TS3824 2011 mac mini won't go past white screen with apple logo

My Mac mini won't move past a white screen with apple logo in the center. What should I do?

Hi ..
If you have v10.7 Lion installed, use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
If you are running a prior Mac OS X, boot from your install disc, run Disk Utility. The startup disk may need repairing > Using Disk Utility to verify or repair disks
And try Resetting your Mac's PRAM and NVRAM

Similar Messages

System Won't Boot Past White Screen With Apple Logo

I have a Power Mac G5 tower that someone gave me. No hard drive.
I placed a NEW hard drive in and installed 10.4 onto it. When I finished I turned OFF the machine. When I now try and turn the machine ON, it will freeze-up during boot up at the white screen with the Apple logo. The little spinning ring/dial doesn't come up.
The system is:
Power Mac G5 (June 2004)
Model ID: PowerMac7,3
dual 2.5GHz
512MB RAM (2x256MB)
Using the Boot-up in Detailed SAFE Mode I was given the info below. Any help is greatly appreciated.
using 1310 buffer headers and 1310 cluster IO buffer headers
kld(): Undefined symbols:
ZN11IOPCIBridge18compareAddressCellEmPmS0
kldload_frommemory() failed for module com.apple.driver.AppleMacRiscPCI
Failed to load extension com.apple.driver.AppleMacRiscPCI.
Couldn't alloc class "AppleMacRiscPCI"
kld(): Underfined Symbols:
ZN11IOPCIBridge18compareAddressCellEmPmS0
kldload_frommemory() failed for module com.apple.driver.AppleMacRiscPCI
Failed to laod extension com.apple.driver.AppleMacRiscPCI.
Couldn't alloc class "AppleMacRiscAGP"
kld(): Undefined symbols:
ZN11IOPCIBridge18compareAddressCellEmPmS0
kldload_frommemory() failed for module com.apple.driver.AppleMacRiscPCI
Failed to load extension com.apple.driver.AppleMacRiscPCI.
Couldn't alloc class "AppleMacRiscHT"
kld(): Undefined symbols:
ZN11IOPCIBridge18compareAddressCellEmPmS0
kldload_frommemory() failed for module com.apple.driver.AppleMacRiscPCI
Failed to load extension com.apple.driver.AppleMacRiscPCI.
Couldn't alloc class "AppleMacRiscDART"
ApplePlatformExpert::getGMTTimeOfDay can not provide time of day RTC did not show up

Does it boot into any of these modes?
Target mode...
http://support.apple.com/kb/HT1661
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
We might get clues with verbose mode...
http://support.apple.com/kb/HT1492

After running mac tuneup got a red dot on the hard drive icon, nothing would respond, now on restart cant get past white screen with apple logo, mac tune up disk still in laptop

after running mac tuneup got a red dot on the hard drive icon, nothing would respond, now on restart cant get past white screen with apple logo, mac tune up disk still in laptop

Restart your MBP holding the trackpad down and hopefully the disk will be ejected. Then try to return it and get a refund or put it in the trash. There is nothing that software does for your MBP that you cannot do yourself or with free software.
If can get your MBP started, delete all traces of the offending software. Worst case is that you may have to erase the HDD and reload the OS and your user data. I trust that you have a backup (minus MacTuneUp).
Courcoul has given you his opinion in a very succinct manner, and as you might surmise, I agree with him.
Ciao.

Won't turn on white screen with apple logo and spinning disc

Mac book air won't boot up just has a white screen with apple logo and spinning disc have tried all the startup multiple key pushes , I think

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Powerbook won;t go past grey screen with apple logo on start up

Hi
I am getting very stressed, my powerbook g4 won;t go past the grey screen with the apple logo when switched on. I need to sort it ideally without another computer to go through but if that is necessary then I will do it. I have tried the RAM reboot but nothing, there is not even the spinning loading symbol just a grey screen - which it will stay on until I turn it off. Someone please help!!!!!!!!!!!!! Not sure of my OS as I can't turn my comp on, but I am running leopard on it

Welcome!
First, see if you can boot in Safe Mode, holding the Shift key during startup until you see a message about safe mode. Getting a desktop can take longer because Safe Mode forced some disk checking.s
...I am running leopard on it
Then you should have the install disks. They can be used to boot the computer for repair. Insert the DVD and press and hold the "c" key during startup. That will launch the installer BUT you don't want to reinstall yet. Find the install's Utilities menu and launch Disk Utility. From there you can check the hard drive and make some repairs.
I need to sort it ideally without another computer to go through but if that is necessary then I will do it
That would require that your compute work enough to start in FireWire Target Disk Mode. FWTDM lets your hard drive show up on another Mac as if it were an external drive. You can test by starting the computer and holding the "t" key until you get a blue screen with a big yellow FireWire symbol. Looks like this:
!http://t3.gstatic.com/images?q=tbn:ANd9GcT8uGcDJDrUrECaelR5ash9yA3zuGBakhxrJ9TjfjO_uoCmKQ&t=1&usg=_5RiQv2QkO7UuPLUpiige1MVxdb0=!
I believe FWTDM's code is in firmware and not on the hard drive , so may let yo uaccess the disk form another computer.

