TS3899 I turn onn my I Pad and click on email, it goes to it, I click on a email and the I Pad shuts off,Why?
I turn on my I Pad and click on email, it turns on, I click on a email. and the I Pad goes off,
I can get on games, Facebook, but not the email or my gas price section?
Why, Please help.
Try giving your iPad a reset. HOld down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. Let it reboot and try again. If there's a glitch that can clear it.
Similar Messages
-
i left my 4s in the car for apprx 35 mins in 35 degree weather and the phone completely shut off and won't turn back on. the battery was fully charged. please help it is my only ways of communicating beyond my macbook
It probably overheated and shut down. Hold the HOME and SLEEP buttons until an Apple logo appears. This will take 10 to 15 seconds of holding both buttons.
-
as listed in the title, my phone just flashes on me no start up just flashes from the apple logo to shutting off and back and forth i did the update this afternoon (9-26-2012) and it still wont start up!!!
Something in your backup may be corrupt. Try wiping it and setting it up as a new device, then sync your apps, data and media back to it from iTunes. DO NOT resotre from your backup. If the problem is contained in the backup, it will bring it right back again if you restore.
-
Press B3 on a keyboard, and the tone never shuts off
This is happening in the ES E synth, the ES M, the ES1, the ES2, and EXS24. And only in Logic, not in Reason or Live.
I select one of these synths, and as soon as I press the B3 key on my MIDI controller keyboard, the key tone will never shut off. All other keys continue to work fine, but that B3 will never shut up again once it is pressed. This happens (currently) 100% of the time for me.
Makes the software pretty useless..Hello korncompaq,
Your computer will not boot.
It sounds like you may have a problem with your board.
I’d suggest take the computer somewhere local and have them check everything out.
Let me know how everything goes. -
I just got a gopro 3 and ejected it the wrong way from my Mac and now I cant move files from my go pro to my Mac.. Can this be fixed?
GoPro Customer Support - FAQ, Troubleshooting, Contact Us
-
Immediately I thought the worst, I just fried my computer. After looking through the forums I did disconnect and reset the battery connector carefully, no progress. When I plug in my charger, the power light shows this dim pathetic green like it has given up on life. I'm now assuming I have a serious problem, before I go to the Genius Bar I want to confirm this here and also I'm wondering if I will have to pay for the damages? If so how much does a replacement board run?
wow!!! i cant believe it!!
it's alive!!!
not sure it helped.. but my macbook works!
'When I explained my symptoms to the Genius tech, he said it sounds like "coma mode". Like Mr. H said, happens when the lid is open and closes to quickly. My machine checked out just fine from the diagnostic check. The Genius tech gave me this tip to get the MacBook out of "coma mode." You have to make sure that you macbook is hooked up to the AC power supply. Then depress the power switch (keep holding it down) and press the Option+Control+Shift keys. Keep these keys held for while counting to 5 and release. You Mac should come out of it coma and be ready to go.'
from:
http://forums.appleinsider.com/t/117896/very-dead-macbook-wont-even-charge
battery seems to work, charging
im confused.. and happy at the same time -
My i pad shuts off. I try to open an icon and it turns off.
Your apps are crashing. So close all of them and reset your iPad.
In order to close apps in iOS 5 or iOS 6, first tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner of the app that you want to close. Tap the home button twice.
Closing apps in iOS 7 works like this. Drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
My iPhone 3Gs randomly shutting off at any given moment. I could be in the middle of a text, a call, or doing some games and it'll just shut off.
Now here's the unique part. When I go to turn it back on, the apple loading screen pops up but it takes somewhere from 3-5 minutes for it to boot up. Then the lock screen with the time and whatnot shows up. From this point on, my iPhone has a chance to shut itself back down and I have to repeat the process over and over again. Most of the time the lock screen flashes and then goes straight to black (shut down) but sometimes I can make it a few menus before it shuts itself down.
The only way to keep the iPhone on is to plug it into a charger of any sort. I'm fairly certain it isn't a battery charge issue because this happens at any % of power and sometimes my iPhone can use up all of its charge and not have this happen while other times I can be at 90-100% and it could randomly shut itself down. What can I do in this situation if some has some solution to this problem please let me know on [email protected] Thanks!Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.
-
i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything
Will u help me or not?
-
I lost my phone and the location service is off. Is it possible to turn it on from another device?
No.
-
Screen goes black, shut the lid for a few minutes, open the lid the turn on chime comes on and the screen comes back to life. The computer itself has continued to update just no screen. After a few minutes goes black again. Is logic board going bad or graphic card issue? Trying to decide if computer is worth repairing as it was made in 2007.
It does sound like you might have a faulty video connection. See if you can make a Genius Bar appointment at your local Apple Store.
-
My iMac turns on the start up chime sounds, you see the apple icon on the screen and then it just shuts off. Any ideas?
Do these two resets:
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Just turned on my Apple TV and the Netflix and I-Cloud options are gone.
Just turned on my Apple TV and the Netflix and I-Cloud options are gone.
Try rebooting ATV and router.
-
My on/off button sticks and today my iPhone shut off and I can't turn it back on. Also it isn't even reponding when I plug it in. Any ideas? Is there some way it can be reset?
If the reset does not help, make an appointment at the Apple store. If your phone is out of warranty and you can't afford what they want, google for local repair services.
-
My ipod touch 2nd generation 8gb wont turn on, i was on my way to my next class at school and it just randomly shut off, its been off ever sense and i don't know whats wrong, it had a good charge and i don't know what to do please help me.
Try here:
iOS: Not responding or does not turn on
Maybe you are looking for
-
Error while trying to assign an empty value
Hi , In my bpel process i get an error while trying to assign an empty output to a variable. It occurs in assign activity copy operation. What can i do? How can i skip this? Sometimes there may be null /empty values ...below is the error message Erro
-
Can I Free Transform/Distort An Object Like Photoshop?
I need to distort an object much the way one would in Photoshop with Free Transform - Distort. That's the one where you can drag the corners wherever it suits your fancy. The closest thing in Illustrator I can find is Effect - Distort & Transform - F
-
Retrival of values based on Batch Characteristics
Dear all I am maintining some characteristics for a material on Batch classes. Like to pull the total stock based on any 1 these characteristics.Kindly suggest what are the tables we can use for this and logic Thanx MK
-
I wonder if I have to uninstall it all first. That, or CC could extend that offer of $9.99 month for the first year of CC. Otherwise, I want to use what I have already invested in and need access too asap. If anyone can help. I dread having to unin
-
Hi There, I have template setup in Essbase Excel Addin, however when I try to use SmartView to retrieve, I got the following error: "Invalid free form, row 4 invalid, it has repeat members of a dimension and mutiple dimensions" Wondering why it is wo