TS3988 My computer won't register...?

My computer won't register...I press the "Register Computer" it runs for a long time but never works...
What am I doing wrong??

Hi Emily-
The first thing to try is to reset your iPod - hold down the Menu and Select (center) buttons until you see the Apple logo. This will often get it recognized. If it doesn't, see these tips:
iPod appears in Windows Explorer but does not appear in iTunes

Similar Messages

New iPod - computer won't register it .. getting errors HELP!!

So i got a brand new 30GB video iPod for Christmas today (had a mini but the battery died) and I isntalled iTunes and everything and followed all the directions and i hooked up my ipod to transfer my songs and it was stuck on the do not disconnect and then my itunes had an error saying "iTunes cannot read the contents of the iPod 'iPod'. Use the iPod Software Updater application to restore the iPod to factory settings" so i reset my ipod and reinstalled the software and the same thing kept happening. I checked online all over Apples website and couldn't find anything that worked. PLEASE HELP!! I was furious when this happened, still am actually so please if anybody can help me I will be so grateful!! Thanks!!

Try changing the Drive Letter of the new ipod, instructions are [here|http://support.apple.com/kb/TS1493], make sure to give it a different letter than the 80 gb.

My computer won't register my nano to update

I tried to update my nano but it isn't showing up on iTunes. i have unplugged and replugged many times. closed and reopened iTunes many times. HELP?!

Hi Emily-
The first thing to try is to reset your iPod - hold down the Menu and Select (center) buttons until you see the Apple logo. This will often get it recognized. If it doesn't, see these tips:
iPod appears in Windows Explorer but does not appear in iTunes

I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed. Now it's not registered and the computer won't recognize my device. How do I fix this

I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed. Now it's not registered and the computer won't recognize my device. How do I fix this?

iPod not recognized in 'My Computer' and in iTunes for Windows
Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273) to register your iPod Nano.

My iPod said that it needed to do an update but halfway thru it stopped and said there was an error and now it's stuck with the apple and an empty loading bar. Also it won't register with my computer. Help?

I plugged in my iPod and it needed an update. Before the update could complete it said there was an error and then closed the window. Now my iPod is stuck in the loading screen and won't register in iTunes. Please Help.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iTouch won't turn on and the computer doesn't register it when plugged in.

The screen never went white or crashed, it just won't turn on. I tried plugging it into the computer but it won't register and the base of the iPod near the plug area got really hot. I don't know what's wrong with it or what to do. Help please?

Any charging icon when the iPod Touch get connected?
If no, you can let the iPod Touch connected with any power source, such as computer usb port, then press and hold the "sleep / wake" and "Home" button at the same time until you can see an Apple icon on the screen (usually take around 20 seconds)
Maybe you have to send it to Apple if still won't switched on.

Ipod won't register on the computer

i have a new ipod nano, and when i hook it up to my computer, it doesn't show up anywhere that my ipod is hooked into the computer. i've bought new usb cords, and tried resetting it many times, but nothing has helped. i can't restore it, because the computer doesn't register my ipod as being hooked up. any ideas on what i should do?
email- [email protected]

Have you downloaded iTunes 7? If not, here is the site.
http://www.apple.com/itunes/download/
Once downloaded, start iTunes and then connect iPod.

Creative Sound Blaster Audigy NX won't register as a USB device!

@Creative Sound Blaster Audigy NX won't register as a USB device!H I just moved my computer to another location across the room.
I didn't drop or beat or throw anything. I picked things up, moved them, and set them down carefully. I didn't abuse anything at all.
Now, my Sound Blaster Audigy NX doesn't work anymore.
I plug it into my USB hub, nothing. I plug it into a USB port in my laptop, and nothing, either. None of the USB ports in the hub or the laptop work, even after restarting. The light on the hub doesn't even light up to detect the device at all. I can't turn it on. It doesn't seem to matter if my speakers are actually on or off, or whether I have sound playing on the computer or not.
I've restarted countless times, too.
It worked before I moved it, and now, my expensi've sound card doesn't work. What's up, now?

joaolfb,
Audigy 2 NX will need to be connected with the power adaptor inorder to run. USB will not be enough to sustain the power consumption of the sound card.
Jason

My Ipod Touch won't register on Itunes??

