TS3988 I get a "Connection Error - iCloud encountered an error while trying to connect to the server" message; I have been getting this error message for months, on any device I try to login with.

I get a "Connection Error - iCloud encountered an error while trying to connect to the server" message; I have been getting this error message for months, on any device I try to login with.

Hi
I am sorry can't help you because I have same problem when login to icloude.com and try insert to Contacts!
Many times happen.
what is issues ?

Similar Messages

Powerview Cannot connect to the server due to a security issue. The server may not have been able to match the host for silverlight

Hello,
I have a sharepoint 2010 sp1 CU Dec 2011 server with a SQL Server 2012 SP1 CU4 reporting services instance. I am able to open Power View and use it normally when bypassing the ISA Reverse Proxy server. However when going thru ISA I receive the
following Error.
Power View Cannot connect to the server due to a security issue. The server may not have been able to match the host for Silverlight. This error appears after I click yes on an Internet Explorer Display Mixed Mode prompt.
I've seen a couple references to this issue but not much. This one mentions a clientaccesspolicy.xml file but I haven't had any luck with that. http://connect.microsoft.com/SQLServer/feedback/details/716433/cannot-connect-to-the-server-due-to-a-security-issue-the-server-may-not-have-been-able-to-match-the-host-for-silverlight
Any Ideas? Thanks.
Ryan

Hi Ryan,
Based on my research, the issue should occur due to a by design behavior in Threat Management Gateway (TMG). To work around this issue, you can use SSL between the TMG and the SharePoint Web Server.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

A connection timeout occurred. I have been receiving this error when trying to connect to the open wifi connection at my university. My wifi works perfect when I am using it on my home network. I have tried all the suggestions in forums online no luck.

I am getting a connection timeout occurred message on my mid-2009 macbook pro I am running mountain lion 10.8.2 but problem occured before and after update. The message only happens when i attempt to connect to the wifi at my university. It works normal at my home. This error just started last semester out the blue. I have read many forums and non have helped ive reset my pram a few times, ive deleted all my networks including my home network out of my system preferences<network and all that extra stuff. if anyone has a clue please help me because one of my classes requires me to take in class test over the internet. Thanks for reading. If anyone can help PLEASE help ive been trying to fix for last few months.

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
Assuming that you've ruled out those possibilities, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

Since updating to the new iTunes, I have been getting this error message while trying to sign in to iTunes. "We could not complete your iTunes store request. An unknown error occurred (-50)." HELP PLEASE

Is anyone else receiving this error message, "We could not complete your iTunes store request. An unknown error occurred (-50)."? Please Help

Try Here > http://support.apple.com/kb/TS1583
And See this Discussion...
https://discussions.apple.com/thread/4204776?start=0&tstart=0

Itunes wont download properly and i have tried multiple things and im still getting the error message i have been getting all day long can somebody please help me!

why is apple so dumb and why is their software this bad to where i cant simply download a new version of itunes someone please help me figure this out i have been struggling with this for the past week now and its making me angry

HI Patty ..
Disable your anti virus software then download iTunes.

While trying to down load the current update to Itunes i get the message "Older version of Bonjour can not be removed" and Itunes gets interrupted and wont finish update. Can someone help with this??\

while trying to install latest itunes version i get this message "Older version of Bonjour can not be removed" and the download gets interrupted and doesnt finish. Can someone help?????

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

What is the "Internet sharing disabled" message I have been getting the past two weeks?

I have never had this before. I disable the app but it keeps returning. I don't notice it actually affects anything, it is just annoying to get this message several times a day. I can't find any way to disable this or turn if off.

ginalynn,
Thank you for reaching out to us. I am sorry that you have been having issues with your device recently. What it sounds like is that you have your Mobile Hotspot enabled. When you pull down your top bar do you see anything referring to that? To check you can also go to settings>data>mobile hotspot. Make sure that is turned off. If not does it say anything else when the message pops us. Please fill us in.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport

I can not get my new Nikon D 810 raw file to load into Lightroom. I have been doing this same thing for over a year using a Nikon D800.

when I go to add my raw files like I always have it said that it can not read these raw files. I called Nikon an was told that the raw files in the D810 are the same as the D800. Something is up.

Re: D810/Lightroom5 importing Raw files
The raw files are not the same as the D810 has a different sensor than the D800. The file layout might be the same but that doesn't mean any software that supports the D800 will support the D810. Adobe has to profile the new camera and add calibration profiles and then release an update to Lightroom. ACR 8.6 RC supports the D810, so LR 5.6 will probably support the D810 too. For now, you could convert the nef files to dng using the dng converter that comes with ACR 8.6: Adobe Photoshop Camera Raw 8.6 RC for CC and CC 2014 Release Candidate | digital camera raw file support - Adobe Labs

Since the firefox update i have been getting spam pop up windows

New windows keep popping up with money scams since the new update of firefox. I am working on an imac and have never had pop up windows before.

Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
"Something is wrong
We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
Same message if I cut and paste the link.

My ringer does not work on my phone (not sure what happened, didn't smash it, nor did it fall to the ground), and I have been on silent/vibrate mode for a few months now. Unfortunately I am unable to listen to music without headphones, or get on speaker.

I can hear sounds when I plug in to headphones or on bluetooth (streaming audio from my car).
Can anyone help?
I have the iphone 4s.
Thank you!

Hey Chris,
Unfortunately the ringer does not work - which causes the speaker to not work when it's switched on to ring mode, unless I'm on bluetooth. It has recently stopped working and I've had this phone for 2 years.

I have an iPhone 5 and I can send text messages but have been getting complaints when people have said they text me but I don't text back, I don't seem to recieve all my text messages ? Who should I phone to ask for help or could someone help me please?

Please will someone help me decide what I should do ? Should I phone my provider or go in to the shop?

http://support.apple.com/kb/ts2755
if the above link doesn't work, then contact your phone carrier as SMS is a carrier feature.

My phone is frozen in an app. I cant even shut it off or see any text messages I have been getting. What do I do?

I need help!!

Have you tried holding the power and volume down buttons simultaneously for 15-30 seconds to see if the phone reboots? Or if your phone has a removable battery, have you tried removing it, waiting a few minutes, then reinstalling and see if the phone turns back on?

An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.

Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.

Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS)

How to recover when Delta Queues have been emptied by error ?

Hi All,
Here is our problem : the ECC Delta Qs have been emptied by error some days ago, and for the moment we have frozen every BW updates from ECC, but the Delta Queues have been being filled in ECC since that.
We have so smart ideas so far...
Thx 2 all in advance

Hello ThoLei ,
In case your normal delta is running file in BW and the only thing you are concerned about is the data missed during the day when the queue got deleted, then yes you can go ahead with Repair Full option. If you refresh the missing data and no need to worry about delta.
Regards,
Pratap Sone

While i sync my iphone 4 with itunes 10.5 ,it removes the new applications i have been installed on my phone!

while i sync my iphone 4 with itunes 10.5 ,it removes the new applications i have been installed on my phone!
please help my to sync my new applications with my PC

Unfortunately just saying "OSX" isn't enough in this case because it applies to 10 different system versions.. You have to have at least OSX 10.6 (Snow Leopard).

TS3988 I get a "Connection Error - iCloud encountered an error while trying to connect to the server" message; I have been getting this error message for months, on any device I try to login with.

Similar Messages

Maybe you are looking for