TS3988 I changed my account information but my iCloud email did not change and it will not let me change it on my ipad or phone
I changed my email and password on my apple account. But iCloud won't change the information and will not allow me to make the change
To change the iCloud ID on your iOS devices, go to Settings>iCloud, tap Delete Account, then sign back in with the new ID. This deletes the account and your iCloud data from your device, but not from iCloud. Provided you are signing back into the same account, your data will reappear on your device when you sign back in.
To avoid losing photo stream photos, save these to your camera roll (if not already there) before deleting the account (tap Edit, tap the photos, tap Share, tap Save to Camera Roll).
Similar Messages
-
How do I change my icloud apple id if I do not remember the password and it is not my current apple id and also the email that is the icloud id no longer exits.
Try Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team... -
EVERYTIME I TRY TO USE FIREFOX IT CLOSES IMMEDIATELY. I TRIED TO UNINSTALL IT BUT IT WILL NOT UNINSTALL. WHEN I TRIED TO RE DOWNLOAD IT AND RUN FIREFOX 4.0 IT WONT DO IT CAUSE IT SAYS ITS STILL TRYING TO DELETE THE OLD ONE AND KEEPS RESTARTING MY COMPUTER WITHOUT DELETING IT OR INSTALLING THE NEW ONE.
I would expect wording related to connection, but see
http://kb.mozillazine.org/Firewalls -
Had problems with os and now can not open firefox unless I run as admin. Error appears - Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard drive is not full or close to full. It is recommended that you exit the browser and fix the problem. If you continue to use this browser session, you might see incorrect browser behaviour when accessing security features.
I have tried deleting the cert8 db file but it is not recreated when I start firefox again. HD has lots of room. Can you suggest anything else to try please?
thanks, mandiIf deleting or otherwise removing the cert8.db and secmod.db file doesn't help then try a new profile.
*https://support.mozilla.org/kb/Could+not+initialize+the+browser+security+component
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
I am unable to send emails on my imac and macbook. They go straight to my outbox. The connection doctor comes up with green lights. Any ideas? Hopeing someone out there can help me - thank you.
EA68, who is your broadband provider, if it is Sky then they have recently merged with Yahoo, and there have been similar problems with people who use Mail to access their emails.
If this is the case you will need to remove your SKY account from Mail and then set it up again.
Make sure you clear your inbox, and back up any important emails you have.
IN MAIL go to prefrences and accounts. Highlight SKY account and select the MINUS or delete sign.
Now select the PLUS or add button and type in your sky email address, and then your sky password. Follow on screen instructions, and your emails should then work.
Hope this solves your problem. -
FF shows that it is loaded but the website will not come onto the screen. When I put the mouse on the icon, the website is there, apparently to be opened. I click on it, screen flickers and nothing but still showing on icon. I right click, select maximum, and nothing. I was on 3.6.15, upgraded to 3.6.16 and not to 3.4. They are all doing the same thing. I uninstalled FF and reinstalled. Still nothing.
OK, I found a way to do this. Might not be the best way, but it turns out that I can put a addEventListener(MouseEvent.MOUSE_UP, gottaMouseUp) in the calling class, add a public variable in the button class that lets me know if the correct button has been clicked, and use that in the calling class to decide which button was clicked. I knew it was something simple like that....
-
ssafari quit unexpectedly I keep pressing reopen button but nothing. Bt told me to put imac into safe mode, could this be the problem.
Eustace
Thank you so much for replying. However I was about to remove this post. I worked out how to do it!
If anyone is having similar issues then turn off mirroring and change the arrangement in display preferences so that the monitor works as the main display and the macbook just shows the desktop. I then turned down the brightness levels on the macbook to conserve power.
Feel very proud of myself, but thank you!
S -
I can't download any apps now.
Try going to the bottom of the Featured tab in the App Store app on your iPhone and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section.
-
I might donate, but now you are tracking my use and I will not donate.