I have an Ipod Touch and it won't sync with my new laptop. I have tried restarting Itunes, the computer and my ipod, plugging it into different ports muliple times, and looking on mutiple sites.. I synced my ipod with my old desktop fine but now i have all my music, apps, ect tranfered onto my laptop and Itunes won't register my Ipod. Whenever i plug it in my laptop makes a low dum kind of noise and i can see it when i look at my devices under my computer, although i can only see my pics, but Itunes does't change. All the sites say check under the device column on the lft-hand side, but there isn't one. While I'm asking questions, If i have all the things my old Itunes library has, will all my history (like in conversations and youtube videos) be deleted? Oh and my laptop is a windows 7.

Try looking at the previous posts on the right side of this page under he heading "More Like This".

My serial number won't register online !!

My serial number won't register online! Every single time I try and register it and get to Step 6, it says:
"Please review the list of products that will be registered. An asterisk next to a product indicates that the product will be entered into our records, but its serial number or marketing part number could not be recognized."
So does this mean it cannot be registered or does it mean it is registered? I know for sure its the right serial number. I've entered it about a million times and it keeps coming up as that.
I've tried 2 weeks ago, and a week ago and again today. The same thing comes up every single time. Also I cannot check how many days I have left on my warranty on the apple site because it says:
"Our records indicate that this product has not been registered. Please register this product today."
So can anyone help me? Or is anyone having the same type of error like me?

travisw
Let us see if we can resolve this issue...
Let us go through the typical drill....
1. Does the problem exist with and without the antivirus and firewall(s) disabled?
2. Are you working with a pen and tablet instead of a mouse?
3. Do you have the latest version of QuickTime installed and are you running the programs as administrator?
4. Is your video card/graphics card driver up to date according to the web site of the manufacturer of the card?
5. Are you running the program with an active Internet connection? What computer browser are you using for the download
of replacement installation files? Have you tried another for the download - such as Internet Explorer or Firefox?
Suggestions
1. Uninstall the program the typical Control Panel way
2. Do a free ccleaner run through (regular and registry cleaning parts) to get rid of leftovers from incomplete installs/reinstalls
CCleaner - Download
3. Install the Premiere Elements 13 tryout from the following web site and insert your purchased serial number in them during
installation.
Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
4. Install the 13.1 Update from an opened project's Help Menu/Updates.
5. If all else fails, try creating a new user account with administrative privileges and installing and trying to run Premiere Elements 13 from there.
If you check the Event Viewer/Windows Logs and its Application, do you see any description for the cause of the problems on the dates when
the problem presented?
Any questions or need clarification on the above, please do not hesitate to ask.
Thank you.
ATR

Brand new laptop, tried to install Ram upgrade and computer won't turn on (no bios, nothing)

I got my new qosmio x70 yesterday with a ram chip I ordered online. When I install the chip into either ram slot, the computer won't boot. It won't even turn on.
When I click the power button, the light aournd the button turns on for a moment then off again. That's it.
I thought maybe I could make a bios change, but there are NO memory options in bios. I also tried both ram chips from my old Qosmio (3 years old) and they had the same problem. Any ram that touches my machine disables it. Am I going to have to send back my brand new toy already!?
Solved!
Go to Solution.

