TS3899 outgoing mail server changes spontaneously

My outgoing mail server settings for my domain email (Imap compliant) have spontaneously changed a couple of times now, and it seems to be related to when I update my iPhone software.  Has anyone else experienced this?
Thanks!

Who is your e-mail provider?
It depends on your e-mail provider, check their website for outgoing port.
Try 587.

Similar Messages

  • IPhone 2.0 Outgoing Mail Server changes

    It appears that the outgoing mail server settings in 2.0 are trying to alleviate the problems of switching between your ISP and AT&T (i.e. WIFI to Edge/3G) so that our non compatible email accounts will work in both environments for outgoing mail. Has anyone seen a thread or Apple article that addresses this area of the new software as I would like to understand it better? Seems that my attempts to set up multiple outgoing servers has caused my mail program to get stuck in sending emails. Thanks!

    The only way I was able to get my iPhone to check for mail automatically and actually download it was to delete the accounts and re-enter them. After they were re-entered, Mail worked automatically on my ISP mail account as it did before I updated, Push works on my .MAc account, and all my old messages appeared as well (i.e., deleting the accounts did not remove the messages I had stored).

  • Why doesn't the smtp (outgoing mail server) change on switch locations

    It would seem to me that when you choose Apple, locations and then select a new location, the Mail program should know that it should use the new smtp server.
    I have dsl from at&t or the old southwestern bell. They have blocked sending to any other smtp server on port 25 while I am at my home.
    I know how to switch them and recieve the prompt when it fails to select a different server. I know how to do this. However, other people who I have converted to the Apple platform, are displeased that it doesn't know to switch. This person is not technical and doesn't want to be technical.
    In their terms, they just want it to work.
    For right now, I told her to go into preferences, accounts within mail and to switch back and forth. I told her I would find a better solution.
    discussions.apple.com shows a lot of people complaining about outgoing mail but not a lot of solutions on switching back and forth.
    Anybody have any suggestions? I still think that when you switch the location, it should change your outbound smtp server.
    SWP

    You might want to take a look at Location X.

  • How do I change my password on the outgoing mail server?

    Getting a "Cannot Send Mail.  The user name or password for "SMTP:[email protected]@smtp.aol.com" is incorrect" and I can not send any mail messages.  The Outgoing mail server data is greyed out so I can not make changes.  What do I do?

    If you cannot access the SMTP server that way, then you need to remove the account from the phone and add it back again from scratch.

  • Photoshop Elements 5.0 PC.  Moved.  How do I change outgoing mail server? Photoshop trying to connect to old server for emailing pictures.  Thanks

    Photoshop Elements 5.0 PC.  Moved.  How do I change outgoing mail server? Photoshop trying to connect to old server for emailing pictures.  Thanks

    You say you have the pse 5 disk?
    I guess you do't have a dvd drive on your new windows 8 computer?
    Do you have access to another computer with a dvd drive?
    Anyway if you can find another computer with a dvd drive you could copy the pse 5 install disc to removable device like a camera card or flash drive.
    You can also buy cheap usb dvd drives.

  • Do I need to change my outgoing mail server when in another country?

    Do I need to change my outgoing mail server when I am in Bangkok rather than Canada?

    You may need to change the configuration of Mail to have the SMTP (outgoing) mail server provide authentication. Many email ISPs will not allow remote use of their servers without authentication. Check with your provider to find out what type of authentication they use. Start with Mail Preferences > Accounts > Account Information.
    Select "Edit SMTP Server List" from the dropdown menu.
    Select your server then:
    And configure the Advanced setion.

  • I have been abroad and had to change my outgoing mail server to send mail.i am back in the uk and want to reset it back to home settings.how can I do this

    I have been abroad and had to change my outgoing mail server.i am back in the uk and want to reset it.any ideas please

    Delete the account and setup the mail account again.

