TS3988 i cannot get anything to send from my outbox
I cannot get the email to send with the new program
If you mean on your iPad and this is an iCloud email account, try going to Settings>iCloud, turning Mail off (which will temporarily remove the account from your iPad), then after a minute or so turn Mail back on (to add the account back). Then try sending again.
Similar Messages
-
All of my Apple product have suddenly been unable to find my HP printer. All are working/connected to wifi and were printing just fine yesterday. Suggestions?
Hello Faith25
Check out the articles below to get your notebook and iOS devices to print again. Check to see if there is anything that could be preventing it from being print to like a jam in the printer or a print queue that may be stuck. Another think to check, if you can get it to show up on your notebook. is to see if the printer has the latest firmware.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
AirPrint Basics
http://support.apple.com/kb/ht4356
Regards,
-Norm G. -
When I ask it to print either from a webpage or using the File Print command I get a message that says An unknown printer error has occurred. I was not getting it before the latest update. When I use Internet Explorer on the same site, it works fine.
You can read this article to see if it helps:
http://kb.mozillazine.org/Problems_printing_web_pages -
I cannot get mail or send email on my I pad message says username or password for imap.gmail is incorrect
Be sure you use Google's settings from:
https://support.google.com/mail/troubleshooter/1668960?hl=en&ref_topic=1669040#t s=1665018
The key is to be sure you have enabled IMAP on your GMAIL account. Follow the instrunctions on that link. Then be sure to check the Advanced settings from:
https://support.google.com/mail/answer/78892?hl=en -
I can't get anything to print from my ipad mini since I did the software update. It recognizes the printer, but nothing happens when I tap print. Can anyone help with this situation? Thanks!
Hi Justinescc,
The bottom of this article contains some steps you can try if you're unable to AirPrint:
AirPrint Basics
http://support.apple.com/kb/HT4356
Cheers,
- Ari -
FRM-47007: Cannot get parameter WUC_DATA attributes from Parameter List: in
Hi,
I am pretty sure this is a webutil message. I am running 10g through OC4J, all was working well one minute then on startup of the form I get these 2 message 4 or 5 times:-
FRM-47007: Cannot get parameter WUC_DATA attributes from Parameter List: invalid list ID.
followed by:
FRM-47007: Cannot get parameter WUC_DATA_MULTIPART attributes from Parameter List: invalid list ID.
These 2 message are repeated 4 or 5 times then things appear to run fine, I can open and read files, transfer them etc. The only thing I can think I have done differently is add a bean to a data block but when I remove the bean and restart the OC4J I still get the messages.
Any ideas?Fixed,
I dropped the WEBUTIL object group then added it again by adding the object library then subclassing it to the object group. The error messages are gone.
Cheers -
After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells me how to start the installation. Clicking "open with Auto play" gives me irrelevant options, view photos, share, etc. I'm running Windows 8. This program has worked, although buggy, for the past year.
reinstall by clicking setup on your disk or downloading and installing,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I have an iPad 2 and cannot get it to print from our p photosmart 6525 printer. Does anyone know how to get the AirPrint to work between these two machines?
Hi,
As soon as the devices connected to your network the printer should appear as AirPrint.
You may ensure it is connected by clicking the wireless icon on the printer screen to locate its IP, then type the IP into Safari and check if you can access the printer homepage from your iPad.
If the printer conncted but still not being detected as AirPrint, ensure you have the latest firmware for your printer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03312867&cc=us&dlc=en&lc=en &product=5271613&tmp_track_link=ot_search
If the printer still not being dedected I would rather suspect the network as AirPrint uses Apple Bonjour and therefore require your network to support multicasting to operate..
You may test it by temporary setting direct connection using Wireless Direct, if the printer being detected without using the router please clarify your router brand and model to better understand your router capabiities.
The steps to enable Wireless Direct can be found listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03351623&cc=us&dlc=en&lc=en &product=5271613&tmp_track_link=ot_search
Shlomi -
I cannot get anything to play the who thing. What can i do?
When i load anything on you tube, the video stops after a second. I cannot I cannot get anything to play the who thing. What can i do?
I'm sorry but what is a who thing?
If you are just having problems getting youtube to play on your phone, I would start with shutting down all the apps sitting in the multitask tray, then I would do a reset, and if that doesn't work I would do a network settings reset.
If you are having problems runnig Youtube over your own wifi network, I would throw in a router restart and see if that helps. -
I have updated to Mac OS X v10.6.7 and STILL cannot get video into iMovie from Sony HDR SR11 :-( PLEASE HELP ME ...
* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
HT1212 "iphone is disabled, connect to itunes". I cannot get anything to work. Help!
I have tried to restore my iphone and nothing works! It starts the process for about 15 minutes then the phone goes back to the message "iphone is disabled, connect to itunes". I cannot get anything to work. Help! I am so frustrated with our iphones, that I am ready to switch to different phones for my entire family. Please help!!!
Did you check your security software settings, to make sure iTunes can contact Apple servers during the restore process?
iTunes: Troubleshooting security software issues -
my ipad is just showing the itunes logo and a apple connection wire, wot to do, i cannot get anything else on my ipad. i was transferring photos to my computer when the ipad ran out of charge. please help.