Macbook Pro won't boot past grey screen with Apple logo and then shuts off

This is a long story...
This morning, I would turn it on and it'd go to the grey screen with the Apple logo for a few seconds and then go to the icon that is a circle with a line through it. After reading online, I was able to boot it up in Safe Mode. I messed around a little bit in system preferences thinking I could fix it on my own, not really knowing what I was doing (I'm a *******). I went to Startup Disk in Preferences. I chose the MAC OS X, xxxx and then clicked the lock to prevent further changes and then clicked restart.
Now when I turn on the macbook, it goes to the grey screen with the Apple logo for at least two-three minutes and then just shuts off. Won't boot into Safe Mode now. Please help. I already tried the Command-Option-P-R keys trick like five times.

If you have a full retail DVD for 10.6 you can boot from that by holding the C key during startup...but you will then be in install mode if that is what you want to do. At least go ahead and see if it will boot ok from the 10.6 disk and then you can decide what you want to do further.
Apple does not have 10.5 for sale anymore from what some other users have said on here so if you want to go that route you will have to find a copy for sale such as from eBay or one of the Mac resellers.
Before taking the machine to someone, try booting from 10.6 and see if that works...that way you can narrow down problems the machine may be having.

Computer won't load past grey screen with Apple logo, even with OS Disc

I turn on my computer and only gets to the grey screen with the Apple logo and idling circle. After a while, it loads a small box telling me to restart, time and time again, no matter how many times I restart. I've tried holding "shift" to go into safe mode, it won't let me.
I believe it's originally a Tiger platform, and right now I think it's running on Leopard.
I just bought a Snow Leopard OS X Disc, and I inserted it and tried to let it load. It gave me the restart box. I held down "c" while starting up, got the restart box.
Held down "option", and selected the "Mac OS X install Disc"; it went back to the grey Apple logo screen to load, and gave me the restart box after several minutes. Repeated that and held down "c" while loading, still gave me the box.
Nothing I do with or without the OS X Disc is making a difference. I cannot load anything on my computer, period.
Can someone please suggest something for me to try?

Well if you do then turn both computers off. Connect a Firewire cable between them. Boot your computer into Target Disk Mode. After the TDM screen appears boot the other computer normally. If your drive is accessible it will show up as a disk icon on the Desktop of the other Mac. You can then access your files and transfer them to another hard drive.
Then open Disk Utility. Your drive should appear in the sidebar list. Select the drive entry (mfgr.'s ID and drive size) then click on the Partition tab in the DU main window. Set the Partition Scheme drop down menu to one. Set the Format type drop down menu to Mac OS Extended, Journaled, then click on the Partition button and wait for the process to complete.
Your drive should now be OK assuming it's not mechanically damaged. Eject the drive from the Desktop as you would eject any removable drive and disconnect the Firewire cable. Shutdown your computer. You can now boot from the installer disc and install OS X.

Macbook won't boot past grey screen with Apple logo and spinning wheel.

For some reason, after about 1 year and 10 months of owning my Macbook, it decided this morning not to load past the grey screen with the Apple logo and spinning cog/wheel.
I used it for a couple of hours beforehand, and it was working fine. Software Update prompted me of about about 4 or 5 updates; I can't remember exactly what was downloaded, but I think there was a Security Update and iTunes among them. I restarted, left it to install with no errors, but when I logged in, Safari and iTunes were running incredibly slowly. I also noticed that the volume keys weren't responding, as well as the power key to bring up the "Sleep, Restart, Shutdown, etc" dialog box. I forced shutdown, hoping a restart would solve my problem, and that's when my troubles started. I originally just left it, but after about an hour the wretched thing was still spinning.
So far, I have done a number of troubleshooting tips on a variety of websites. I have tried taking the battery out and holding down power for 5 seconds, resetting the PRAM with option, cmd, p & r, and holding down power until the sleep light flashes rapidly and the computer lets out a large "BOOOP".
I have booted off my Leopard install disk with both option and c, repaired the hard drive a number of times, with there being no errors whatsoever. I have tried repairing permissions, but everything seems to freeze up, except the mouse.
For some reason my computer will not boot into safe mode, either, and holding cmd & s at startup doesn't get me to the stage where I can enter commands with the keyboard.
Unfortunately, because of my puny 60GB hard drive, I only have 1GB of free space left and cannot reinstall Leopard without wiping my hard drive.
I would greatly appreciate it if anyone could assist me with this unfortunate dilemma. It's such a shame that my computer has been fantastic for so long and now decides to play up. (Maybe it's just Apple trying to get me to buy a new 2.4Ghz aluminium Macbook sooner than I was planning...)
Thanks very much.