  • Changing Location and Outgoing mail server

    When I change Location, I need to change the Outgoing Mail Server (SMTP) (my ISP blocks mail traffic). Is there a way to make the smtp server different for each Location you have defined? Right now, I have to manually switch the Mail.app preferences each time I connect to a new Location, or wait for Mail.app to try to send the mail at which point it puts up a failure dialog where I can change the outgoing server for that message.
    thanks.
    MacBook   Mac OS X (10.4.9)  

    It would be nice to define an SMTP server for each account depending on the ISP being used for connecting to the internet and even better, the computer determining the ISP being used for connecting to the internet and automatically making the appropriate SMTP server change for each account but computers aren't quite there or that smart yet.
    There is a collection of AppleScripts called Mail Scripts you can download at this link.
    http://homepage.mac.com/aamann/Mail_Scripts.html
    The script to use from the collection of scripts is Change SMTP Server (Mail) which provides for switching between different already defined SMTP servers or define a new one. This is especially useful if you are using your computer in more than one location and have to switch servers for several accounts at once.
    At least this script makes it a little easier.

  • TS3899 outgoing mail will not send after I changed my password

    I changed my password for my mail account and now I can only receive email but cannot send.
    Any advice?

    did you change the password for you outgoing mail server too?

  • Changing default outgoing mail server

    I have been on online chat with my ISP trying to set up my email account. I want to use "Mail" v 1.3.11. I have sent a test email to my self. I have no problem. When i send out that same test message to other people like 8 people. I get the delivery failure message. how can change the defult settings. When i click the outgoing mail server it is different than what is listed in account settings under preferences.
    it ask to either "edit message" or change server if desired. well when i click on that tab there are no other choices. i believe i want to change from "smtpauth. to mail.nw. I just started this mail program so i dont have much time invested yet. But i want to get it going on . I have been Lycos acct for some time and I want to use my Mail that came wtih my Mac. so restarting mail for the first time wouldnot be abig deal. So how Do i do that if it is necessary.
    ed
    mini mac   Mac OS X (10.3.9)  
    mini mac   Mac OS X (10.3.9)  

    I get the"message delivery failed."
    the server "mail.nw.centurytel.net" did not recognize the folling recipients:"
    then it list the people that did nto get the message.
    "the server response was: 5.1.1 '<johndoe_isp.net>... User unknown
    "You can try to send using a different server. All messages will use this server until you quit or change your network settings."
    Here is where I think the problems lies.
    "send message using: ' smtpauth.centurytel.net' "
    I want to change that setting in the dialog box but it does not havr any other choices for me.
    Then at the bottom of the box there are choices
    "?" "edit message" "use selected server" "try again later"

  • How to change the primary outgoing mail server in iphone

    I am trying to change the primary outgoing mail server from Yahoo to another mail which is my internet provider. I do not know the steps to complete this in my iphone thanks

    If you have more than one email account on your phone, you can change the default account under Settings>Mail, Contacts, Calendar>Default Account. Note that this setting does not appear unless you have more than one account on your phone. So, you'll need to add the email account from your ISP under Settings>Mail, Contacts, Calendars>Add New Account if you have not already done so.

  • I need to change my password for outgoing mail server but it won't let me

    I Need to change my password for outgoing mail server on iPad 2 but it won't let me change it. I can't send out mail

    I assume that you mean that the setting is grayed out and that is what "it won't let me" means. Have you tried selecting another SMTP server of you have another one available in the settings?

  • IMail keeps changing outgoing mail server to one that is offline

    Since installing Lion, my outgoing mail server keeps changing to [email protected], which always shows up as offline.  I keep changing it to stmp.me.com:deannanel and check "use only this server" to get my mail sent.
    Next time I try to send mail, the outgoing server has changed back and mail cannot be sent.
    What is going on?

    IMAP is enabled at GoogleMail (Login with WebBrowser) and you have read the installation manual? Normaly it works fine, creating the Google Account with Internet accounts from system preferences.
    Like the incoming server, all outgoing server must have different usernames (your email addresses) and passwords. Check the correct assignment for each email account.

