TS3899 The mail server "mobile.charter.mail" is not responding.
I can send mail, but cannot receive mail. I have been to Charter and AT&T, and neither can help. Have not accessed mail since 3/4/2014 from my iphone 5. I have deleted and added several times. Does not help. My son can access mail from his iPhone and our computer.
A12KWM wrote:
Thanks modular747 however this will still not bring up my email, even when i create my Gmail on Gmail template and my hotmail on the Outlook template... any thoughts?
Not clear what you mean by "bring up my email." If you have problems retrieving mail on multiple accounts, you have a problem in the phone or have no internet connection.
What basic troubleshooting steps have you tried (i.e. restart, reset, restore as described in the User Guide)?
What is the requirement to set up with SSL?
That is determined by your email servers. In the case of Yahoo and Gmail, do not deviate from the template settings.
Similar Messages
-
The mail could not be sent to the recipients because of the mail server failure.
Hi,
I am configured Database Mail,But i am getting below error while i am sending Test mail.
Message
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 4 (2014-03-10T15:54:11). Exception Message: Cannot send mails to mail server. (The SMTP server requires a secure connection or the client was
not authenticated. The server response was: 5.7.1 Client was not authenticated).
Pls help me,
Thanks - SelvaKumarSubramaniam.Please MARK AS ANSWER, if my answer is useful to U.Hi Selvaons,
I would suggest you contact your mail administrator for assistance. Here are some good articles regarding how to configure database mail in SQL Server for your reference, please see:
http://blog.sqlauthority.com/2008/08/23/sql-server-2008-configure-database-mail-send-email-from-sql-database/
http://www.codeproject.com/Articles/29060/SQL-SERVER-Configure-Database-Mail-Send-Email
http://www.sqlservercentral.com/blogs/databaseexpertisecom/2010/05/12/database-mail-set-up-in-sql-server-2008/
Regards,
Elvis Long
TechNet Community Support -
Interesting db mail issue. If i click send test mail from sql mgmt studio, it works fine, but when i execute a SP to send a mail, it fails. One thing I noticed is that the "LastModified" column in the mail log shows the domain account when a test
mail was sent from mgmt studio, but show "sa" when the SP was used to send mail.
This is from SQL 2012, did not see this in sql 2008, looks like 2008 always used the service account. any ideas ?
Get this error:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2013-04-30T16:36:52). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Client does not
Thanks.
RangaHi Ranga,
I also use SQL Server 2012. I send a test email through SQL Server Management and the last modified By “sa”.
If you used stored procedure to send a test email. Please use the command below:
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Adventure Works Administrator',
@recipients = '[email protected]',
@body = 'The stored procedure finished successfully.',
@subject = 'Automated Success Message' ;
I can both send test email through SQL Server Management Studio and SP. Make sure you have the right profile. Since you could send test mail via SQL Server Management Studio, please try again to send it via SP.
Thanks.
If you have any feedback on our support, please click
here.
Maggie Luo
TechNet Community Support -
Email works without pictures, but when attaching a picture the mail will not send
Hi,
In Mail > Preferences > Accounts to can find out which STMP server you are using for outgoing items.
This can be one account.
I do this with a dial Up account I still have access to.
I can "fetch" mail over DSL and now Fibre.
However I have to be Logged in via Dial up to actually use their Servers to Send.
As a Consequence I "send" via one of the other Accounts STMP servers. (I tend to add a signature that reflects this account change)
The other thing that might explain what you are seeing is the Full Name Box.
8:38 PM Monday; April 8, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
TS3899 The mail aplication isn't retriving or sending mail
The mail app in my Ipad stoped retriving or sending messages I keep resiving an error message teling that the imap.gmail or imap.aol in not responding,
I tried removing one of the account and setting it again but when setting it recived a message teling the ssl coudn't be set (in gmail)
I also restarted the ipad
Don't know what else to do.
SamueliOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
On my iPad I can see in mail only the headlines of the mails but not the text - why?
On my iPad I can see in mail only the headlines of the mails but not the text - why?
Try closing the Mail app completely and see if the text shows when you re-open the Mail app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot -
I do not remember Security and Privacy. Press the mail was not returned. What is it. Please check with the thanks.
<Email Edited by Host>Security questions:
https://discussions.apple.com/docs/DOC-4551
http://support.apple.com/kb/HT5312
I have asked the Hosts to edit your email address as it is not a good idea to publish that on a forum. -
Hi, I don't have sound on my MacBook Air and the Mail program never respond, please help me out!
Hi Mr. Shahid,
Thanks for visiting Apple Support Communities.
