TS3899 how to send an iphone 4S video to email on my PC?

How do I upload an Iphone 4S video into an email on my PC? It will not upload because the file is too large (39 seconds). I am using Verizon email. I down loaded Freemake video to correct the upside down issues, but now I cannot share the video with family. This is my first time using the video feature.

Follow the relevant instructions on this support document. Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

Similar Messages

HT201290 how fail send Airdrop Photos and Videos to and from OS X 10.10.2 and iOS 8.

how fail send Airdrop Photos and Videos to and from OS X 10.10.2 and iOS 8.

Airdrop Photos and Videos to and from OS X 10.10.2 and iOS 8.

How do you transfer iphone 4 videos to the cloud?

How do you transfer iphone 4 videos to the cloud?

use iphoto and import the videos and pictures, then burn a disc.

How to send txt file as attachement in email

Hi Experts ,
How to send txt file as attachement in email .
which function module i use

Hi,
Try to use this one
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
Hope it can solve your problem!
Good luck!
Tao

How to send more than 1 attachment thru email

Hi All,
Need to know how to send more than one attachment through email. I need the coding part of it.
Thanks in Advance.
Balaji

Hi Balaji,
Check this thread
Sending mail with 2 attachments
Regards,
Santosh

TS3899 How to send video on email

Is there a way to send a large video on email.

Hi, there is a way:
1. You can go into the camera roll and press and hold on the video to copy it and paste it into the email document as a .mov file
2. You can press and hold inside of your email and tap on "inset a video and picture" and choose on the file
Any help let me know...
Thanks,
TechnologyGuy

How do i import iPhone 4s video to iphoto

I cant get the videos on my iPhone 4S to sync wirelessly into iphoto. Is this not possible or am i just overlooking some little checkbox somewhere?

I'm having the same problem. With photostream enabled in iPhoto '11 (9.2.1) and preferences set to copy/import into an event yet it doesn't move over movies shot on my new 4S. I figured its because the file might be a little on the large size because of the new camera. But with the phone plugged in via usb to the mac and iPhoto open it doesn't show up like it used to do. Same in iMovie: it doesn't see the iPhone as a 'camera attached' from which to import videos. The only options given to export from the phone are 'Message' and 'email' which probably means compression. So how do we save our 1080 videos shot on the 4S to our macs ?
turning photostream off does not do anything to make the iPhone appear either.
Setting preferences for the iPhone in iTunes to 'include movies' in the photos tab doesn't do anything.
Can't find the iPhone in Finder either.

How can I import iphone 4 videos to iMovie 09?

I tried different ways to import my videos from iphone 4 (.mov) to iMovie 09 but I had no success. I transfer the video to my iMac using image capture, then try to import the video to iMovie, but seems iMovie does not recognize the video format .mov from the iphone 4. Can anyone tell me how can I do this?
Thanks a lot for the help

I have no problems with iphone 4 video, have you edited it on the phone or anything.

How do I get iPhone 3GS videos to automatically sync t Apple TV?

How can I get the 3Gs video clips automatically to my Apple TV? They seem to just import in to iPhoto, but I'm not sure how to get them from there in to iTunes (Movies) automatically.
Do I need to manually drag them in to iTunes each time I have a new clip?

OK thanks - was just hoping that there'd be a slicker way of doing this.
Like an "automatically import videos into to itunes"-checkbox in iPhoto or something.

How to send a 2 minute video ??

I can't send a 2 min video I have in my phone , thru email or blackb messenger what can I do?

You could plug the device into the laptop via USB and you will see the device show up and you can browse to the file and copy to your computer. If it isn't too large you can email to your self. If you don't have a USB cable handy but have your phone connected to wifi you can install WiFi File Explorer - Android Apps on Google Play
and once you run it you can then use a web browser to browse the files on your phone and download to your phone.

How to set up iPhone 5 iOS 6 email with IMAP over SSL on a custom port?