Qosmio X70-ABT3G22 part # PSPLTU-0E2069
Your support page is here - http://support.toshiba.com/support/modelHome?freeText=1200007040
Toshiba's memory just enter your part number PSPLTU-0E2069 see here- http://www.toshiba.com/us/laptops/memory-finder
Here is what Crucial recommends - http://www.crucial.com/store/listparts.aspx?model=Qosmio%20X70-ABT3G22&Cat=RAM -click on all compatible ram to see all available ram single and pairs.-
I have used Crucial to order in the past because they guarantee compatibility and you should not have any issues with ordering from Toshiba either. The memory you posted may work, looks like the same specs but I don't want to be the one to tell you it will work incase you have trouble with that one.
Here are memory spec terms from the crucial site to help understand what they mean.
Memory spec terms
If you're not sure if a module is right for your system, use the Crucial Memory Advisor tool for a list of guaranteed compatible modules.
NON-ECC/Non-parity— Most desktop and laptop computers take NON-ECC or Non-parity memory.
ECC/Parity— ECC or parity modules look for errors in data and are most often found in servers and other mission-critical applications used by large networks and businesses.
Unbuffered— Most PCs and workstations use unbuffered memory which is faster than registered memory.
Registered/Buffered— Registered or buffered modules delay all information transferred to the module by one clock cycle. This type of memory is primarily used in servers.
Fully buffered— Designed for next-generation servers, features an advanced memory buffer.
CL— CAS (column address strobe) latency, which is the number of clock cycles it takes before data starts to flow after a command is received. Lower CL is faster. Modules with different CL can be mixed on a system, but the system will only run at the highest (slowest) CL.
Component configuration— (For example: 64Meg x 64) Indicates the size of the memory chip components on the module.
Voltage — For example 2.6V. Indicates the power used by the module. The lower the better
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Cisco SIP Phone 9971 won't register on CME 8.6 or 8.5 Please HELP