Sounds like it's gone into recovery mode : http://support.apple.com/kb/ht1808
You will need to reset it via your computer's iTunes and you should then be able to restore/resync your content to it. -
My emails will not send from my outbox in my apple email. How do I fix this issue?
My emails will not send from my outbox in my apple email. How do I fix this issue?
What message do you have?
Do your outgoing SMTP servers are online or offline (Mail > Preferences > Accounts > select account and check under Outgoing Mail Server) -
Tried everything but cannot get Mail to send on one account
I know this is a wide reaching subject and I've been trawling all the web for a solution for past 48hrs and have tried everything but still cant get mail to send or connect to SMTP server for one set of accounts!!!
I am running Lion on iMac and it's fully up to date. I am using Mail for iCloud a/c, some hotmail a/c's and a Company domain with various email accounts, this is the problem one. I cannot for the life of me get the Comapny accounts to send mail, the same accounts are on iPad and Iphone and working fine but on Mail - no chance. I have:
deleted accounts and set up again
tried POP and IMAP
Tried different ports
tried different securitity levels
Deleted .plist file
Removed passwords from keychain
deleted all assocoiated Mail files to create "fresh" app
repaired disk permissions
Deleted again and reset again - over and over
Used a friends MBP and accounts worked fine!!
What is going on? I shut iMac down as I was on holiday for 2 weeks, when I got home booted up and thats when the issues started, nothing changed at all in terms of iMac settings, internet etc etc. VERY WEIRD! Especially as seems fine on iPhone & iPad.
Would appreciate any help but please note I have tried all the basic type repairs as listed.Hi Glenn's
I am in the UK and had a similar problem. Ii eventually found the problem was due to my BT Home Hub Router. Not sure where you live, but of you are in the UK, this might work for you.
I found this fix below on https://discussions.apple.com/thread/4604180?start=15&tstart=0
It worked for me. If you can't link to the URL, here is the body of the text
There's an issue related to the BT homehub that is providing a hostname that is "syntactically incorrect" for several smtp server.
Here's how you can fix it.
Using your internet browser, go to the address "192.168.1.254
- Follow instructions to reset your password if asked.
- Then go to "Settings", then "Advanced Settings" and "home network"
You will see there all the devices that are connected or that has been connected before. It's gonna be easyer if yout computer is the only one connected.
Your computer should have a name like "unknown-xx:xx:xx:xx:xx ...
Click on this name, chose another name without any special characters, like "macbook" for exemple.
And then click on "apply"
- restart your computer.
That should fix the issue.
Credit goes to vincentfromcork for providing me with the solution.
Hope it works for you. If it does, spread the word ;-) -
Cannot get printer function back from copy function
On several occasions my printer switches to a function other tha "print" and I cannot get the print function back. It seems like it should be a simple task but I have tried everything including turning it off and on. The computer data indicates that the proper printer is chosen. Thanks
Hello @jbg1946,
Welcome to the HP Support Forums!
I understand that occasionally you are not able to print from your Windows Vista computer to your HP PSC 2510 Photosmart All-in-One Printer. I would like to assist you today with resolving this issue. Now, you indicate in your post that your machine seems to switch functions. This is quite unusual as your printer should only perform the tasks that was asked of it. When you send the print command, your printer should print. When you select Copy on the front panel of your printer, your machine should Copy. When you want to scan and and select the Scan button, your machine should scan. If you're selecting the print button on the computer, but the printer fails to print, this would indicate a potential hardware on the printer or a software/driver issue on the computer, rather than a switch of functions.
To start troubleshooting I am going to have you download and run the HP Print and Scan Doctor Tool. This Tool will run on your computer and 'fix printing' issues for you. Should any driver, software, or connection conflicts be found than the HP Print and Scan Doctor Tool will attempt to resolve those conflicts for you.
Please click here to download the HP Print and Scan Doctor Tool. Once the website opens select the Download button on the top left. If prompted, please allow the download to Run. Once the download is complete follow the onscreen prompts to 'fix printing'. Once the HP Print and Scan Doctor Tool has completed, please test printing again.
Should the issue persist, please let me know if you ever get any error messages either on the computer or on the printer when you try to print and it fails.
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!
Maybe you are looking for
-
Bom dia. Necessito fazer duas integração (no Xi e no PI) com as seguintes configurações: <-----(RFC) - <---(WS)---> integração no cliente A. <-----(RFC) - <---(WS)---> integração no cliente B. Sendo que a RFC é a mesma nos dois clientes e o também.
-
I was hoping that someone could shed some light on why one layout manage will allow an applet to be inserted in a class that extends JFrame but not another. Here is the guts of the problem I have an class that extends applet to display a pie chart. I
-
Hello Friends, i have this problem in Bex Message Class: RSBOLAP Message No. 014 " Transformer exception while transforming BEx Web templates". Log defaulttrace "A message was generated: ERROR Transformer exception while transforming BEx Web template
-
How to do Default context value For DFF in OAF
Dear all, I want to do Default context value For DFF in OAF for seeded page, pls let me know how to do. Regards, Hanimi
-
Glow.aex cannot be loaded. How do I fix?
Whenever I apply Glow to an adjustment layer, a popup up says "After Effects Error: plug-in "Glow.aex" could not be loaded", although it is in my effects and presets. I have provided screenshots to further explain my problem.