Hi ds,
Sorry to hear you're having such trouble!
Unfortunately, the best thing you can do at this point is reinstall Leopard (and then attempt to install the combo updater, too). If you don't have a backup of your machine, you could boot it into Target Disk Mode (by holding down T at startup) and then attach it via FireWire to another computer to salvage your files.
I recently had to repair a machine with this exact same problem, and after messing around with that for several hours, I'd have to say that I think that an Erase and Install is the way to go. If you then migrate over your user data and start having troubles, you at least know where the problem lies. I suspect, though, that having a clean machine with all of the new updates applied will be the end of the issue.
Sorry to be the bearer of bad news. There are a few other things you could try first; you could, for example, manually download the relevant combo updater from Apple's website and attempt to install it to your damaged machine while it's in Target Disk Mode. If you have a copy of Disk Warrior, that too is certainly worth a shot (and in some cases may be the saving grace). In my experience, though, a failure of this magnitude isn't easy to resolve.
Hope that helps.
—Hazy

Mac book pro is unable to display desktop ,only white screen with apple logo is appearing

Hi
I have a Mac book pro, since today morning the Mac book pro is not starting. It just displays the white screen with Apple logo and search signal. Despite waiting for a long time desktop is not coming up.
I have tried to restart it several time but the status remains same. Kindly help.
Thank you
Kind regards
satish

Gray, Blue or White screen at boot, w/spinner/progress bar

When i start my mac and i got white screen with apple logo

when i start my mac and i got white screen with apple logo n spening round n round

Try here
https://discussions.apple.com/thread/4917686?start=0&tstart=0

Ipad mini stuck on white screen with apple logo

I have a new iPad mini. only had it 2 weeks. used it this morning everything was fine. pluged in to charge, when I came back it is stuck on white screen with apple logo. I tried to reboot. that did not work. please help.

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

Mac stuck on white screen with apple logo at startup

It's a few days i have this issue.
When i turn on my macmini (late 2009) it does the startup sound, but when the white screen with apple logo appears it stucks on that screen.
To solve this problem i have to unplug the power connector, when i restart it works normally.
This happens randomly, not at every startup.
I switched from normal HD to ssd HD (brand new one), i have the same problem with both HDs.
Since black outs are not good for computers i woult solve this problem.
Does anybody have my same issue or know what's wrong?
Thanks!!!

Hello, tough to tell what it might br.
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

White screen with apple logo and rotating pin wheel. Carried to Peach Mac store and it worked perfect. Now it is doing it again.

White screen with Apple logo and rotating pin wheel. Carried unit to Peach Mac and it worked perfect there. Justed started doing this again. Any help?

Have a look at > Mac OS X: Gray screen appears during startup

IBook G4 won't boot past white screen gray apple.

I'm having problems with my iBook G4 booting up. It won't get past the white screen with gray Apple and clock thing turning. I successfully hooked the iBook to my G4 tower via firewire and can get files off of it as well as run a series of TechTool Pro tests and repair procedures. However, I still have the same startup problem. It never gets past the white screen with gray apple. It's stuck there with the clock continually turning. Is there anything else I could try before getting everything off and wiping the drive clean and starting over? I don't know if it's a hardware or software issue at this point. Thanks for any help you could suggest.
LW

You should at the very least backup your Home folder from it before attempting this, but it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120

MacBook Pro won't get off startup screen with apple logo. Help?

Could someone please tell me how I can get my macbook to get off that stupid startup screen with the apple logo? It won't go past that screen and boot properly. I have tried reinstalling OS X didn't work. I tried running a disk utility test and no errors where found. I don't have the time machine thingy so I couldn't try that. Is there anything else I can do before taking it to Apple and l
paying hundreds of dollars???
thanks in advance!!!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

TS3824 2011 mac mini won't go past white screen with apple logo

Similar Messages

Maybe you are looking for