Please help me , I have problem with registering Cisco SIP phone 9971 with CME 8.6 on ISR 2901.
I configured CME for SIP clients, then I add configuration for 9971 phone and create profiles. Phone downloaded SEP...xml file from CME,after that phone look for g4-tones.xml and gd-sip.jar files, I added them to CME after that phone downloaded them and reboot. Now phone is stuck in some kind of loop and does not register on CME.
On phone log I can see repeting next few messeges.
12:01:58a No DNS Server IP
12:01:59a Updating Trust list
12:01:59a No Trust List instaled
12:01:59a SEP04C5AB03B0D.cnf.xml (TFTP) // at this time phone download SEP...xml file from CME
12:02:00a VPN Error: VPN is not Configured
on CME if issue DEBUG TFTP EVENTS i receive next few lines
*Aug 18 18:20:19.891: TFTP: Looking for CTLSEP04C5A4B03B0D.tlv
*Aug 18 18:20:19.987: TFTP: Looking for ITLSEP04C5A4B03B0D.tlv
*Aug 18 18:20:20.083: TFTP: Looking for ITLFile.tlv
*Aug 18 18:20:20.347: TFTP: Looking for SEP04C5A4B03B0D.cnf.xml
*Aug 18 18:20:20.351: TFTP: Opened flash:/SEP04C5A4B03B0D.cnf.xml, fd 14, size 4585 for process 141
*Aug 18 18:20:20.363: TFTP: Finished flash:/SEP04C5A4B03B0D.cnf.xml, time 00:00:00 for process 141
here you can see verison info of CME
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 24-Mar-11 15:31 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
ELTOSAN_ROUTER uptime is 1 hour, 50 minutes
System returned to ROM by reload at 16:29:20 UTC Thu Aug 18 2011
System image file is "flash:/c2900-universalk9-mz.SPA.151-4.M.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
Cisco CISCO2901/K9 (revision 1.0) with 471040K/53248K bytes of memory.
Processor board ID FGL1508252Y
3 Gigabit Ethernet interfaces
2 terminal lines
1 Virtual Private Network (VPN) Module
4 Voice FXO interfaces
4 Voice FXS interfaces
1 Internal Services Module (ISM) with Services Ready Engine (SRE)
   Survivable Remote Site Voicemail (SRSV) on Cisco Unity Express (CUE) 8.5.1 in slot/sub-slot 0/0
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
254464K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device#   PID                   SN
*0        CISCO2901/K9          xxxxxxxxxxxxx
Technology Package License Information for Module:'c2900'
Technology    Technology-package          Technology-package
              Current       Type          Next reboot
ipbase        ipbasek9      Permanent     ipbasek9
security      securityk9    Permanent     securityk9
uc            uck9          Permanent     uck9
data          None          None          None
Configuration register is 0x2102
this is RUNNING CONFIGURATION
! Last configuration change at 16:10:12 UTC Thu Aug 18 2011
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname ELTOSAN_ROUTER
boot-start-marker
boot system flash:/c2900-universalk9-mz.SPA.151-4.M.bin
boot-end-marker
no aaa new-model
no ipv6 cef
ip source-route
no ip routing
no ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.5.1 192.168.5.10
ip dhcp excluded-address 192.168.5.200 192.168.5.255
ip dhcp pool phone
   network 192.168.5.0 255.255.255.0
   default-router 192.168.5.251
   option 150 ip 192.168.5.251
ip dhcp pool data
   relay source 192.168.2.0 255.255.255.0
   relay destination 192.168.2.201
multilink bundle-name authenticated
crypto pki token default removal timeout 0
voice-card 0
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
fax protocol pass-through g711alaw
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 192.168.5.251 port 5060
max-dn 6
max-pool 6
load 9971 sip9971.9-1-1SR1.loads
authenticate register
tftp-path flash:
create profile sync 0005135312289902
voice register dn 1
number 207
allow watch
name GossaVM
label 207
voice register dn 3
number 101
name Dejan
label 101
mwi
voice register pool 1
id mac 000C.29C5.0011
number 1 dn 1
dtmf-relay sip-notify
username testvm password testera
codec g711alaw
voice register pool 3
id mac 04C5.A4B0.3B0D
type 9971
number 3 dn 3
presence call-list
dtmf-relay rtp-nte
username dejan password 1234
codec g711alaw
no vad
license udi pid CISCO2901/K9 sn xxxxxxxxxxxx
hw-module ism 0
hw-module pvdm 0/0
redundancy
interface GigabitEthernet0/0
description INTERFACE INTERNAL
no ip address
no ip route-cache
duplex auto
speed auto
no mop enabled
interface GigabitEthernet0/0.2
description LAN DATA
encapsulation dot1Q 2
ip address 192.168.2.251 255.255.255.0
no ip route-cache
interface GigabitEthernet0/0.5
description LAN VOICE
encapsulation dot1Q 5
ip address 192.168.5.251 255.255.255.0
no ip route-cache
interface ISM0/0
no ip address
no ip route-cache
shutdown
!Application: SRSV-CUE Running on ISM
interface GigabitEthernet0/1
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
interface ISM0/1
description Internal switch interface connected to Internal Service Module
shutdown
interface Vlan1
no ip address
no ip route-cache
shutdown
ip forward-protocol nd
no ip http server
no ip http secure-server
snmp-server community public RO