  • Mail can't change outgoing mail server

    Trying to change the outgoing mail server for email accounts (POP and IMAP) - the field in the Preferences -> Accounts panel is disabled. Disabled. Why? My ISP moved to new servers and I can't access email until I update the account preferences. What the ????

    Hello Andrew Macrae,
    Thanks for using Apple Support Communities.
    From your post I understand that you are trying to change your Mail account's outgoing mail server.  To do this, please follow the steps below where you are able to edit your outgoing server information.
    Choose Mail > Preferences, then click Accounts.
    Select an account.
    Click Account Information, then review the server being used for outgoing messages.
    If None is selected, click the Outgoing Mail Server pop-up menu, then choose a different server.
    Make sure the selected server is one specified by your account provider and that the server name is spelled correctly. Click the Outgoing Mail Server pop-up menu, choose Edit SMTP Server List, then review or enter information as directed by your provider.
    If you contact your provider about the server, use the form in this Apple Support article to record Mail settings you might need for configuring the server.
    Apple Support article: Mail settings you might need from your emal provider
    If the server is obsolete, click the Outgoing Mail Server pop-up menu, choose Edit SMTP Server List, select the server, then click Remove . Don’t remove a server that’s in use by an account unless you’re ready to add a different server for the account.
    Test your changes by sending yourself a message.
    Verify an account’s outgoing mail server - Mail Help
    Take care,
    Alex H.

  • Outlook 2007 - Outgoing mail server from a 3rd party

    I tried to set up the outgoing mail server for my Outlook 2007 with a 3rd party mail server. e.g. mail.xxxx.com, and I could not send the e-mail at all. If I set up the  outgoing mail server as outgoing.verizon.net, I can send the email to everyone else but not to this 3rd party mail server mail.xxxx.com. I received the undeliverable message from Verizon that the mail was rejected due to not being able to log on to this 3r party mail server. I am working for this company from home and it requires me to set up this for my outgoing mail server. Does anyone know how to fix this, including specifying what needs to be done at the 3rd party mail server to change to accept emails sent from outgoing.verizon.net? Thank you in advance. Andy

    Port 25 is the standard for SMTP, although some now use a submission port, 587. I know port 25 off network is blocked for residential users, I don't know if 587 is blocked off network because I have never tried it. I suspect it is. Verizon is by no means the only ISP to do this.
    Business accounts do not have blocked ports as far as I know, so if you have a business account, you are free to communicate using port 25 anywhere.
    Verizon has recently gone to non-standard port assignments for SMTP and POP servers. see
    http://www22.verizon.com/ResidentialHelp/FiOSInternet/Email/Setup+And+Use/QuestionsOne/124289.htm?CM...

Maybe you are looking for

  • Standard prg name

    hi , can any one tell me the standard program name for generating two invoices at a single payment. thanks karthik

  • Making a auto updating site map, index, RSS...problems

    I am new to web page design and need some help.  I am using DW CS4 on MAC OS X 10.4.11 and placing the page onto a remote simple host by my ISP (Telus in Alberta, Canada).  I have a very basic web page and can start again if needed.  My goal is to us

  • Velocity measurement from low resolution encoders

    Hi, I have 1024 pulse/1rotation encoders. I want to calculate or estimate angular velocity from this low resolution encoders. When I use dx/dt(derivative.vi)  there are high and low readings which obviously seem wrong to me.I want to have a more smoo

  • How to write extended ASCII characters to a file

    Here is a distilled fragment from some larger script. Its purpose is to create a text file containing some characters from the extended ASCII character set. $String = "Test" + [char]190 + [char]191 + [char]192 echo $String | out-file d:\test.txt -Enc

  • Create OSS Note for DDIC Change

    Hi Gurus, I am creating note to incorporate certain DDIC changes,when I am specifying correction instruction, the system asks for Corrective measure. Can any body help me in understanding what Corrective measures are & some documenents/tutorials wher