Basically I have the same problem as this guy 5 years ago but the thread contained no useful answer. Maybe there are people out there who became smarter in the meantime? Please help me out how to get my iPhone read emails via IMAP over SSL on a custom port to the corporate server. The issue is that the iPhone only seems to work if you use the standard 993 port for IMAPS, not with a custom port as we have. I've installed the corporate root certificate in a profile, and it shows up as trusted and verified in the phone, so that should not be the issue. The mail app in the iPhone tries to connect, I can verify that from the server, but then does nothing, doesn't try to authenticate, doesn't log out, nothing is going on, and then drops the connection after 60 seconds. Repeats this every 5 minutes (as set to fetch e-mail every 5 minutes.)
Original thread 5 years ago: https://discussions.apple.com/message/8104869#8104869

Solved it by some (a lot) of fiddling.
Turns out it's not a bug in the iPhone, it's a feature.
Here's how to make it work.
DOVECOT
If the IMAPS port is anything other than 933 (the traditional IMAPS port) the iPhone's Mail App takes the "Use SSL" setting on the IMAP server as 'TLS', meaning it starts the communication in plain text and then issues (tries to issue) the STARTTLS command to switch the connection to encrypted. If, however, Dovecot is set up to start right away in encrypted mode, the two cannot talk to each other. For whatever reason neither the server nor the client realizes the connection is broken and only a timeout ends their misery.
More explanation about SSL/TLS in the Dovecot wiki: http://wiki2.dovecot.org/SSL
So to make this work, you have to set Dovecot the following way. (Fyi, I run Dovecot 2.0.19, versions 1.* have a somewhat different config parameters list.)
1. In the /etc/dovecot/conf.d/10-master.conf file make sure you specify the inet_listener imap and disable (set its port to 0) for imaps like this:
service imap-login {
inet_listener imap {
    port = --your port # here--
inet_listener imaps {
    port = 0
    ssl = yes
This of course enables unencrypted imap for all hackers of the universe so you quickly need to also do the things below.
2. In the /etc/dovecot/conf.d/10-ssl.conf file, make sure you set (uncomment) the following:
ssl = required
This sets Dovecot to only serve content to the client after a STARTTLS command was issued and the connection is already encrypted.
3. In /etc/dovecot/conf.d/10-auth.conf set
disable_plaintext_auth = yes
This prevents plain text password authentication before encryption (TLS) is turned on. If you have also set ssl=required as per step 2, that will prevent all other kinds of authentications too on an unencrypted connection.
When debugging this, please note that if you connect from localhost (the same machine the server runs on) disable_plaintext_auth=yes has no effect, as localhost is considered secure. You have to connect from a remote machine to make sure plain text authentication is disabled.
Don't forget service dovecot restart.
To test if your setup works as it's supposed to, issue the following (green) from a remote machine (not localhost) (I'm using Ubuntu, but telnet and openssl is available for almost all platforms) and make sure Dovecot responds with something like below (purple):
telnet your.host.name.here yourimapsportnumber
* OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS LOGINDISABLED] Dovecot ready.
Most importantly, make sure you see 'STARTTLS' and 'LOGINDISABLED'. Then issue STARTTLS and hopefully you see something like this:
a STARTTLS
a OK Begin TLS negotiation now.
(The 'a' in front of STARTTLS is not a typo, a prefix is required by the IMAP server in front of all commands.)
Close the telnet (with 'a logout' or Ctrl+C) and you can use openssl to further investigate as you would otherwise; at the end of a lot of output including the certificate chain you should see a line similar to the one below:
openssl s_client -starttls imap -connect your.domain.name.here:yourimapsportnumber
. OK Pre-login capabilities listed, post-login capabilities have more.
You can then use the capability command to look for what authentication methods are available, if you see AUTH=PLAIN, you can then issue a login command (it's already under an encrypted connection), and if it's successful ("a OK Logged in"), then most likely your iPhone will be able to connect to Dovecot as well.
a capability
* CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN
a login username password
* CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS
a OK Logged in
POSTFIX
Likewise, you have to set Postfix to wait for STARTTLS before encrypting the communication.
1. You have to delete the setting smtpd_tls_wrappermode=yes from /etc/postfix/master.cf and/or /etc/postfix/main.cf, if it was enabled. This will mean Outlook won't be able to connect any more because it requires a TSL connection without issuing STARTTLS as per Postfix documentation (haven't tested.) In my case we don't use Outlook so I didn't care. Outlook + iPhone + custom SMTPS port are simply not possible together at the same time as far as I understand. Pick one to sacrifice.
