TS3899 why, when the problems are linked to an ipad, do I need to download a document and fill it in? My ipad doesn't do that! What if my ipad is my computer?

why, when the problems are linked to an ipad, do I need to download a document and fill it in? My ipad doesn't do that! What if my ipad is my computer?
My mailing system won't work, and I see many here have had the same problem. so I tried the suggestions I could find. Last thing I tried was deleting my mailing account, so that I could restore it again. Internet is working, everything else is working, plenty of space BUT now my email won't even be restored. Not any of my other mailing accounts either for that matter.
Background information:
I use yahoo (the one I prefer by far), sometimes gmail, hotmail if I absolutely have to
My ipad is ipad 2, 1 year old
problem with the mailing system started less than a month ago
iåproblem was that it wouldnt refresh and find new mails, also took a long time sending mails

Create a iTune and App Store account without credit card
1. Go to App Store and select a free app
2. Tap INSTALL APP
3. Create New Apple ID
4. Confirm Your Country
5. Agree with Terms and Conditions
6. Fill in your Apple ID and Password (must be a valid email address)
7. Create and answer your secret question e.g. What is the name of my dog?
8. Select NONE for Payment Method
9. Fill in Billing Address i.e. your address
10. Submit application for new Apple ID
11. Wait for verification email
12. When email arrive, verify your account
13. Start downloading your free apps

Similar Messages

HT201269 My latest back up was on March 14th, 2013. My boyfriend has been using my Apple ID so we are linked on iCloud. Just recently we got each others contacts and now we get each others messages. Will that setting be changed if I switch phones without

Okay, so I cracked my iPhone 5 and just got a new 5s in the mail. I'm using the same number, sim and everything. My latest backup was on March 14th, 2013. My boyfriend uses my Apple ID for a year now but we just recently got each others contacts and now we receive each other's messages. Will we lose that setting if I don't back my phone up before switching new phones? Cause I didn't have that setting before when it was last backed up. If I could back it up I would but I don't have nearly enough storage so that's why I'm asking lol. We want to keep the setting like that so we still get each others contacts and everything

You can always resync the Contacts, Notes, and Messages by signing into those services with the same AppleID once you have the new phone set up.

I have a IPhone 5 and Iphone 5s. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone. Anyway to solve this problem?

I have a IPhone 5 and Iphone 5s, each phone is activited with a different service provider. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone. Hence you do not know exactly which line the caller called. If you answered using the wrong phone, then anyone calling the other number will not get through. Anyway to solve this problem?

Hey David Koh TP,
Thanks for the question. It sounds like your devices are set up to use continuity together. Specifically, it sounds like you are signed into the same Apple ID in FaceTime, and have iPhone Cellular Calls enabled. To resolve your issue, simply disable this setting:
Connect your iPhone, iPad, and iPod touch using Continuity
http://support.apple.com/kb/HT6337
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.
Thanks,
Matt M.

My iPod says "cannot be synced. The required file cannot be found. Always when half way through a sync. It also shows apple logo when I try to access photos and I think the issues are linked. Any ideas?

My iPod says "cannot be synced. The required file cannot be found" it also defaults to apple logo when I try to access photos. I think the issues are linked. Any ides?

So you have tried removing/trashing your iPod's photo cache? See here for more information on where to find this file.
iTunes: Understanding the iPod Photo Cache folder
B-rock

I have a new computer and my old drive has my UNSAVED bookmarks on it and I want to import them, how do I do it when the bookmarks are not SAVED?

I have a new computer and my old drive has my UNSAVED bookmarks on it and I want to import them, how do I do it when the bookmarks are not SAVED?

You can backup the bookmarks on the old computer and create a JSON or HTML backup and restore or import this file in the Bookmarks Manager (Bookmarks > Show All Bookmarks).
You can use an USB stick to transfer the saved bookmarks file to the new computer.<br />
You can also copy the places.sqlite file from that computer to have the bookmarks and the history.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

I can not open iPhoto. this is the messageShut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command ki get.

Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.

Before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

When I type a link to a page in my root directory in code view and I click on the link in live view it does not go to that page. But if I preview in a browser it works fine.

When I type a link to a page in my root directory in code view and I click on the link in live view it does nothing. When I then go to preview in a browser it works fine. Can anybody help?

I am not sure however I suspect live view is for viewing the page you are working on. You would have to open the other page to see it in live view. The browser on the other hand is doing what it is designed to do. I jump back and forth all the time from live view to the browsers I have installed.

How to stop PO output when the indicators are updated with a prog. **URGENT

Hi,
I have developed a update prg which will update the Final invoice indicator and Goods reciept indicator in SRM as well as in R/3 only for 'ORDERED' PO's. This was done using BBP_PO_PD_UPDATE FM. Everything is working fine, all the indicators are getting updated as expected both in SRM and R/3.
Only problem is that when the indicators are updated in SRM, PO Output is getting generated which should not happen.
Do you have any idea how to stop the OUTPUT.
This is very urgent.
BR,
Parvez.

