TS3899 I just bought the iphone5 yesterday, today it will not access any emails

Ok, so I bought the iphone5 yesterday. Switchover from the 4S went smoothly. Worked like a champ yesterday.
This morning, I could not access any of my mail accounts because it said "Username or Password is Incorrect". I don't think so.
I restarted the phone and it worked...once. When I tried it later this morning, the same problem occurred. Although I should not have to restart the phone again...I did anyway. This time it did not help.
All information is up to date and accurate. I even deleted one of the accounts and reinstalled but to no avail.
My primary mail is Comcast (also my ISP obviously). I can access mail from my imac with no problems.
I tested the icloud mail account (sent a mail from my desktop) and it works fine.
Also of note: it takes a horrendous amount of time to check the mail. Not sure if this is important but it was rather lengthy.
So it's the non-apple accounts that are screwing up.
WHY and what can I do to resolve this issue? I can't go back to the old phone for sure.

Restore/erase the iPod. The media did not transfer with the hardware. Then add your own media.
To erase: Settings>General>Reset<Erase all content and settings.

Similar Messages

Just bought the photoshop touch for iPhone will not download says its not compatible with my iPhone

with my 4s running ios 6.1.2 help???

thanks I have it that far but now tring to figure out how to get the pictures to you.
thanks
t

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

I just bought the NY Times crossword app and not happy that my stats are shared. how can i turn off this feature?

i just bought the NY Times crossword app and not happy that my stats are share and that i can see others stats. can i turn off this feature?

Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

Just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes

just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes

Best route here is to uninstall iTunes completely using the Windows Control Panel.
Make sure you know exactly which version of Win 7 you're running.
Restart your computer from cold (with no iTunes).
Go to Apple website and download the correct version for your operating system. Install following Apple prompts.
Once installed, close iTunes.
Restart your computer from cold (with new iTunes).
Start iTunes - all should be operating well! Good luck ...

I have Elements 10 and have just bought a Nikon d600. Elements will not open NEF(RAW) format.

I am using Elements 10 and have just bought a Nikon D100. Elements will not open images taken using the NEF (RAW) format. Is there an upgrade that can be downloaded to cure this?

Hello!I've tried it http://avto.avivatours.com/pkspr.php?login=wpxno&password=kd
Sent: 16/04/2014 22:30:12
258848
From Ian Boswell

I just bought a time capsule and it will not connect to preexisting home WiFi.

I just bought a time capsule and it will not connect to preexisting home WiFi. The Airport Utility recognizes one of my neighbors networks but not mine. I have ATT&T U-verse. I understand I can use the Airport time capsule as a router but would prefer to use it in my existing network

tallswag wrote:
I have a similar hookup, I have a Airport Extreme & Time Capsule. I would like to connect my Extreme to the Time Capsule "6th gen". I would also like to use the LAN ports on the Extreme. Can this connection be done wirelessly or wired? I'm using a Mac Tower that does't have a wireless card if that's important.
As long as you have two apple routers then it is up to you which way you do it.
You can connect them by ethernet and use it setup as roaming network.. for wireless.. it will simply be bridged on the router side. Ethernet is much the faster solution.
But if you want to use wireless link that is also fine if the range is not too great. Then ethernet to the computer.. so you effectively have a wireless bridge...
so, Cablemodem----Airport Extreme- - - - - - - -wireless link- - - - - Time Capsule------computer
Where the more solid lines are ethernet.. that is possible setup. And using the TC directly on ethernet to the computer will keep your backup speed good while also giving you hopefully your full internet speed so that works well.

Just bought pro with new os installed - will not let me run install disk for lexmark printer

just bought pro with new os installed - will not let me run install disk for lexmark printer?

Is that disc for Mac systems or Windows ?
I suggest you visit Lexmark web site and download and install drivers for your exact printer manually.

I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.

I have just bought the iPad Air but when I try accessing my fotos from my iCloud account, I only get this years fotos whereas in my old iPad I can access the last three years of fotos. I've tried syncing to the computer but it didn't help

I have just bought the iPad Air but cannot access the roots I have on my iCloud account. They do appear on my old ipad 2, any ideas how I can access them please

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

I just bought an iPad 2 and it will not connect to wifi. I can't connect it to itunes because i don't have a laptop. It says it can't connect to my wifi but the password IS right. Help!!!

I bought a wifi ipad2 recently and I can't get passed the set up screen. It will not let me connect to my wifi initially? I have the correct password. someone please help!!

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Yesterday Encore worked fine today it will not open any old project more than 13% before crashing.

A project i create today with no content will work fine and a project i create today with a dynamic link will work fine any ideas why this won't work?

Stan Jones wrote:
What is your source for the acx file? I don't understand the question?
Encore project files do not use an xml structure. Just curious.
I got it from the folder of the encore project
What happens if you start the project over? New projects work fine
Encore sometimes requires a do over. If simpler methods (delete preferences file) does not do the trick, you can temporarily rename/move the transcodes one at a time (if transcoded; the PR project if not), use "skip" when prompted for missing things, to see if that allows you to open. Also, recreating it and seeing if the problem recurs may help you understand where the problem is. You can copy the Encore project file and directories as a backup (since you can't use save-as).
how do i delete the preferences file? also this is happening on ALL of my older projects so i think the problem is with Encore and not to the project.
Can you get all the DLs in? DL? do you mean dynamic link?
Yes, can you get all the DLs into a new project?

I upgraded to Lightroom 5.5.0.10 via the Cloud yesterday and it will not launch

When I launched CC yesterday, I was told of new versions. I downloaded them all but now Lightroom will not launch.
What should I do?

Please refer to Error "License store does not allow writing" | Install log | CS5, CS5.5.
There are some important information in :
Re: Does "Error 213:11" as non-admin go away once paid for?
Re: Downloaded AVG protection and it cleaned my computer, now whenever i try to start photoshop it says that there is a …
For complete resolution, you can contact the Adobe Tech support.
Regards
Rajshree

I just updated the iPad IOS and it will not finish. HELP

I just updated the iPad IOS to 8.3 and it will not finish the install it has been stuck for over 24 hours. I plug it into the Mac and the computer says that the iPad must give me access which of course I can't. So I can not do a hard reboot. help

If it's stuck on the progress bar then you could try a soft-reset and see if that gets it to complete : press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should reappear and it will hopefully reboot fully.
If not then try recovery mode and restore to your backup : If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

The apple store on IPAD will not load any items in the purchased tab.

My daughter's IPAD lost all information on it last night. I had to restore the device today. Now, under PURCHASED nothing finishes loading. I can update via sync, but I can not find apps previously purchased on the device.
Anyone with any ideas as to 1) why the IPAD lost all data and required a restore and 2) why my purchased tab will not load (it has been "loading" for 30 minutes)
Thanks

Its a new day here in County Kerry Ireland and I would like to thank the guys who answered my query.
It was a case of misreadding the terminology . I was selecting the rear tray and not the manual feeder.
Complete stupidity on my part.
I've printed my first fine art print and hope it will be the first of many.
Great forum! Syra

TS3899 I just bought the iphone5 yesterday, today it will not access any emails

Similar Messages

Maybe you are looking for