TS3798 I have a new Ipad, it says I am connected to the internet but will not load . When attempting to go to a web sight, the green bar goes 1/2 inch then nothing
I have a new ipad, it says I am connected to the internet but will not work. When I attempt to go to a web sight the green bar moves 1/2 inch and nothing.
I have a used linksys router that I got from work. I tried connecting with a older ipad and every thing works correctly. any ideas?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Similar Messages
-
My phone says i am hooked up to wireless. but will not load anything.
Do you have a seperate AP providing your wireless or are you using the wireless built into the AT&T router? If seperate, you will need to re-configure the AP to the new equipment AT&T sent you.
Got a new modem today and now my phones will not load anything. Says i am hooked up to wireless. But cant load games,Facebook and well everything.please help.
-
It says I am connect to wireless internet, but can not open any pages or email.
I've tried restarting, I've checked my wireless on/off switch on side of laptop. I've checked to be sure I'm not working "off line". I've tried re-entering my "key". Nothing seems to work!
Joni [email protected]Ok, thanks!
... and how are you connected to the Internet? Wireless DSL/Cable modem/router? If so, what is the make/model of this modem/router?
Let's also double-check your MacBook's AirPort settings ...
System Preferences > Network > Show > Network Port Configurations
o Verify that an AirPort option exists. If it does not, click "New" to create one. (Note: If you are unable to create an AirPort configuration, the AirPort card in your computer either doesn't exist or it is not recognized.)
o Verify that AirPort is "On" (checked)
o Verify that AirPort is at the top of the list. If it isn't, you can drag it to the top.
Systems Preferences > Network > Show > AirPort
AirPort tab
o By default, join: Automatic
TCP/IP tab
o Configure IPv4: Using DHCP
o Configure IPv6: Off
Proxies tab
o Configure Proxies: Manually
o Select a proxy server to configure: <All proxies should be unchecked unless you specifically require a proxy for Internet access.>
o Exclude simple hostnames (unchecked)
o Bypass proxy settings for these Hosts & Domains: <leave blank>
o Use Passive FTP Mode (PASV) (checked)
Do these settings match yours? -
Please help.
Hello Courtney,
Thank you for the details of the issue you are experiencing when syncing your music to your iPhone. It sounds like iTunes is not able to locate the original file for the song to transfer it to your device. I recommend reviewing the following articles to locate you music files on your computer:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/ts1408
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Ever since I downloaded the new Firefox, when I right-click on a link to open it in a different tab, the tab will open but will not load anything, no matter what link I try. The tab will show the website destination in the navigation bar, but will not automatically load it; I have to press the load button in the navigation bar instead of it instantly loading.
== This happened ==
Every time Firefox opened
== The newest version, 3.6.6, of Firefox was downloadedIt's not specific sites. I can middle-click on the same link 50 times and it will open it in a new tab 45 times and 5 of those times, it will randomly open it in an entirely new window. I don't know what's causing this.
It happens so randomly that I don't know how to pin-point what it could be. -
i have a lot of music on my mac ,which then cynced to the cloud ,but will not download to my new iPhone
Welcome to the Apple Community.
Are you using iTunes in the cloud or iTunes Match. -
My iPad is suddenly not loading any apps. When I click on an app, the screen flickers to black and then back to normal, but will not load the app. This is ALL the apps, not just one. Have tried rebooting, to no avail.
Was a Restore one of the things tried.? [Attach the iPad to your computer and in iTunes click on your device. On the Summary page click on Restore and go through the process. Be sure to click YES to Restore from a previous backup.]
-
I have recently started downloading video files. I
have downloaded a season of a tv show. The season had
9 episodes. Three downloaded fine and the other 6
will not. When i try to download them i get a message
saying error
-34 The disk you are attempting to use is full.
Remove files and empty recycle bin to create space. I
dont understand why it keeps doing this. I have lots
of space on itunes and my computer is not full
either.What can i do? How can i prevent this? Is
there a problem with my computer? Thank you!have a look at this support article.
-
My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?
Try this:
1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo. -
My iPad is frozen with a message on the screen that says "iCloud backup is full" and it gives me the option of cancel or settings but will not go to either one or allow me to exit the message. How can I restart? It will not let me turn off or doesn't help to plug into computer
Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.
Data will not be affected. -
I installed a new wireless router on Tues. (May4) up until that time I had no problems using Firefox. Now I cannot get it to open on one computer, and the other it will open but will not load. Wondering if it has anything to do with the router, my provider or our computers. Again, it had been working fine. I am also unable to open interent explorer now on either computer.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; AOL 9.0; Windows NT 5.1; GTB6.4; AskTB5.6)Sounds like a problem with the router installation/configuration (likely) or a DOA router (very unlikely).
Visit the forums for the router manufacturer (i.e., linksys, d-link, etc.) and ask for assistance there. There is probably a link to help listed in the router manual. -
Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men
-
Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server. I have to click the link several time before it will load and sometimes when they do load it does not show the page right. It is like the HTML is messed up or something. I have tried everything I can think of. I started in safe mode, still did it., I removed add-ons, still did it., I reset Firefox and still did it., I completely uninstalled Firefox and re-installed Firefox and it still does it. I have tried Malware Bytes Anti-Malware scans and Avast boot-time scans and found no malware or viruses. I have found that those websites open the first time with no problems on my IE9 and they used to do so in Firefox 26.0. I'm at my wit's end. The website links are in my bookmarks and are used all the time so they are trusted and my avast is set to allow them. They range from news websites to gun websites and everything I have read says that Mozilla does not filter those unless something has changed recently.
Try this as a first step;<BR><BR>
Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''<BR><BR>
and<BR><BR>
Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"'''''<BR><BR>
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
While you are in safe mode;
'''''Firefox Options > Advanced > General'''''. Look for and turn off '''Use Hardware Acceleration'''. -
I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.
Are there any previous networks that you have used that have the same password as Molly? YES
Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
Delete any other networks that you no longer need so that your Mac will search for networks more quickly
Click OK, then click Apply
Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
Then look for any old networks that might have used the name Molly in the past and do the same for them.
Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
and then click KeyChain First Aid
Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
Quit Keychain Access
Power down the entire network...all devices...order is not important
Power up the modem first, then your main router, the other devices one at a time
Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system. -
downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?
Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.
Maybe you are looking for
-
MS SQL Server/VB6 to Oracle 8i using OBDC
OMW, I presently connect to MS SQL in Visual Basic 6.0 using ODBC. I would like to connect to Oracle in the same manner. Does the OMW do this, and if so are there any things I should know before attempting to use it in this application? I have purcha
-
Can anyone identify this part?
Very early on after getting my Mac I noticed a creaking noise, it didn't bother me and thought nothing of it. A couple of months ago I decided to clean it out as it was getting rather sluggish and to be honest that with a declutter, I have seen an im
-
Document Printing - AR Deliveries
Hi, In Sales A/R -> Document Printing. Upon filtering the wanted document and in the list of documents to be printed, is there a way to add additional column(s) in the list (eg. BP Name)? If standard B1 is unable to add additional column(s) to the li
-
I want to restrict instantiation of a class to one time only.
I am developing a java application. The requirement is that only one instance of a class/application should run. Any attempt to load application twice be restricted displaying some warning message. Please help me on this problem.
-
Privileges to view another schema
Hi there, I am sorry if this topic has been covered in another thread, but cannot seem to find it. I have a workspace called DAVE with some objects in it. I also have another schema MERCURY that I would like to use in the DAVE APEX workspace. I have