TS3988 icloud only works with one version of outlook

I uninstalled 2013 outlook and re-installed 2010 but I still get an error message when trying to launch icloud. The error says icloud cannot work with two versions of outlook (which i don't have now) any thoughts?

You need to remove all traces of both versions of Outlook, then install 2010 again.

Similar Messages

Ill.CS3 - Why can I only work with one sheet on the desktop? I want to design a multi page document...

ill.CS3 - Why can I only work with one sheet on the desktop? I want to design a multi page document...

Use this ancient work-around:
Create mutli-page PDF | Illustrator

My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

My iMessage only works with one contact in my phone. I text several people that have the iphone 4s, theirs works with other people. But mine only works with one person. Why?

about message http://support.apple.com/kb/HT3529
troubleshooting message http://support.apple.com/kb/ts2755

Can't sign in using any 3rd party email client with my iCloud account on any Mac. Tried every settings, My iCloud only works with Mail.app

Can't sign in using any 3rd party email client with my iCloud account on any Mac or any other Mac. My iCloud will only work with Mail.app. All the clients I tried work perfectly well as long as I sign in with somebody else's iCloud account. But mine won't work no matter the client (Postbox, Unibox, Airmail...) and no matter the computer.
I can access my account on iCloud.com, but I can't use email clients without getting error messages prompting me to check my password or login.
I was able to use those clients in the past but a couple of months ago I got logged out of Airmail and the issue started just like that!
I tried every possible mail server settings including the following:
IMAP information for the incoming mail server
Server name: imap.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 993
Username: The name part of your iCloud email address (for example, emilyparker, not [email protected])
Password: Your iCloud password
SMTP information for the outgoing mail server
Server name: smtp.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 587
SMTP Authentication Required: Yes
Username: Your full iCloud email address (for example, [email protected], not emilyparker)
Password: Your iCloud password

Those are the correct settings, and they work with any email client that supports Imap.
Try again.

Automatic downloads only works with one Mac user account, can I get help?

I have three user accounts on my iMac, and I set up iTunes Automatic downloading on my iTunes account on my iMac user account. Then I went to set up my brothers iTunes automatic download on his iMac user account but it said the computer was already in use, and gave me options like transfer or cancel. Just to clarify this was an attempt with one iMac two user accounts and two separate iTunes accounts.

It appears we are all having the same issue, and for themost part talking about the same thing, but to reiterate:
1) One (1) computer, to help distinguish the devices letscall it an iMac
2) Two (2) or more distinct User ID’s on said iMac with fullAdmin permissions
3) Each distinct User ID on the iMac has a distinct Apple IDwith an associated iTunes and iCloud account
4) For every User ID / Apple ID there is a separate personwith their own iDevice
5) None of the iTunes accounts, iDevices or Apple ID’s arecross sync’d
5) (a) Forexample, Person 1 does not share apps, etc. with Person 2’s iTunes account. Weare assuming everyone distinct Apple ID / iDevice buys its own App’s, musicetc.
6) Only one (1) of the iMac User ID’s and that User ID’sassociated iTunes and iCloud account can have auto-download and iCloud servicesactivated at any one time.
6) (a) Just to be redundantly clear,that means that every other User ID / iTunes – iCloud ID/ iDevice CANNOTauto-download or sync to iCloud
Somewhat reformed PC guy here (wife is a life long Macuser), but all I can say is are you (*&^%$%^&* kidding me?
If I wanted these problems, and didn’t care about aestheticsor battery life, I would have stuck with Win-crap / Android for 50% or less ofthe cost.
Besides my preference for the Win-Devil UI (I know, I know…)I cannot believe after spending more than $4,500 on iFleecing this summer I amstill having issues like this (Mac Air, iMac, iPhone 4- two and the buy-out oftwo cell contracts).
Granted, when I plug something in, it works… the way Stevethinks I should want it to function.
In the hopes of avoiding some iFlogging by my fellow usershere, I concede the superiority, in every conceivable way, of all of thehardware and even like the MS Office suite in Mac better (at least not less). Ihave no intention of going back to the Win-Devil (don’t even run an emulator oneither computer), but this is a Windows-like screw-up.

SMS relay only works with one iMac or Macbook Pro, but not both?

