    Using WEB mail interface (via your WEB browser) removes this problem as well. 
    (A SMTP server is what is used to send email. So to successfully use anothers (not a networks the same as your providers) WiFi network and send email via it, you must know the SMTP servers name and reconfigure your email account/s to use that server to send mail.)

  • Why are my Macbook Pro and my iPad able to place calls, but not receive them?

    I have a MacBook Pro late 2013 edition and last year's iPad Air as well as the iPhone 5s.  I have all of my devices completely signed in to my iCloud account and all of the appropriate boxes checked.  I can place calls using my iPad and my computer, but when my phone rings, it doesn't ring on either the iPad or my computer.  Strangely enough, my iPad used to receive phone calls a month ago, before most of this all came into play, but as already stated, it now does not.  All of my devices are updated to the latest software and I can seamlessly utilize all other handoff features between all three devices. 
    Any help or advice is greatly appreciated!

    Hi, MrsRhiMac.  
    Thank you for visiting Apple Support Communities.  
    Here is an article that I would recommend taking a look at when experiencing this issue.  
    Get help using Continuity with iOS 8 and OS X Yosemite
    http://support.apple.com/kb/TS5458
    Cheers, 
    Jason H.

  • I updated my iPhone 4 to iOS 6 an I can connect to wifi and it will work for a short period of time until it stops loading big pages such as wifi or safari but it can send and deliver iMessages what should I do? I'm using up a lot of data now lol

    .

    I couldn't find the edit button on my original post so I am posting an update here.
    I have gone through more apps and have had good luck on all but one more.  And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should.  On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much.  I will post a note in the app store to let them know.  I really like the Yahoo app better than the new stock app.
    I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine. 
    Starbucks app works as it should. 
    I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

  • TS3367 I have a iphone 5 ...when I face time someone with a iphone 4s....I can see them and hear them but they can not see me. They can hear me but not see me.

    I have a iphone 5 ...when I face time someone with a iphone 4s....I can see them and hear them but they can not see me. They can hear me but not see me. what is the problem....

    diesel vdub wrote:
    Was the device actually unlocked by Verizon?
    Just FYI, diesel, per an agreement between Verizon and the FCC which allowed Verizon to buy additional spectrum, all Verizon-model iPhone 5, 5C and 5S models are already unlocked.
    Regards.

  • HT201328 iPhone 4 able to receive calls but not make calls

    Hey,
    I received a carrier unlock through AT&T. I restored my phone in itunes and received the "congratulation your iphone is now unlocked" message. I am currently living in Belgium and using the Mobistar network. I have bought several sim cards, and none of the sim cards will activate. I can receive calls but not place them. According to the mobostar representative, this is not even possible. I have restored the phone several times using different sim cards.
    Is there potentially a problem with the phone itself? Everything is showing as if it should work, but I am unable to fix the problem - as well as the service provider here cannot.
    -Al

    Have you tried these two:
    Toggle Airplane mode on and off. Wait five seconds between the on and off modes.
    Reset Network Settings. Tap Settings > General > Reset > Reset Network Settings.

  • HT4245 facetime for mac I can hear caller but my mike is locked on mute and grayed out

    facetime for mac I can hear caller but my mike is locked on mute and grayed out.  I am on mountain lion 10.8

    Double-click the Home button to display recently used apps.
    Flick from left to right along the bottom of the screen.
    Tap the Mute button on the bottom left of the screen.
    A slash will appear across the Mute button:

  • Can anyone help with facetime? im getting missed calls but it doesnt actually tell me i have an incoming call....and the person im trying to contact gets exactly the same.....just missed calls?

    can anyone help with facetime? im getting missed calls but it doesnt actually come up with an incoming call.....the person im trying to contact just gets missed calls also?

    I've noticed that once you miss a call on FaceTime on a desktop Mac, it won't work properly again until you restart the machine.
    I sent in Feedback so we'll see how that goes.

  • My movies and music videos won't show up on screen, I can hear the sound but not see the video how do I fix this?

    My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.

    Hi @anthony7722 ,
    Thank you for your query, I will do my best to help!
    I grasp that you uninstalled the Intel graphic driver and the catalyst control.  You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
    When I checked the specifications for your notebook I see that you have switchable graphics.
    Here are two links that I believe will help.
    Overview of Switchable Graphics or Dual GPUs
    Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
    Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
    Please try this process.
    1. Download the chipset driver, and both graphic drivers and save them  but do not install them yet
    2, Delete the chipset driver and install the updated one.
    3. restart your notebook
    4.Delete the Intel driver and install the updated one
    5. restart your notebook
    6. Delete the AMD driver and install the updated driver. 
    You should now have a Catalyst Control Center.
    This should now allow you to use the higher graphic card which should support the higher resolution.
    I hope this helped.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for

  • Any way to get frame accurate in icon view mode?

    Does anyone know if there is a way set frame accurate in points in icon view mode?  I know that if you are "hover scrubbing" a clip, and then click on it you can use the JKL keys to shuttle through the footage.  But is there any way to go frame-by-fr

  • Reporting from more than one infocube and also from multiple ODS

    Hi all,         Someone please help me in these issues. How can we do reporting from more than one cube ( if data in all the cubes are required, but only a few fields from each cube). And how to do the same with more than one ODS. Thanks in advance,

  • Error - Creation of Billing Document - Item is not relevant for billing

    Hi While trying to Create a Billing document after entering the Order No.the following error msg shown in the Tool Bar No Billing Documents were generated. See log The Error Log shows the following msg with Yellow coloured indication : 000000xxxxxx 0

  • Flash Video Attached on my website won't play continously..

    I made a websitehttp://www.auditiononlinedl.0lx.net the problem is... I attach a .flv file on the homepage... and it was set to auto-play... but when i finish uploading the site... and view my site on a browser... the video plays a little about 1 sec

  • ADF: How to highlight cell(s) in chooseDate component

    Hi, I am using "ADF: ChooseDate" component for my application. Based on certain condition(s), I want to highlight a Date/Cell in the chooseDate calendar. I also want to customize the color for certain date (based on some conditions). I could not find