tftp-server flash:dkern9971.100609R2-9-1-1SR1.sebn alias dkern9971.100609R2-9-1-1SR1.sebn
tftp-server flash:kern9971.9-1-1SR1.sebn alias kern9971.9-1-1SR1.sebn
tftp-server flash:rootfs9971.9-1-1SR1.sebn alias rootfs9971.9-1-1SR1.sebn
tftp-server flash:sboot9971.031610R1-9-1-1SR1.sebn alias sboot9971.031610R1-9-1-1SR1.sebn
tftp-server flash:skern9971.022809R2-9-1-1SR1.sebn alias skern9971.022809R2-9-1-1SR1.sebn
tftp-server flash:sip9971.9-1-1SR1.loads alias sip9971.9-1-1SR1.loads
tftp-server flash:United_States/g4-tones.xml
tftp-server flash:English_United_States/gd-sip.jar
control-plane
voice-port 0/0/0
voice-port 0/0/1
voice-port 0/0/2
voice-port 0/0/3
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/1/2
voice-port 0/1/3
mgcp profile default
gatekeeper
shutdown
line con 0
line aux 0
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password jebiga
login
transport input all
end
I did not have any kind of problem with X-LITE to register to CME. also try with few SCCP phones 7940 and I did not any kind of problem .
this is content of SEP....xml file for 9971
<device>
<deviceProtocol>SIP</deviceProtocol>
<devicePool>
<dateTimeSetting>
<dateTemplate>M/D/YA</dateTemplate>
<timeZone>Pacific Standard/Daylight Time</timeZone>
<ntps>
<ntp priority="0">
<name>0.0.0.0</name>
<ntpMode>unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<sipPort>5060</sipPort>
</ports>
<processNodeName>192.168.5.251</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<sipProfile>
<sipProxies>
<registerWithProxy>true</registerWithProxy>
</sipProxies>
<sipCallFeatures>
<cnfJoinEnabled>true</cnfJoinEnabled>
<localCfwdEnable>true</localCfwdEnable>
<callForwardURI>service-uri-cfwdall</callForwardURI>
<callPickupURI>service-uri-pickup</callPickupURI>
<callPickupGroupURI>service-uri-gpickup</callPickupGroupURI>
<callHoldRingback>2</callHoldRingback>
<semiAttendedTransfer>true</semiAttendedTransfer>
<anonymousCallBlock>2</anonymousCallBlock>
<callerIdBlocking>2</callerIdBlocking>
<dndControl>2</dndControl>
<remoteCcEnable>true</remoteCcEnable>
</sipCallFeatures>
<sipStack>
<remotePartyID>true</remotePartyID>
</sipStack>
<sipLines>
<line button="1" lineIndex="1">
<featureID>9</featureID>
<featureLabel></featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5060</port>
<name></name>
<displayName></displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>dejan</authName>
<authPassword>1234</authPassword>
<sharedLine>false</sharedLine>
<messagesNumber></messagesNumber>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
<line button="2" lineIndex="2">
<featureID>9</featureID>
<featureLabel>101</featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5060</port>
<name>101</name>
<displayName>Dejan Rakic</displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>dejan</authName>
<authPassword>1234</authPassword>
<sharedLine>false</sharedLine>
<messagesNumber></messagesNumber>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
</sipLines>
<enableVad>true</enableVad>
<preferredCodec>g711alaw</preferredCodec>
<dialTemplate></dialTemplate>
<kpml>1</kpml>
<phoneLabel></phoneLabel>
<stutterMsgWaiting>2</stutterMsgWaiting>
<disableLocalSpeedDialConfig>true</disableLocalSpeedDialConfig>
<dscpForAudio>184</dscpForAudio>
<dscpVideo>136</dscpVideo>
</sipProfile>
<commonProfile>
<phonePassword>1234</phonePassword>
<callLogBlfEnabled>2</callLogBlfEnabled>
</commonProfile>
<featurePolicyFile>featurePolicyDefault.xml</featurePolicyFile>
<loadInformation>sip9971.9-1-1SR1.loads</loadInformation>
<vendorConfig>
</vendorConfig>
<commonConfig>
<videoCapability>0</videoCapability>
<ciscoCamera>0</ciscoCamera>
</commonConfig>
<sshUserId>dejan</sshUserId>
<sshPassword>1234</sshPassword>
<userId></userId>
<phoneServices>
<provisioning>2</provisioning>
<phoneService type="1" category="0">
<name>Missed Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/MissedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="1" category="0">
<name>Received Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/ReceivedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="1" category="0">
<name>Placed Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/PlacedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="2" category="0">
<name>Voicemail</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/Voicemail</url>
<vendor></vendor>
<version></version>
</phoneService>
</phoneServices>
<versionStamp>0131511014412102</versionStamp>
<userLocale>
<name>English_United_States</name>
<langCode>en</langCode>
</userLocale>
<networkLocale>United_States</networkLocale>
<networkLocaleInfo>
<name>United_States</name>
</networkLocaleInfo>
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<servicesURL>http://192.168.5.251:80/CMEserverForPhone/serviceurl</servicesURL>
<dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
<dscpForCm2Dvce>96</dscpForCm2Dvce>
<transportLayerProtocol>2</transportLayerProtocol>
</device>