I recently got a new iMac (5K). I already own a Macbook Pro 13" (bought in 2013). When I got the new iMac, I wanted to transfer all my data from my Macbook onto the new iMac, so I used the most recent time machine back-up from my Macbook to install onto the new iMac. No issues there. I also own an iphone 5s and ipad mini (1st generation), all with the most recent software updates. Approximately 1 week ago, SMS relay stopped working between my iMac and my iphone. I could type an SMS text message on my iMac, send it, and although it would transmit to the recipient, it would say "not delivered" on my iMac (it would show up as delivered successfully on my iphone). Consequently any SMS messages received would not show up on my iMac. I use the same login for my macbook pro and my iMac and for some reason my iphone stopped listing my iMac as one of the devices for SMS relay. I was on-line with Apple support for 3+ hours yesterday trying to figure out why this wasn't working. I did an SMC reset which temporarily fixed the problem, but as soon as I tried to use SMS relay with both the macbook pro and the iMac, the phone would only recognize one of them and ultimately always choose the macbook pro.
iMessage chats still sync just fine but the SMS chats do not any more. I was wondering if anyone else had the same issue, and if they did, are there any fixes?
Thanks,
Jon

Both the mini-displayport plugs and TB plugs are physically compatible which is why you can plug it in. But if the iMac has a mini-displayport for video it won't work with the TB display.
Check your System Profile to see if it tells you whether you have a TB port. And if there is no information about that post here or look up for yourself the kind of ports for that model of iMac. System Profiler will give yo that information (click Hardware on the left). From the model information it can be definitively determined whether that imac supports TB.
Also, so long as the Displays system preferences is not showing an Arrangement tab then it is not detecting the second display.

My time capsule will only work with one device at a time

I just purchased the Airport time capsule. I have it set up with my imac, but I also run a macbook air, older macbook, PC laptop, PC desktop, wii, xbox, and 3 iphones off of this device. My issue is that my ISP does not serve more than 1 IP address and with previous routers, the IP address they recognized was only on my router. Now, each time a new device tries to use the internet, my ISP is bypassing time capsule and recognizing the device IP address. It's very frustratitng! How do I set up my Time Capsule so that it's IP address is the only one my ISP recognizes, but all my devices are able to run off of the Time Capsule as the router. (obviously I am not over educated in this area so solutions in simple language are greatly appreciated!) Thanks!

I read the same solution somewhere else in the forum but it does not solve my problem. When I set up the Airport, it sets up in bridge mode by default. When I contacted my ISP they said it needed to be in bridge mode (their rationale is that they only allow 1 IP address). I just switched it to DHCP and NAT and this is what the default settings go to:
After I update it with these settings my internet won't work at all and this is the error message I get:
Any suggestions?
My internet "Digis". www.digis.net. They are a smaller company and put a dish on my roof. The modem is very small, does not have a router.

My MBP Retina doesn't allow the use of two Thunderbolt to DVI adapters. It only works with one TB - VGA adapter and one TB - DVI adapter. However now the color on the VGA connected monitor is slightly different.

The monitors are Viewsonic VA2406m-LED. The Display preferences show all three monitors but one monitor always says "No Signal" if they are both connected TB -> DVI.
The Color on the VGA connected one is slighly off. It seems like I should be able to connect two DVI monitors not sure why this is stopped. Does it have something to do with the Graphics card?

The problem was with the newEgg adapter. I just went to the Apple Store and bought an Apple adapter and the monitor now displays correctly.
For future reference, in case anyone experiences this problem:
the newEgg adapter is part number 9SIA1PU0P88920, described as a Thunderbolt Mini Displayporrt Display Port DP to DVI Adapter for APPLE Macbook Pro Air and the full description says it works for macbook pro, etc.
when this adapter is used, the macbook pro recognizes the monitor, but the monitor displays nothing.
When the apple adapter (MB507Z/B Mini Display Port to DVI Adapater) is used, the monitor displays correctly.
Of course, the individual newEgg part might simply be defective, but I doubt it. moral -- spend the extra $$ and buy the Apple adapter.