I'm very unhappy that you are now tracking my internet use. I do not want you to presume that you can improve my "experience". Just let me have efficient use of the internet. I have assumed, wrongly it appears, that an open source organization would not resort to tracking my use. Isn't this against the principle of the open source community, to use my information without my knowledge and out of my control. Please stop tracking my internet use.
The things you can disable aren't tracking your usage, they are tracking things like how Firefox runs (performance, crashes, etc.) and stuff like settings and add-ons. This helps us know how users are using Firefox so we can improve the experience for all users. We do not track the websites you visit or what you see on the internet.
-
I have my stepper driver connected to the +step and aogrnd terminals on the UMI-7764. With the driver connected to these terminals the output across the two is 2vp. When I disconnect the driver, the level returns to a 5vp signal. My drivers inputs are optically isolated so I suspect the impedance my be higher than TTL can drive. Is there any way to manually set the output parameters of the 7330 Motion controller?
Thx...VicHi Vic,
Take a look at this KnowledgeBase: How Do I get the 73xx Controller and UMI-7764 to Drive a Third Party Stepper Motor?
I think it may have the solution to your problem. Also, here is another KnowledgeBase that is relavent:
Why Do I have to Supply Power to my UMI-7764?
I don't believe there is a way to manually set the output parameters of the 7330, but I don't think this is the source of the problem. If the KnowledgeBase articles are not the solution, post back and we'll keep troubleshooting!
Kristen H. -
Not sure what happened. I used to be able to go to a site and then click a link within that site and it would open. Now it won't, I added it to pop-page and still nothing
so i am in blogger and try to "add a gndget" and the link will not open
i was in myprofitbuilder.com and tried to open a banner code and won't open
I had to go to my other computer to use Internet Explorer
ThanksCustomer Care takes care of activation problems. Contact Customer Care
-
IPOD touch is disabled. Device will not allow me to enter a passcode or restore device through Itunes.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Im trying to update WFi on my ipod but when i slect settings and try to enter, WI FI is not bold and therefore will not allow selection. What am I missing?
Try the suggestions found here: http://support.apple.com/kb/ts1559
-
I hav tried your way of editing the account information, but my billing is not editing , I want to change my card no. but I am not able to do that,would you please assist me,I hav tried the above described methods
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
i need to change my account information so my devices will sync together, however i do not have my email my ipod account is linked to and i dont remeber the password. In short i need to remove my ipod from my old itunes account but i cant log on to that old account. What can i do?
You'll need to reset the password that account then before you can transfer these purchases to your iTunes library and your iPhone.
https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot
If that doesn't work, you'll need to contact Apple support directly by phone and have them walk you through resetting the account information.
B-rock
Maybe you are looking for
-
How do you remove recipients from the To list?
Say you want to send an email to multiple recipients. You add a few recipients to the To list but then change your mind about including one of them. How do you remove one from the list? So far the only way I can see is go cancel the whole message and
-
ANSI Z535.1 Safety Colors in Frame
Frame 7.1 Solaris (Frame 9 Win7 available). Although the manuals I work on are print-published only in grayscale (600 dpi bitmap, actually), we make them available on the web as PDFs (which could be in color). At some point in the future, we may publ
-
Changing the Background server information of mulitple process chains
Hello Friends, I am looking for a program or any other way by which I can modify the Background server information of mulitple process chains at once. I am not really sure whether we have any such programs. Any help would be highly appreciated. Thank
-
Does version 3.6 still have the plugin-container.exe?
Plugin-container.exe causes me massive problems with hangs, crashes, cpu usage in the 90-100% range and it seems to force the cooling fan to run at maximum constantly. It makes the computer useless as anything other than an extremely noisy paperweigh
-
Can't find the Organize Bookmarks function since upgrading to 4
Just upgraded to Firefox 4 and find there is no "Organize Bookmarks" function under "Bookmarks" anymore.