2. Require encrypted (TLS) mode for any data transfer in /etc/postfix/main.cf:
smtpd_tls_security_level = encrypt
3. Authentication should only happen while already in encrypted (TLS) mode, so set in /etc/postfix/main.cf:
smtpd_tls_auth_only = yes
Don't forget postfix reload.
To test if this works, issue the following telnet and wait for the server's greeting:
telnet your.host.name.here yoursmtpsportnumber
220 your.host.name ESMTP Postfix (Ubuntu)
Then type in the EHLO and make sure the list of options contains STARTTLS and does not include an AUTH line (that would mean unencrypted authentication is available):
ehlo your.host.name.here
250-STARTTLS
Then issue starttls and wait for the server's confirmation:
starttls
220 2.0.0 Ready to start TLS
Once again, it's time to use openssl for further testing, detailed info here http://qmail.jms1.net/test-auth.shtml
CERTIFICATES
You also need to be aware that iOS is somewhat particular when it comes to certificates. First of all, you have to make sure to set the following extensions on your root certificate (probably in the [ v3_ca ] section in your /etc/ssl/openssl.cnf, depending on your openssl setup), especially the 'critical' keyword:
basicConstraints = critical,CA:true
keyUsage = critical, cRLSign, keyCertSign
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid:always,issuer:always
And then on the certificate you sign for your mail server, set the following, probably in the [ usr_cert ] section of /etc/ssl/openssl.cnf:
basicConstraints=CA:FALSE
keyUsage = nonRepudiation, digitalSignature, keyEncipherment
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid,issuer
subjectAltName = DNS:your.domain.name.here
issuerAltName=issuer:copy
Please note, the above are results of extensive google-ing and trial and error, so maybe you can omit some of the stuff above and it still works. When it started working for me, I stopped experimenting because figuring this all out already took way too much time. The iPhone is horribly undocumented when it comes to details of its peculiar behaviors. If you experiment more and have more accurate information, please feel free to post here as a reply to this message.
You have to import your root certificate into your iPhone embedded in a profile via the iPhone Configuration Utility (free, but only available in Windows or a Mac; details here: http://nat.guyton.net/2012/01/20/adding-trusted-root-certificate-authorities-to- ios-ipad-iphone/ ), after having first added it to Windows' certificate store as a trusted root certificate. This way the Utility will sign your certificate for the phone and it becomes usable; if you just add it from the phone it will be there but won't be used. Using a profile has the added benefit of being able to configure mail settings in it too, and that saves a lot of time when you have to install, remove, reconfigure, install again, etc. a million times until it works.
Another undocumented constraint is that the key size is limited to a max of 4096. You can actually install a root certificate with a larger key, the iPhone Configuration Utility will do that for you without a word. The only suspicious thing is that on the confirmation screen shown on your iPhone when you install the profile you don't get the text "Root Certificate/ Installing the certificate will add it to the list of trusted certificates on your iPhone" in addition to your own custom prompt set up in the iPhone Configuration Utility. The missing additional text is your sign of trouble! - but how would know that before you saw it working once? In any case, if you force the big key certificate on the device, then when you open the Mail App, it opens up and then crashes immediately. Again, without a word. Supposedly Apple implemented this limit on the request of the US Government, read more here if you're interested: http://blogs.microsoft.co.il/blogs/kamtec1/archive/2012/10/13/limitation-of-appl e-devices-iphone-ipad-etc-on-rsa-key-size-bit.aspx .
IN CLOSING...
With all this, you can read and send email from your iPhone.
Don't forget to set all your other clients (Thunderbird, Claws, etc.) to also use STARTTLS instead of SSL, otherwise they won't be able to connect after the changes above.

TS3899 How can I place an attachment onto outgoing emails on the iPad ?

How can I place an attachment onto outgoing emails on the iPad ?

If it's a photo or video, you type out your mail then hold your finger down in the body of the mail to get the pop up to attach a photo.
If it's another kind of file you have to open it in the app it 'lives' in....for example your word processing app for a document, then look for the little box with the arrow, tap that and you should have the option to send that file to be mailed.

