TS3833 Getting error -50 but updates current. Ipod classic 120GB

Getting error -50 message, can't download song from Itunes to Ipod, when I try to sync my Ipod Classic 120GB. Ran self test and the connectivity test showed all ok but then ran sync test and it showed that no Ipod was found. Just doesn't make any sense. All updates and versions are current, Itunes 10.6.3

In the course of your troubleshooting to date, Connie, have you worked through the following document?
[iTunes displays a -69 error when syncing iPod|http://support.apple.com/kb/HT1210]

Similar Messages

  • HT201210 I'M TRYING TO UPDATE TO IOS 6 BUT I KEEP GETTING ERROR MESSAGE sOFTWARE UPDATE fAILED: AN ERROR OCCURRED DOWNLOADING IOS 6

    I'M TRYING TO UPDATE TO IOS 6 BUT I KEEP GETTING ERROR MESSAGE sOFTWARE UPDATE fAILED: AN ERROR OCCURRED DOWNLOADING IOS 6

    I Tried for three days to download iOS 6 and kept getting error 1403. I finally went to the apple store and they couldn't figure it out either.
      I finally got it to download and all I did different from the other 100 times was I went into settings and on the Bluetooth setting I put NO.  Not sure if that's what did it but that was the only thing different that I did.

  • My CC update keeps failing on error code 205. I have retried several times and it keeps going to error. I have tried to uninstall CC but I get error that previous update is still running.

    My CC update keeps failing on error code 205. I have retried several times and it keeps going to error. I have tried to uninstall CC but I get error that previous update is still running.:

    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools

  • HT201210 Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions

    Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, and 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    Errors related to downgrading iOS

  • I am having iPod classic 120GB Serial Number:8K913VF:2C7 I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1

    I am having iPod classic 120GB Serial Number:8K913VF:2C7
    I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1429, 1430, 1436, or 1439.
    How I can obtain suitable software for iPod classic 120GB Serial Number:8K913VF:2C7

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

    My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • Ipod classic 120gb won't sync music. keep getting an error message =(

    Hi, i have a ipod classic 120GB. Have had it for a while now. And this is the first time i have come across this syncing error message.
    attempting to copy "connie" failed. An unknown error occured [-69]
    I tried to restore it , but it won't allow me to do that either.
    My daughter could sync hers, but i have tried a few times and get the same message. PLease help........
    I am running IE8.
    thankyou
    Connie

    In the course of your troubleshooting to date, Connie, have you worked through the following document?
    [iTunes displays a -69 error when syncing iPod|http://support.apple.com/kb/HT1210]

  • Need to get firmware 2.0.4 on to my ipod classic 120GB (on PC). Currently running 2.0.1. How do I do this please?

    Hi there
    I'm trying to hook up my ipod classic 120GB (serial no ends in 2C7 so think its 6th Gen?) to my Audi in car entertainment system. When I hook it up the car is telling me the ipod is not compatible. I think I'm using the right cable as the car is only 4 days old and the cables came with it. When I check the system requirements in the car manual, it states that Classics are compatible running on 2.0.4. My ipod is on 2.0.1. Itunes tells me there are no software updates pending. How do I get my ipod to run on 2.0.4 firmware?
    Any help would be appreciated!
    Thanks
    Paul

    Oh, and I've also tried to hook up a different ipod (8GB Ipod touch)which worked on the same cable. So dont think its an error with the cable or the car!?

  • I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

    I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

    Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

  • Cant update my ipod error 3194, cant update my ipod error 3194

    cant update my ipod error 3194, cant update my ipod error 3194

    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "For more Error 3194 steps see: This device is not eligible for the requested build above.
    If you're still having issues feel free to check out this useful KB article: http://support.apple.com/kb/ts1275

  • My ipod classic 120gb doesn't restore when i try??? error 1429 pops up? how can i get it work again?

    my ipod classic 120gb doesn't restore when itry? error 1429 pops up. what can i do to get my ipod working again??

    Found an article that describe the issue you are facing:
    http://support.apple.com/kb/ts1372

  • I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

    I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

    Not all car systems are compatible with the iPod touch.  Does the documentation/website for the car system say it is compatible with an iPod with iOS 5?

  • Getting error message while updating Job attributes using PP03 for IT1641

    Hey Guys,
    We are getting error message while updating Job attributes using transaction PP03 for IT1641 (WC Attributes for JOB): 'Client has status not modifiable'.
    Update to the infotype 1641 should not require open SAP system. Would anyone suggest any SAP note/solution?
    Thanks...
    Edited by: Karan Gheewala on Apr 3, 2008 9:06 PM

    Solved using Note 123383 - WC: Customizing worker's compensation tables
    Thanks,..

  • Is itunes movie downloads working? keep getting error 50 but have an internet connection

    is itunes movie downloads working? keep getting error 50 but have an internet connection and able to see items in the store

    Hello.
    Certain types of software can affect the way a computer sends and receives information from the Internet. This article may help you resolve the issue:
    Information about error -50 and downloading videos
    http://support.apple.com/kb/TS1583
    If it did not work, contact iTunes Store via (http://www.apple.com/support/itunes/store/) and/or Apple Tech Support via 1-800-275-2273.

  • HT4623 i am getting error 1604 while updating iphone 4

    I am getting error 1604 while updating my iphone 4 to ios 6.01. how to update the phone 

    look here also.
    http://support.apple.com/kb/TS3694

Maybe you are looking for