Start with the troubleshooting tips in this article if you don't hear sound from your MacBook Air:
OS X Mavericks: If you can’t hear sound from your speakers
http://support.apple.com/kb/PH13841
Best,
Jeremy -
I installed mavericks today and the mail will not open and just keeps on not responding how do I get it back I have force quit it a number of times now
Open the system menu via Alt+Space or click the Firefox icon on the title bar and see if you can resize that window.
If that works then close Firefox to save that setting.
See also http://kb.mozillazine.org/Resizing_oversize_window
Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
See http://kb.mozillazine.org/Corrupt_localstore.rdf -
Since upgarding to Lion I can not save e-mails to files.
I always get the message E-mail is not responding, Why is this?Since upgarding to Lion I can not save e-mails to files.
I always get the message E-mail is not responding, Why is this? -
Downloaded yosemite and mail application not responding? will not open can any one help?
downloaded yosemite and mail application not responding? will not open can any one help?
Restart the machine in Safe Mode and attempt to open each app. Also please explain exactly how you are attempting to open the apps. For example, "When I click the Safari icon on the Dock it bounces but does not open." To start in Safe Mode hold down the Shift key when you hear the startup tone unitl a progress bar appears.
-
Mail is not responding. Just a spinning rainbow wheel!
Hi can anyone help?
My mail is not responding, apart from the spinning wheel!
I have followed the instructions in this topic but cannot locate the following:
Users/Username/Library/Mail/Envelope Index
Any ideas - I am not a simpleton by any stretch and I have fixed this before, just running into problems this time!
ThanksHi Ella, and a warm welcome to the forums!
What else do you see in that Mail folder? -
We have a public SSL certificate that allows for Active Directory sync with LDAPS on port 636 with our email smart host. This was working fine and suddenly stopped working and we are now getting SChannel errors Event ID 36869. There were no changes made
to the Exchange server, the firewall or the DC which holds the certificate. I have run a new certreq from the DC and then re-keyed the public SSL certificate and re-installed 3 times but the error does not go away and AD Sync with the vendor
fails. When I run LDP.exe the connection on port 636 fails with "cannot open connection" and the system event log throws the S Channel event 36869 "The SSL server credential's certificate does
not have a private key information property attached to it" There is no software firewall set on the DC. When I run Certutil -VerifyStore MY it shows the current certificates as well as the revoked and expired certificates
correctly. Certificate 0 is the public cert and is listed with Server and Client authentication, the FQDN of the server is correct and "Certificate is Valid" is listed. The private cert is Certificate 1 and has server and client authentication, the
FQDN is correct, Private key is not exportable and it ends with Certificate is Valid. I do not see a point in re-keying the cert again until I figure out what the root of the problem is. I have read in some forums that the private cert should not be set to
expire after the public cert but that does not make a lot of sense when in a situation like this the private cert is of course newer than the public. In fact it is too early to renew the public cert. I have been troubleshooting this for a few days and at this
point I would have to drop my AD sync with the vendor to LDAP in order to add new users. I do not want to do that for obvious reasons and I do not want to have our spam filtering and email archive service running without Directory sync. Any help would be greatly
appreciated.Hi,
Have you tried this?
How to assign a private key to a new certificate after you use the Certificates snap-in to delete the original certificate in Internet Information Services
http://support.microsoft.com/kb/889651
Best Regards,
Amy -
The remote server returned an error: (404) Not Found.
Hi All
Now I try to deploy my SAP Portal Project it gives following error message "The remote server returned an error: (404) Not Found.". What is missing?
RegardsHi,
In order to check if those seetings are ok, do following:
Open internet explorer (or another) browser and go to
http://localhost:50000/irj
You should get the Portal homepage with login screen.
If you don't - then you have a problem with your local portal ( may be it is not running ).
If you do - Login with username: administrator and
password: abcd1234
If you don't succeed to login, then you have a problem with your user( may be it does not exist ).
Regards,
Rima. -
The Remote server returned an error (404) not found in SharePoint Client Context code
Hi All,
I am getting an error with below line.
"The Remote server returned an error (404) not found"
It occurs when I am trying to fetch some data from SharePoint 2010 List.
For eg. I have a webpart in which i am showing some content on page load and that content is coming from a List.
But I am getting error.
Screen shot for your reference.Here is my code:
ClientContext context1 = new ClientContext("site url");
context1.AuthenticationMode = ClientAuthenticationMode.Anonymous;
List list1 = context1.Web.Lists.GetByTitle("List1");
CamlQuery query1 = new CamlQuery();
query1.ViewXml = @"<Query><Query><OrderBy><FieldRef Name='Title' Ascending='True' /></OrderBy>
</Query></Query>";
Microsoft.SharePoint.Client.ListItemCollection listCollection1 = list1.GetItems(query1);
context1.Load(listCollection1);
context1.ExecuteQuery();
Even i removed the line no. 2 from above code and placed below but still same issue.
context1.Credentials = new NetworkCredential("user", "password", "domain");
Hope someone will solve my issue here. -
Hi,
I am unable to create a folder on FTP location via c# code.