How to send zip file as attachment through email

Hi All,
I am having a requirement that I need to download the internal table data into .txt file and I need to zip the text file. And this zip files needs to send to the customer through email.
I am able download the data into .txt and able to zip the file. But I am not able send the .zip file through email.
I know that we can send .xls, .txt, .csv and also .ppt, .doc file types we can send as an attachement through abap program. But I don't know about .zip files. Is there any possibilty to send .zip file as an attachment thorugh email.
Can any one help me how to send a .zip file thorugh email as an attachment.
Regards,
vinod

hi Vinod,
Can you please tell me how you have zipped the file.
I am having a text file in application server. I need to zip that file. Then the middleware moves it to Legacy system.
I used the following code. With this I am having the data in Binary format which my midleware cannot understand.
What I need on the whole is just to reduce the size of the file.
form ZIP_FILE .
DATA: lt_data TYPE TABLE OF x255,
lt_textdata TYPE TABLE OF x255.
DATA: ls_data LIKE LINE OF lt_data.
DATA: lv_dsn1(100) VALUE '/ECD/120/GIS/FTP/IB/DNBPAYDEX.TXT'.
DATA: lv_dsn3(100) VALUE '/ECD/120/GIS/FTP/IB/DNBPAYDEXZIP.zip'.
*DATA: lv_dsn3(100) VALUE '/interfaces/SM5/test.zip'. " Contains sample1.xls and sample2.xls
DATA: lv_file_length TYPE i.
DATA: lv_content TYPE xstring.
DATA: lo_zip TYPE REF TO cl_abap_zip.
CREATE OBJECT lo_zip.
Read the data as a string
clear lv_content .
OPEN DATASET lv_dsn1 FOR INPUT IN BINARY MODE.
READ DATASET lv_dsn1 INTO lv_content .
CLOSE DATASET lv_dsn1.
lo_zip->add( name = 'sample.TXT' content = lv_content ).
lv_content = lo_zip->save( ).
*clear lv_content .
Conver the xstring content to binary
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = lv_content
IMPORTING
output_length = lv_file_length
TABLES
binary_tab = lt_data.
OPEN DATASET lv_dsn3 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT lt_textdata INTO ls_data.
TRANSFER ls_data TO lv_dsn3.
ENDLOOP.
CLOSE DATASET lv_dsn3.
IF sy-subrc EQ '0'.
MESSAGE s999(zfi_ap_gl) WITH text-t10.
ENDIF.
Can you please help.
Thanks Aravind

How to send Run time errors alerts to email ?

Dear Friends,
I am using SAP CRM ABAP 6.0. I am checking run time errors in ST22 transaction. Usually, i check in morning or evening, based on my free time. I feel, dificully in this. so, i need to configure in somewhere for send this runtime error alerts to my office mail id.
We are sending report outputs to our office id. But, i dont know, how to send run time errors with log or with out log to emai id?
thanks in advance.
Rajagopal
Chennai - INDIA

Thanks Dieter.
Now, i have set the background job as per your suggestions. but, i have below doubts:
1. I added my office mail id in spool list receipient. This background job alert mail goes to business work place inbox (SBWP). But, i need, in my outlook mail box.
2. This background job gives all months runtime errors. but, only i need today & yesterday only. I checked in ST22 for create variant. Unfortunately, i did not get option. so, how to set variant?
Thanks in advance.
Rajagopal
Chennai - INDIA.

How to send info from JSP page as email-body

Hi,
i have a JSP page that generates dynamically as a result of some query. I have a Button - "Send Email".
I want to send the information to the receipient thru email automatically on a button click,
All information is in the memory. How can we pick the info from memory and send it as a message thru email?
Pls help.
thanx & regards,
Shalini

create a servlet to send mail (use the JavaMail api) then Post the message to the servlet when you click on the button.
OR, put the message and any other data (like the email address) into the session, and then just call the servlet on click of the button, and have the servlet retrieve the information from the session.

TS3899 how to send an iphone 4S video to email on my PC?

Similar Messages

Maybe you are looking for