TS3899 Email locked. Tried disconnecting and reconnecting without success

Email is locked.  Tried disconnecting and reconnecting but without success.  Safari is working ok and no problems with provider.  Any solutions please

Hello Sher.
If you're talking about the menu bar, press ALT or F10 in your keyboard to make the Menu Bar temporarily visible. If you want it to be permanently visible, go into ''View > Toolbars > Menu Bar'', or right-click the Navigation Toolbar (the Reload button, for example) and select ''Menu Bar''.
If this doesn't help, right-click the navigation toolbar, select ''Customize...'' and click ''Restore Default Set''. If it doesn't appear right away, try pressing ALT or F10. You can go into ''View > Toolbars > Menu Bar'' to make it permanently visible, or right-click the Navigation Toolbar and select ''Menu Bar''.
If none of this helps, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Try disabling all add-ons (just to check), to see if Firefox goes back to normal.

Similar Messages

  • I have lost the task bar/start menu, how do I get them back? I have tried uninstalling and reinstalling without success, the other user on my computer does not have this problem.

    Yesterday, I went to the site for levno computers, using my web access for my work email. I opened the page to view the outlet items and was never able to get back out of it. Finally used ctrl,alt,delete and ended the task. After that the this is what my task bar looks like, I cannot resize or exit using tabs at the top or bottom they are not showing, nor is start showing in the lower left hand corner where I like it. I tried uninstalling and reinstalling that did not help.
    == This happened ==
    Every time Firefox opened
    == July 9, 2010

    Hello Sher.
    If you're talking about the menu bar, press ALT or F10 in your keyboard to make the Menu Bar temporarily visible. If you want it to be permanently visible, go into ''View > Toolbars > Menu Bar'', or right-click the Navigation Toolbar (the Reload button, for example) and select ''Menu Bar''.
    If this doesn't help, right-click the navigation toolbar, select ''Customize...'' and click ''Restore Default Set''. If it doesn't appear right away, try pressing ALT or F10. You can go into ''View > Toolbars > Menu Bar'' to make it permanently visible, or right-click the Navigation Toolbar and select ''Menu Bar''.
    If none of this helps, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Try disabling all add-ons (just to check), to see if Firefox goes back to normal.

  • How to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?

    Hi, I would be very grateful if someone could tell me how to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?
    The thing is that as I have a dynamic IP address, everytime I restart the internet connection my IP address changes. I sometimes need it to change, so I need to restart the connection. I don't know another way to restart the connection than restarting the whole Time Capsule.
    Thanks!!
    PD: the computer I use is Windows based, using the Airport Utility for Windows, but I also have a MacBook Pro I could use and an iPhone too.

    The utility in windows is very like Mac so the screenshots are from Mac as I don't have windows available now.
    How this works depends on the setup of the TC.. which you did not tell us.. you cannot change anything if you do not have the TC as the main router in the network.
    So on the internet tab you need to share a public IP address.
    On the next tab where you set IP address.
    Click the renew IP address.
    It might work.. and it might not.. the problem is you are not disconnecting the network.. sometimes the hard disconnection is required before the address will renew..
    What about unplugging the WAN port.. then click renew the IP which will fail.. then plug the wan back in again.
    In the end it is easier and faster to power cycle the TC.

  • Have an iMac 2008/09 on starting today I have a white screen, an apple icon and a constant rotating sun, nothing else. I've tried turning off and disconnecting and reconnecting the power lead with the same results. Any thoughts? Many thanks Matt

    Have a 2008/9 iMac on starting up today I have only a white screen, apple icon and a continuous  revolving sun. Have tried turning off and on and disconnecting and reconnecting the power with no affect - any thoughts or advice please. Thanks Matt

    If your iMac came w/system DVDs, do the following:
    Disconnect all devices from the computer then do the following:
    Boot up from your DVD that originally came w/the iMac while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
    If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.

  • I plugged my ipod into my computer to load up new tunes and it froaze on the time I dad connected it with the message 'do not disconnect' on the screen.Despite disconnecting and reconnecting it and ensuring it was charged up it will not operate. The 'lock

    I plugged my ipod into my computer to load up new tunes and it froaze on the time I dad connected it with the message 'do not disconnect' on the screen. Despite disconnecting and reconnecting it and ensuring it was charged up it will not operate. The 'lock' symbol is showing at the top of the screen even when I have moved the lock switch. I have been using my ipod for several years with no similar fault. What is the problem/solution?