I am getting the following error message:
The remote server returned an error: (530) Not logged in.
I have attached my code for your reference.
FtpWebRequest myFtpWebRequest = null;
myFtpWebRequest = (FtpWebRequest)FtpWebRequest.Create(new Uri(ftpfullpath + "/" + dirName));
myFtpWebRequest.Method = WebRequestMethods.Ftp.MakeDirectory;
myFtpWebRequest.UseBinary = true;
myFtpWebRequest.Credentials = new NetworkCredential(strUserNameFTP, strPasswordFTP);
FtpWebResponse response = (FtpWebResponse)myFtpWebRequest.GetResponse();
response.Close();
Note : value of ftpfullpath is "ftp://ftpxxxtest.com:21"Hi,
Still I am getting the error:
Exception 1 : The remote server returned an error: (502) Command not implemented
I am getting this error message when I tried to find Whether the folder exist on FTP location. I will attached the code for your review.
try
string ftpServerIP = "ftp://ftptestcon.sathiyajeba.com:21";
string strUserNameFTP = "dev_backup";
string strPasswordFTP = "india@2090";
string ftpfullpath = ftpServerIP ;
var request = (FtpWebRequest)WebRequest.Create(ftpfullpath + "/" + directory);
request.Credentials = new NetworkCredential(strUserNameFTP.Normalize(), strPasswordFTP.Normalize());
request.EnableSsl = true;
request.Method = WebRequestMethods.Ftp.GetDateTimestamp;
FtpWebResponse response = (FtpWebResponse)request.GetResponse();
return true;
catch (WebException ex)
WriteLog("Error on FtpDirectoryExists : " + ex.Message.ToString());
FtpWebResponse response = (FtpWebResponse)ex.Response;
if (response.StatusCode == FtpStatusCode.ActionNotTakenFileUnavailable)
WriteLog("Error on FtpDirectoryExists : Test-1");
return false;
else
WriteLog("Error on FtpDirectoryExists : Test-2");
return false;
Exception 2: The remote server returned an error: (530) Not logged in.
Getting this error message when I tried to create a folder on FTP location. Attached the source code for your review.
string ftpServerIP = "ftp://ftptestcon.sathiyajeba.com:21";
string strUserNameFTP = "dev_backup";
string strPasswordFTP = "india@2090";
string ftpfullpath = strServerFTP;
try
FtpWebRequest myFtpWebRequest = null;
myFtpWebRequest = (FtpWebRequest)FtpWebRequest.Create(new Uri(ftpfullpath + "/" + dirName));
myFtpWebRequest.Method = WebRequestMethods.Ftp.MakeDirectory;
myFtpWebRequest.UseBinary = true;
myFtpWebRequest.Credentials = new NetworkCredential(strUserNameFTP.Normalize(), strPasswordFTP.Normalize());
FtpWebResponse response = (FtpWebResponse)myFtpWebRequest.GetResponse();
response.Close();
return true;
catch (Exception ex)
WriteLog("Error on CreateDirectory : " + ex.Message.ToString());
return false;
Could you please any help me to resolve this exception?
Thanks,
Sathiya Jeba C
Maybe you are looking for
-
How do I open Appleworks 6.2.2 files in Windows 7?
I have recently acquired an Acer laptop (sorry) which runs Windows 7. I would like to work on files from my Apple iMac desktop where I use Appleworks 6.2.2 but I cant open any of the files. I am sure there is a simple solution bhut I dont know what i
-
Hi All - I sent an sms using my iphone 5 - It is PAYG and had no money in it. (stupidly) It tried to send as an SMS but gave the 'green button reject message'.(no money) Step 2 in this stupidity - the phone keeps trying to send the deleted text via S
-
Hello everybody, we have an custom archive system where we want to develop an HTTP SAP Archive Link Adapter. No problem so far, everything is described in the interface manual. But one thing is not clear enough: The HTTP Request "Create" could be rea
-
2.0 projects open in 1.5?
Well, I'm an AMD user who just found out I'm hosed with Encore 2.0. Luckily, I do have a Pentium system that I normally only use for editing. (It's got a Matrox RTX100,and they're just SO tempermental.) Both systems have removable drives. I normally
-
Hi , Can anybody please tell me under what conditions the changerun gets "terminated".Please advise.I checked with alternatives but still finding no reason for the termination. Thanks in advance, Madhavi.