Graphite only works with one laptop at a time

I'm looking for some help for my daughter who is out of town doing an internship, so I'm trying to troubleshoot long distance. She has our old graphite airport base station. It worked fine here last time it was used. She has comcast cable internet in her apartment in Denver. She owns a G4 iBook & her roommate has a MacBook. The cable modem is plugged into the graphite base station and my daughter can access the internet wirelessly, but her roommate cannot. If my daughter's computer is off, then the roommate can access the internet wirelessly. I can't figure out why the Airport is only allowing one computer at a time to connect to the internet. Any ideas or suggestions?
Thank you!
Karin

The option is usually called "Share single IP address" but it may be worded differently on the graphite.

Does icloud only work with my .me account or can I add my other email accounts?

I have been trying for a couple of days now, looking thru settings and logging in ti the cloud from multiple computers but I cant find a way to add my other e-mail accounts to my icloud. Is it realey exclusive to the apple mail account?

Welcome to the Apple Community.
iCloud will only sync your iCloud mail. It does this because it is an IMAP email account not a POP email account.
If you want other email addresses to do the same thing, contact the provider to see if they can change your email account to an IMAP account. (This is what I did)

Custom service only working with one file, not multiple ones

Hi,
I created a service in which I can resize selected images through photoshop and format them for the web. I was able to successfully place this into a contextualized menu, which is awesome for me.
However, when I select a group of files in the finder, secondary click, and run the service, the action only completes the first file. The other files remain open in photoshop (they do not get resized, or saved).
What am I doing wrong?
My service workflow looks like this:
Service recieves selected "image files" in "any application"
Save for Web:
save to: "a web folder I made for this practice"
use "Adobe photoshop CS
type: jpeg
constrain size to 800 X 800
Then the second part of the workflow is"Make names Web-Friendly.
I found these plugins on Apples download page, called "save for web 2.5"
Any help would be great.
Thanks!

where i said one file.. i mean one file tipe ex: .M2T .jpg .mp4 etc

Icloud only working in one direction??

Icloud seems to be working when sending my ical info from my macbook pro to my ipad.. but not in the other direction. It worked fine when i first set it up? any suggestions?

First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

I need version 3.6.16 for an at home online job. I am unable to find it anywhere from a secure source. Is there a way to get a link to download it? The ChaCha Toolbar only works with this older version. Thanks!

I need the older version 3.6.16 for my at home based job for ChaCha. Their toolbar only works with this version and they say it is more compatible with this. And I have not been able to find a secure link to download this older version. Can you give me a secure link or is it possible to download this older version securely?

If you only need Firefox 3.6 for just one thing then you may be better off using a portable version of Firefox as it will not impact your Firefox 6.0.2 install. You can install it on hard disk or on a usb flash drive. Firefox 3.6.22 is the current security update as 3.6.16 is old.
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Will Itunes only communicate with one device per computer?

I get an invalid response from Itunes when my iphone4 is connected to Itunes. I also have a nano that connectes and is working properly. Will Itunes only work with one device per computer. I took the iphone to an apple store and it connects with itunes like it should. I have swapped cables and ports, and downloaded the latest version. Thanks for your help

It is mean to work with multiple devices, although not simultaneously. However I have had exactly the same issue with iTunes 10.7 and Windows7 and a new 16GB iPod touch on iOS6 just this week.
iTunes detects and displays the iPod classic fine, but won't find the iPod Touch when it is connected. The connection is working fine as the Windows OS can see the iPod touch, just not iTunes.
I had a 2nd PC, which has a copy of the iTunes on it and the same media collection - this PC immediately recognised the Touch, so I have gotten around this issue, although I suspect reinstalling iTunes on the original PC may have also fixed it - I have kept a copy of iTunes 10.7.exe so I can reinstall and avoid that POS V11.
I suspect iTunes gets tetchy about hooking in two devices.
Actually as a mostly Windows / Android user, I don't get why on earth do Apple force you to do everything via iTunes anyway? Seems crazy to me. I sort of like the way I can hook up the Android unit and just drag over the files I want without all the darn hoop jumping Apple wants me to do. Anyway... I digress.
So Not sure. Happy I found an easier solution than a reinstall of iTunes. Of course, using a 2nd (mirrored) PC might not be an option for you. Good luck. Wish I had a better / more useful suggestion for you.

HT4759 Does iCloud only work on a iphone?

Does iCloud only work with iphones? I have an Android phone.

iCloud works on modern Mac and Windows machines as well as any Apple iOS 6.1, or higher device.
It will not work on and Android device.

TS3988 icloud only works with one version of outlook

Similar Messages

Maybe you are looking for