    I would first try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    Next would be to restore the iPod from backup

  • IPod sync failed. Disconnect and reconnect, then try again.

    Over the past month or two, I have gotten this message quite frequently with my iPod. It usually happens after I sync my iPod once, leave it hooked up to my iMac for charging, and then try to sync again (sometimes not even more than a few minutes later). I also often have trouble getting my computer to recognize the iPod (or getting my iPod to recognize that it's supposed to start syncing) without having to disconnect and reconnect it and shake the USB cord around a few times.
    I had a little bit of this problem with my iPod 5G and XP PC, though no "iPod sync failed" messages ever. This is a new iPod classic and an iMac. What's going on?
    Does anyone else have this happen to them?

    I'd been having this same issue and kept trying all the suggestions on the forums to no avail. Then I just disabled "Enable Disk Use", which required me to first disable "Manually manage music & videos". I unchecked all of my music, videos, podcasts and photos, applied the settings, then chose which media I wanted in my iPod. I synced successfully and even cleared it out completely a couple of times to re-sync. No issues anymore.

  • Several times a day my HP Laptop disconnects and reconnects to my WRT600N router.

    I’ve installed a new WRT600N.  (Firmware Version: 1.01.35 build 5_20080115).
    My install was a “Linksys EasyLink Advisor” guided and is generic.  SPI Firewall Protection is enabled.  Security Mode is enabled for WPA-Personal.
    The laptop I use with router is an HP/Compaq 6710b (also new), running XP Pro.  The built-in WiFi adapter is a “G” type (Intel PRO/Wireless 394ABG) with “Windows Wireless Network Connection” enabled.
    Presently I don’t use the “N” capability of the router.  However, I plan buy a 2nd laptop with an “N” WiFi adapter soon.
    The router works well…most of the time. Signal strength is “Very Good”.  However, several times a day my HP Laptop disconnects and reconnects to the router.
    Each time this happens I get a “Linksys EasyLink Advisor” prompt stating “Network Problem!...the connection to the router is not working”.
    After experimentation I realize that most often the connection will restore by itself…or worst case; I can re-detect and restore the connection using either the “Linksys EasyLink Advisor”  wizard OR the “Windows Wireless Network Connection” wizard.
    Besides losing the connection, the most annoying part of this is that after the connection is restored and the “Linksys EasyLink Advisor” wizard message remain indicating: “Network Problem!...the connection to the router is not working”.  
    Suggestions?

    There are many causes for poor wireless connections, and many solutions:
    First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
    In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
    Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
    Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. If your current network is not listed, enter its info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".
    If the above does not fix your problem, download and install the latest driver for your wireless card.
    Some users have reported improved wireless performance by switching from WEP to WPA encryption.
    If you continue to have problems, try the following:
    For wireless n routers, try setting the "n Transmission Rate" to 162 Mbps, and the (wireless g) "Transmission Rate" to 54 Mbps.
    If you still have trouble, download and install the latest firmware for your router. After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
    Hope this helps.

  • Macbook won't start or charge unless I disconnect and reconnect the battery connector each time .

    I have a late 2011 model Macbook Pro, 10.7.5 OS and I've had no issues whatsoever up until a week ago. The night before if stopped working I did everything as usual, did some HW, emailing then I shut it down. I woke up the next morning and it wouldn't turn on so I figured it was dead, so I got my charger plugged it in and got no light, green or orange. What I got was a faint green blinking on the charger light and my battery level indicator wasn't working. I thought it was my charger but it wasn't because worked fine on my girlfriend's Macbook.
    I googled and tried PRAM and SMC to no avail. When I tried the SMC I didn't take the battery out I just disconnected the connector (Don't know if it makes a difference) and Voila it worked and I thought I fixed the problem. I turned it off and the next day the same thing, I have to disconnect and reconnect the battery connector each time for it work. Other than this issue I have no problems, mac runs fine while it's on and I shut it down or restart it for awhile after I reconnected the battery but if I try to turn it back on or restart it hours after I've done that then it won't work . One thing I may add is after I reconnect and plug my charger in, the light is green for about 5 seconds (even though it's not fully charged) then turns orange .
    I'm guessing I need a new battery or logic board , but I'll keep my fingers crossed .
    I won't be able to set up an appointment until next week but I would like to see if I could get any help here in in the meanwhile.
    Thanks !

