TS3938 PowerPC applications are no longer supported
PowerPC applications are no longer supported
You can run Snow Leopard server in a virtual machine if you don't want to upgrade your applications.
Parallels
VirtualBox
VM Fusion
Snow Leopard server for use with the above. Call 1-800-692-7753 and order part number MC588Z/A. Cost is $19.99 + sales tax and shipping.
Similar Messages
-
TS3938 I can't print because PowerPC applications are no longer supported?
What has happened to my printer connection? I received the "you can't open the application 7100 Series Utility Launcher because PowerPC applications are no longer supported. I need help.
Your printer appears as compatible with OS X Lion and Mountain Lion, so there are newer drivers for your printer.
Make sure that your printer is turned on. Then, open System Preferences > Print & Fax, and press the + button to add the printer. Then, just choose your printer and it will be added. Do you see your printer?
Also, you can try installing the Lexmark drivers before doing that > http://support.apple.com/kb/DL1397 -
The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?
Scot Lee wrote:
The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?
Yes Rosetta has been gone for over two years. You can always search here for how Michael Lax's instructions on how to run SL Server in a virtul environment, but I don't think it is too kind to gamers.
Advice? Buy an old Mac that runs PPC software.
Cheers
Pete -
I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.
Use the Finder "Go" menu while holding down the option key to expose your User / Library folder.
Look in the Application Support folder for PACE items and delete them. -
When trying to setup my external hard drive, I get this box that pops up and says this:
You can’t open the application “LaCie Setup Assistant” because PowerPC applications are no longer supported.PowerPC was a type of processor used in Mac systems before Apple switched to Intel-based processors. These older chips required applications to be coded differently, to the extent that they will not run on the Intel processors in newer Macs. Apple used to include a translator that allowed these programs to at least run, but this translator is no longer available so if you run into an older PowerPC-based program then OS X will give you this error.
-
Can't install Final Cut Studio 2 because "PowerPC applications are no longer supported"
Bought a brand new 15" MacBookPro OS X 10.7 2.2Ghz Intel Core i7 and tried to install Final Cut Studio 2. Got the error message "You can't open the application FinalCutStudio.mpkg because PowerPC applications are no longer supported." Oh no, does this mean I have to spend more money!???
I'd like to provide an update on this situation in case anyone is in the same boat I am.
I went to the Apple store today. I asked if I could downgrade my operating system. They said no, since it came pre-installed with Lion. I asked if Final Cut Studio 3 was compatible with Lion. They said yes, for the most part. They said there was an issue exporting video in 1080p.
Of course, conveniently Apple is no longer selling FCS3 and the ones on Ebay I saw have gone up to more than $650 a copy. I am out $400 for stupidly buying FCS2 a few months ago, which is now useless to me. I told the Apple guy that I'm not buying FCS X until they work out all the kinks. This leaves me with this laptop that I bought for video editing with no editing software to use.
I never thought I'd say this, but I'm actually considering getting Premiere Pro now for Apple, which is supported in Lion and is running a deal for 50% off. (http://www.adobe.com/products/creativesuite/faq.html#lion-os) If Apple doesn't start selling FCS 3 again, they are really not giving me any choice but to switch! -
I installed Lion 10.7.4. Went to use Photoshop Cs and got a popup window. You can't open the application Adobe Photoshop CS because PowerPC applications are no longer supported. Is there a way of getting this to work or do I have to get newest version of all of my Power PC apps?
Welcome to Apple Communities
PowerPC applications are unsupported in newer versions. You can upgrade Photoshop or you can install Snow Leopard in a partition.
1. Open Disk Utility (Applications > Utilities) and select your drive
2. Go to Partitions tab, press + button, create a new partition and press Apply
3. Insert the Snow Leopard install DVD and reboot pressing C key
4. Install it in the new partition
5. If you want to change boot, go to System Preferences > Startup Disk and select 10.7 -
Shortly after upgrading to version 10.7, I installed an application that was not compatable with the LION operating system. The application was for an external Maxtor hard drive that appearantly was intened for an earlier Mac operating system.
Now I get the popup "You can't open the application NotificationExec because PowerPC applications are no longer supported" about every 10 seconds.
How to I get rid of this.
There is nothing to Force Quit. The process (if it is a process) does not show up in Activity Monitor. I have also tried to use the KILLALL command but no process is found by that name.Absolutely frustrated by the same problem, just lost 3 hours of my day trying to uninstall after getting the same error message. The ONLY thing that worked for me was going to the following Maxtor (Seagate) URL:
http://knowledge.seagate.com/articles/en_US/FAQ/199931en
I downloaded their "remove maxtor sw.zip" file
Click here to download the remove_maxtor_sw.zip file and store it on your system's desktop.
And it worked perfectly. Took 10 seconds and - after restarting - it was done.
What a waste of the day!!! -
Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreekI am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline. -
So I've been trying to open some Microsoft Word Documents and it says it can't be opened because PowerPC applications are no longer supported. What do I do about this?
Workarounds:
1. Restore the OS X that you formerly used to run Word 2004;
2. Partition your hard drive or attach an external hard drive and install Snow Leopard (and Rosetta) so that you can "dual-boot" into Microsoft Word 2004;
3. Upgrade to Word 2011 or use an alternative program; or
4. The solution I use: Install Snow Leopard (and Rosetta) into Parallels 7 or 8:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439 -
I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?
I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say it would install to Applications, but it's not there. How do I find it and can I put it in my dock?
In Safari's preferences:
Look in the folder displayed where you see the arrow. The actual Downloads folder is found in your Home (user) folder. -
I just installed Photoshop Elements that is supposed to be for Mac. The message appeared that said, ""You can't open the application Photoshop Elements 2.0 because PowerPC applications are no longer supported." I have a Mac OS X, Version 10.8.5,
Have a look here:
https://www.google.com/search?q=%22You+can%27t+open+the+application+Photoshop+Elements+2.0 +because+PowerPC+applications+… -
I'm trying to install CS2 on a mac OS X version 10.9.4. When I try to open the installer file I get a message "You can't open the application Adobe Installer because PowerPC applications are no longer supported. Does anyone know what I should do?
It means what it says - it's not compatible with modern Macs. You need to buy a current version.
Mylenium -
I just upgraded to OS X Lion and now I can't open the application Adobe ImageReady CS because PowerPC applications are no longer supported. Is there anything I can do to fix this?
There is no fix. It simply means that the software is outdated. Adobe would need to release a newer non-PPC version that supports Lion. They may have done that already, I don't know.
Maybe you are looking for
-
How do I delete a file from my USB Stick
I have a new MacBook Pro with retina display. I have just put in my USB flash drive which contains some movies (MP4 format). I am unable to even move the files to the trash. When I "double click" I only get options to open/ create alias etc When I ho
-
Accessing Jar resource issue (in Junit test)
Hi, I have a package called my.test.example containing one class called Example1.class and a property file called MyProp.properties. I am trying to load the content of MyProp.properties with the following: static { Properties Configuration = new
-
TS3367 When I FaceTime other people it says connecting but then it says FaceTime failed. Why??
When I FaceTime other people it says connecting then face time failed. Why??
-
Need help with iPhone VPN non-ASA
I am a network hobbiest. I am trying to set up my home router so my family can VPN to the house with our iphnones and ipads. I have tried to figure this out several times on my own and and for some reason I can not get the policies to match. At this
-
HP Photosmart eStation printer (CQ140B) that one i have i bought it 2 weeks ago and everything went good untill today i want to scan someting but my estation or tablad wont turn on wen i press the button to turn him on he will go on but then de disp