TS3988 icloud.exe does not load from the installer onto my windows 7 laptop

Installed the iCloudSetup from Apple. Installer said everything installed and finished. When I go to open iCloud, the laptop is looking for the iCloud.exe file and after a few minutes, it notifies me that it cannot find the original .exe file.
I am thinking of re-loading the installer file again and starting over.
Any other suggestions?
Thanks!!

There is an app you can download for xp, i havnt tried it because im not going to use icloud but if you go onto the ipad tab and then icloud there is a link on there.

Similar Messages

Setup.exe does not wait until the installation is done

Hi,
I downloaded ODAC 10.2.0.2.21 from here:
http://download.oracle.com/otn/other/ole-oo4o/ODAC1020221.exe
And after extracting all files, I use this command on cmd:
setup.exe -silent -noconsole -waitforcompletion -force -responsefile <Path>
Furthermore, I have BOOTSTRAP=FALSE on oraparam.ini but setup.exe does not wait until the installation is done.
I only want a way to wait for the installation to complete...
Cheers,
Joan

DBMS Direct wrote:
What's the main reason you want to do a silent install for ODAC?To launch it from a bigger installer of an application which uses ODAC.

My iCloud is set up and seems to work. However, a newly added contact does not sync from the Macbook to the iphone and iPad. What am I doing wrong?

My iCloud is set up and seems to work. However, a newly added contact does not sync from the Macbook to the iphone and iPad. What am I doing wrong? Thanks, txstan

Apparantly it is, On My Mac contacts don't appear in iCloud, anywhere.
Put all your contacts on all of your devices in iCloud (assuming that's where you want them to be)
Go to www.icloud.com, login and see what you actually have in the account.

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I'm sorry no-one has answered you yet - I'm afraid I don't know the answer to the question: but I wanted to put into your mind that starting up with AppleWorks at this stage isn't a good idea. The program was 'end-of-lifed' years ago, it won't run on Lion, and some of the document types created in it - Databases in particular - cannot be opened at all by any other program whatever. Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (with some reservations in both cases), but building up a collection of AppleWorks documents at this stage is going to lead to problems later on.
It's difficult to know what to recommend for a PowerPC machine that would still be compatible with modern ones. An older version of Microsoft Office, perhaps, if you can find one which will run on PPC; but most of the modern Word Processors are Intel only. This is something you would need to investigate.

Have a 10.6.8 mac and the icloud icon does not appear on the system preferences

Hello,
I have a 10.6.8 mac and the icloud icon does not appear on the system preference, even if I'ved upgraded the software.
Renee

The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

My CS6 Production suite does not update from the help menu? The appilcation Manager says: "The updat

My CS6 Production suite for Windows 8 does not update from the help menu? The appilcation Manager says: "The update server is not respondiing, the server might be offline temporarily..." I have registered correctly. I have turned off my AVG virus protection and tried to update my software, still the Application Manager gives the same response. When I login, I can see that my serial numbers are there, so it must have registered correctly.
Help!

If you don't want to download the updates manually, then you need to update your Application Manager. The relevant links are here:
Windows
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
Hope this helps.

I recently purchased Scan Snap for my Mac OS.X which came with Acrobat XI standard. This does not load on the Mac. Can I switch this for a Mac version?

I recently purchased Scan Snap for my Mac OS.X which came with Acrobat XI standard. This does not load on the Mac. Can I switch this for a Mac version?

Order product | Platform, language swap

HT4414 I get a message "In order to continue installation, please close the following application. I closed the application, but the message does not close and the installation is "frozen" ... how do I reset?

I get a message "In order to continue installation, please close the following application. I closed the application, but the message does not close and the installation is "frozen" ... how do I reset?

Try posting in the Mountain Lion forum. Here is the link below. This forum is for old software circa 2003.
https://discussions.apple.com/community/mac_os/os_x_mountain_lion

Icloud application does not load

I have been using two lap tops.. one running windows 7 and the other windows XP.
Regularly I can not access my icloud account -
1. It does not load the application and
2. Unable to access the server
I've looked at all the control panel settings and privacy settings.. but I find nothing. To add to the mystery is .. sometimes it loads just fine.
I am in India and the internet is "wonky" to say the least. That is my default answer but it was so bad this morning that I had to submit the question to see if it is something else in the settings I need to change.
Any insights out there??
kleen

I have the same problem. Clicking iCloud in the preference pane results in the follow:
"Preferences Error could not load iCloud preference pane."
I don't use iCloud, and would prefer to completely disable it. However now I am receiving a "log into iCloud" pop up every time I start my computer that is very annoying.
See screenshots below. Please help.

Ryanair 'flights' dialog box does not load; all the rest works, and in Opera it works; can you help? it seems everything else works fine

Ryanair 'flights' dialog box does not load; I tried in other languages too, it is the same error; it works fine with opera browser in this very same computer I am writing in; please help, if you can; it worked up to two months ago, then I don't know, too long has past from last time I used ryanair, and the rest works all fine, it seems... thanks so much for your time,

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Full extractor does not load all the g/l accounts

Hello experts,
I have a empy DataStore Object (ZFI_O02) and I want to load the information (g/l accounts) with a full infopackage. The load have the status of "Green" but when I check the information I have accounts without some documents. I do not know why my full extractor does not load correctly all the information.
I test the DataSources (3FI_SL_K2_SI) with the Tcode RSA3 and the test shows the all the accounts with all the documents.
Others tests -> I used the same infopackage (full mode) and restrict with the 0FISCPER (2010) and 0GL_ACCOUNT (Account Number) checked the PSA and I have the acoount with all the documents.
-> I used the same infopackage (full mode) and restrict only with the 0FISCPER (2010) checked the PSA and I have the account with one document missed.
Please help me.
Regards
Jeanette

Hi Jeanette,
Looks like the data is getting overwritten in the DSO. This usually happens when there are records with same Key Fields and also has certain characteristics that are unique but not key fields.
I suggest, you take a subset of a GL for which the data does not match, then compare the entries in the DSO and the PSA.
For Eg: If Business Area is not the key, then the data for all the same business areas will be overwritten. Thus making the BA key would eliminate the problem.
Hope this helps.
Regards,
Gaurav

Does not read from the path

Hi All,
I am not sure if this is the right place for posting this.
I have Oracle reports 10g installed in a linux box (10gAS). I have specified the path of the directories for reports in reports.sh file. But still it does not read from that path. What could be the problem?

1. Check the env variable REPORTS_PATH
2 Check the reports server conf file path. Open the <reports servername>.conf
and check the value.
Rajesh Alex

App Store does not load & kills the internet connection

Hello I'm currently using MBP 13' 2011 v. 10.7.2.
App Store window pops up after opening, but nothing actually shows up. It shows as if it is trying to load the App Store with the spinning indicator, but the app remains empty. Not only it does not load, it also kills whatever internet connection I've attempted on Safari. YouTube videos stop loading once App Store opens, for example.
Please help.
Thanks.

Timmy...
With multiple issues such as you are experiencing, use Lion Recovery

ITUNES MOVIE DOES NOT LOAD ALL THE WAY

"Skyfall" the movie will not load all the way through

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
Now launch your iTunes and see if it is working now.

My HP 650 laptop does not shutdown by the normal method, running Windows 8

My HP 650 laptop does not shutdown by the normal method, I am running Windows 8

@CraigD21
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

TS3988 icloud.exe does not load from the installer onto my windows 7 laptop

Similar Messages

Maybe you are looking for