    Hi, I dont know if this may be the cause as i too have the same problem. But it only occurs after i disconnect my Iphone from my macbook pro.
    The Macbook has worked perfectly and then all of a sudden last week it started to shut down after i would disconnect my Iphone 5.
    The mac wouldn't restart, charge or anything.
    I tried all the trouble shooting reccommended, Shift Alt command button combinations. ( there were a fair few ) None worked.
    Then i found out about disconnecting the connector.
    This fixed the problem.
    But alas, It done it again after my next sync.
    This has done it 4 times now. And only when i disconnect the iphone after using itunes on the mac. I done it all correctly 3 times and the 4th time i just pulled it out with out ejecting from itunes, but still done it.
    The iphone Syncs perfectly. I get everything i want onto the iphone. But for some reason as soon as the cord is disconnected from the mac BOOM. Dead mac.
    If i leave the cord and the phone plugged in but still eject the phone it doesnt shutdown tho.
    I found if i shutdown the macbook, then disconnect the iphone cord once the mac is completely shut down then my mac will start back up again with no problems.
    As i said i dont know if this is the cause of your problem and if it will help you or not? But if not, maybe it will help someone else out who finds your post?
    Hope you get your problem sorted
    Chris

  • IPhone 3G WiFi disconnects and reconnects every few seconds

    hey guys
    i just updated my phone to 4.0.1 and lately (before the update as well) my iphone has been playing up on me
    Like the wifi works and all but when i go to the appstore for example...it disconnects and reconnects constantly and stops downloads cause it stops like 1-2 secs it begins.
    i tried everything resetting network settings, turning phone on/off, DFU mode, taking off WPA and broadcasting the modem, it just doesnt want to work.
    Mind you this was working for around a month and just like 2 days ago this happens and i cant fix it. I even tried the McDonalds free wifi and that works but its very slow couldnt download anything but it didnt disconnect/reconnect
    Also the router is working on both the Wii and PS3 without a prob, just these 2 days on my iPhone
    any suggestions?

    I upgraded my 3G to 4.0.1 and had the same issue - could not connect to my secure wireless network. It DID, however, connect to my neighbor's unsecured network. I tried resetting Network Settings, resetting All Settings, rebooting my iPhone, rebooting my router, multiple times, all without luck.
    I had to do a FULL RESTORE from iTunes, install as a NEW PHONE and now I can connect to my wireless network. But even after the full restore, I don't see any improvement in phone performance. Still slow, still laggy, still crashes (requiring a reboot) with some apps. And now I have a phone set back to factory default. Grr.

  • When leave I nano 4th gen connected to either of my cars it no longer restarts playing when car is restarted. Instead it shows 'no entry' in the song title on the car audio display and won't play until disconnected and reconnected.

    Nano has worked fine for a couple of years being left connected to either one of our cars. However, every time car is restarted it won't play without being disconnected and reconnected. I have done a full restore.
    Current cars are Range Rover Sport 2011 and Jaguar XK 2011.
    Has anyone else experienced this issue?
    Thanks,

    I had a similar problem. Try resetting and erasing the phone and restoring from a known good backup.

  • If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.

    If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.

    1. Why don't you purchase it from Apple? I'd be wary with eBay sellers - and, after all, Apple posts their stuff everywhere, even if you live in a country without a localized Apple store webpage or local (physical) Apple stores.
    2. when it comes to adapters / cables like these, NEVER purchase ANYTHING non-Apple-manufactured! Most of the cheap(er) knock-offs don't work! That is, don't try to save on going for a cheaper alternative - it most likely won't work.
    Here are the links:
    http://store.apple.com/us/product/MD098ZM/A
    http://store.apple.com/us/product/MC552ZM/B

  • Keeps disconnect and reconnect

    I have a retina Macbook Pro 13"(latest), iPad(3rd genernation), iPhone 5 and iPod shuffle(latest) and I am sure all their systems as well as iTunes on my Macbook Pro are latest version. The thing is that whenever I connect my iPad and iPod shuffle and try to sync using iTunes it just keeps disconnect and reconnect. At frist I thought there might be some problem with my USB port, so I tried both of my USB ports and it keeps behave like that. And the wired thing is, it did not happend to my iPhone 5 so far. So it is most likely that there are problems with the iTunes.
    So I just want to ask is there anyone encounter the same problem and if you know how to fix this problem plsssssss tell me. Thx.