PO output
PO Output problems
disable PO output on po change in SRM

I'm having trouble with installing a 8g kit in my late 2009 mac mini. when the parts are installed all i get is a beeping sound, is there any way to get around this?

i'm having trouble with installing a 8g kit in my late 2009 mac mini. when the parts are installed all i get is a beeping sound, is there any way to get around this?

What is the source & link to this 8 GB kit please?
Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/HT1547

It's not showing the play or next song buttons on locks screen when the musics are played

it's not showing the play or next song buttons on locks screen when the musics are played

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

How do I set up InDesign cross-document Text Anchor Hyperlinks so that when the files are moved, they remain active?

I’m combining several InDesign files into one PDF, with several hundred text links across the different sections, as well as within each. The cross-document (section) Text Anchor Hyperlinks work fine in my workspace - but when I change the file location, they are no longer active (other links, bookmarks remain intact).
How do I set up InDesign cross-document Text Anchor Hyperlinks so that when the files are moved, they remain active?

They seem to be a lot of extra work, and I don't see what the additional benefit is. I have several hundred links to do. I would appreciate learning what the benefit is, as I don't mind the extra effort if it will deliver the desired results.

How to reference a set of Flash-protected f4v files in a manifest when the files are on Cloudfront?

I have: a self-created AMS 5.0 running on Amazon.
Using latest OSMF player.
I'm Using EZDRM for Flash Access protection.
I have a dynamic bitrate f4m created with the F4F packager. It contains data for three bitrates.
I know that my S3 bucket and Cloudfront distribution are generally working because I can play a set of non-drm files using a RTMP-style manifest
I am successfully issuing the license and playing the videos using that manifest when the files are located on the AMS itself.
The working call to the manifest is this: http://media.blah.com/vod/BlahBlah/Blah.f4m
I think the relevant portion of the manifest is this:
streamId="Blah-1000"
url="Blah-1000"
bitrate="1000"
bootstrapInfoId="bootstrap4543"
drmAdditionalHeaderId="drmMetadata8495"
I think the correct way to approach this it to leave the manifest on AMS and manually change the url in the manifest for each video file
I've tried changing the url in the manifest to point to the cloudfront location
http://blahblah.cloudfront.net/cfx/st/mp4:Blah
But I simply get back: "We are unable to connect to the content you requested."
Your guidance greatly appreciated.
Ken Florian

Hi,
I created a project (JDeveloper) with local xsd-files and tried to delete and recreate them in the structure pane with references to a version on the application server. After reopening the project I deployed it successfully to the bpel server. The process is working fine, but in the structure pane there is no information about any of the xsds anymore and the payload in the variables there is an exception (problem building schema).
How does bpel know where to look for the xsd-files and how does the mapping still work?
This cannot be the way to do it correctly. Do I have a chance to rework an existing project or do I have to rebuild it from scratch in order to have all the references right?
Thanks for any clue.
Bette

Why is the print area on all envelope templates more than 1/2 an inch from the left side of the envelope.. ? Can this be fixed or changed.. ?

Why is the print area on all envelope templates more than 1/2 inch from the left side of the envelope.. ? Can this be fixed or changed.. ?
I have pages 09 version 4.1... It is a small aggravation.. The left 3 or 4 characters on the return address would not print until I realized that by clicking on
" View " & " Show Lay-Out " that it was out side the printable range ...

It seems to be a Pages template " Print range " issue.. Both the Epson and the HP printers were doing it and it was today that I realized why.. !!
When I move it to where it will print there is large gap on the left margin of the return address.. Just wondering if anyone else knew about this.. ? My Pages is ' 09 ' version 4.1...

My IPod Touch Stucks when the headphones are connected

Hi,
My Ipod Touch 2G (2.2) stucks after few minutes when the headphones are connected (genuines APPLE or genuines for Iphone + Mic).
When I listen the music, after few minutes the song stops and the apple appears on the screen.
Do you have an idea of what's wrong ?
Best regards

I think I fix the problem.
It wasn't besause of the headphones but the two small magnets there was on the cover of the leather case.
I removed them and the Ipod seems to work fine now ... I test again ...
Any other victims ?????

My iPad only has sound when the earphones are plugged in. The switch that controls the volume works then, but not when I take the earphones out. Suggestions?

My iPad2 only has sound when the earphones are plugged in. The volume switch works then too, but not when I take the earphones out. Suggestions?

it's a hardware issue
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more here
iphone stuck in headset mode

TS3899 why, when the problems are linked to an ipad, do I need to download a document and fill it in? My ipad doesn't do that! What if my ipad is my computer?

Similar Messages

Maybe you are looking for