    I think these problems were hopefully solved by recent update of Itunes.

  • ICloud mail does not reconnect in Mail application on MacBook Pro after disconnecting and reconnecting iPhone or after sleep

    iCloud mail does not reconnect in Mail on my MacBook Pro after sleep or after disconnecting and reconnecting my iPhone. This only happens when I use my iPhone as a 3G-modem and not when I am on Wi-Fi. The only solution seems to be to quit the Mail-application and restart it again. Then Mail reconnects to iCloud.

    Hi horstp,
    Given your description of the issue (works on other Macs), it may be worth trying to set up that account by itself in a new test user on the iMac to see if it can be isolated to a user-specific file. You may find the following article helpful:
    Apple Support: Isolating an issue by using another user account
    http://support.apple.com/kb/TS4053
    Regards,
    - Brenden

  • MY IPOD IS DISCONNECTING AND RECONNECTING ITSELF.

    Okay I've been having problems with my iPod ever since I did the loading my whole library onto my iPod. I've been getting the stupid ! with the folder symbol. It always gets frozen and I can't get it out of being frozen. When I connect it to my Computer, it's not recognized and it keeps on disconnecting and reconnecting itself and showing the stupid apple logo then the folder with the "!" on it. 10 Seconds later it does the same thing. It connects then reconnects. AND ON TOP OF ALL OF THAT IT'S MAKING THIS WHIRRING SOUND AND SKIPPING ALL OF MY SONGS WHEN I'M NOT EVEN TOUCHING THE BLASTED PIECE OF CRAP!
    SOMEONE HELP ME!!! THE STUPID CRAP IS PRACTICALLY SENDING ME INTO A FIT OF TEARS BECAUSE IT WON'T STOP BEING STUPID!

    okay I've sorta of fixed it. I don't know it just started to get recognized by the computer but I still ahve a problem. My iPod shows the apple logo and it's lit up and it's NOT GOING AWAY NO MATTER WHAT. Someone help me please.
    I've like tried EVERYTHING.

  • How do I delete email from my iPad and iPhone without deleting it from my laptop?

    how do I delete email from my iPad and iPhone without deleting it on my laptop. I'm trying to free up space.

    It would depend on the type of mail account you are using. If you have an IMAP or Exchange account deleting mail from one client is going to sync to the other clients. You cannot remove from one device and not the others. POP mail however, does allow one to delete mail from one client and it remain on the other clients. Because POP mail is downloaded to the individual clients, whereas mail in IMAP and Exchange resides on the server, and is just viewed on the individual machines.

Maybe you are looking for

  • Error message to be thrown when multiple enteries are not entered

    Hello Guys, I have used a select-options with no intervals in the selection screen. If the user enters one value in the range, its working. But I want a error message to be thrown when only one entry is entered. User should enter more than one entry

  • DOM parsing from memory avoid deprecated class usage

    I am parsing an xml file from memory stored in a StringBuffer xmlBuffer like this try {                DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();                DocumentBuilder db = dbf.newDocumentBuilder();                Inp

  • Can i resize comments in Numbers?

    This seems such a simple thing to want to do but I can't seem to do it. Can anyone advise whether it is possible please. At the moment my huge comments are covering portions of the spreadsheet which I need to see in printed form.

  • Printing problem after acrobat upgrade

    Hi, I am running Mac OSX 10.8.5 and have recently updated my Acrobat to 11.0.04. Since doing this I am experiencing problems printing my pdf files to my desktop printer, which is a Xerox phaser 7500 duplex printer. When sending the file across it jus

  • Create a photo collage from iphoto

    I am trying to create a photo collage from pictures from iphoto but I have no idea where to begin. What program do I open for this and do I do a lot of cutting and pasting? I am new to the computer thing so any help would be great.