Hello,
I'm facing exactly the same problem, that is:
a Cisco SIP Phone 9971 won't register on CME 8.6 running on a 2811
I have read all the postings to this Forum, but I have not been able to solve it.
In my case the commands voice register dn and voice register pool are OK.
So frankly, I have no idea what I could be missing.
I'm pasting the Router's config.
I hope somebody is able to point me in the right direction.
Here is the config. Thank you!
C2811#sh run
Building configuration...
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname C2811
no aaa new-model
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 172.25.140.1 172.25.140.10
ip dhcp excluded-address 172.35.140.1 172.35.140.10
ip dhcp pool Data
network 172.25.140.0 255.255.255.0
default-router 172.25.140.1
option 150 ip 172.25.140.1
dns-server 172.25.140.1
ip dhcp pool Voice
network 172.35.140.0 255.255.255.0
default-router 172.35.140.1
option 150 ip 172.35.140.1
dns-server 172.35.140.1
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
voice service voip
allow-connections sip to sip
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 172.25.140.1 port 5060
max-dn 40
max-pool 42
load 9971 sip9971.9-4-1-9.loads
authenticate register
authenticate realm cisco
tftp-path flash:
create profile sync 0004820400584603
voice register dn 1
number 1010
allow watch
name Phone10
label Phone10
mwi
voice register pool 1
id mac 189C.5DB6.BD09
type 9971
number 1 dn 1
presence call-list
dtmf-relay rtp-nte
username adm password adm
call-forward b2bua busy 68600
codec g711ulaw
no vad
camera
video
voice-card 0
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1879153754
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1879153754
revocation-check none
rsakeypair TP-self-signed-1879153754
crypto pki certificate chain TP-self-signed-1879153754
certificate self-signed 01
(details ommited)
license udi pid CISCO2811 sn FTX1146A44H
username admin privilege 15 password 0 admin
redundancy
interface FastEthernet0/0
no ip address
duplex auto
speed auto
interface FastEthernet0/0.25
description Data VLAN
encapsulation dot1Q 25
ip address 172.25.140.1 255.255.255.0
interface FastEthernet0/0.35
description Voice VLAN
encapsulation dot1Q 35
ip address 172.35.140.1 255.255.255.0
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
tftp-server flash:P00308010200.bin
tftp-server flash:P00308010200.sbn
tftp-server flash:P00308010200.sb2
tftp-server flash:P00308010200.loads
tftp-server flash:SCCP42.9-3-1SR3-1S.loads
tftp-server flash:apps42.9-3-1ES19.sbn
tftp-server flash:cnu42.9-3-1ES19.sbn
tftp-server flash:cvm42sccp.9-3-1ES19.sbn
tftp-server flash:dsp42.9-3-1ES19.sbn
tftp-server flash:jar42sccp.9-3-1ES19.sbn
tftp-server flash:term42.default.loads
tftp-server flash:term62.default.loads
tftp-server flash:SCCP45.9-3-1SR3-1S.loads
tftp-server flash:apps45.9-3-1ES19.sbn
tftp-server flash:cnu45.9-3-1ES19.sbn
tftp-server flash:cvm45sccp.9-3-1ES19.sbn
tftp-server flash:dsp45.9-3-1ES19.sbn
tftp-server flash:jar45sccp.9-3-1ES19.sbn
tftp-server flash:term45.default.loads
tftp-server flash:term65.default.loads
tftp-server flash:/Ringtones/Ringlist.xml alias Ringlist.xml
tftp-server flash:/Ringtones/DistinctiveRingList.xml alias DistinctiveRingList.x
ml
tftp-server flash:sip9971.9-4-1-9.loads
tftp-server flash:kern9971.9-4-1-9.sebn
tftp-server flash:rootfs9971.9-4-1-9.sebn
tftp-server flash:dkern9971.100609R2-9-4-1-9.sebn
tftp-server flash:sboot9971.031610R1-9-4-1-9.sebn
tftp-server flash:skern9971.022809R2-9-4-1-9.sebn
tftp-server flash:/g4-tones.xml alias United_States/g4-tones.xml
tftp-server flash:/gd-sip.jar alias English_United_States/gd-sip.jar
control-plane
mgcp profile default
telephony-service
max-ephones 24
max-dn 48
ip source-address 172.25.140.1 port 2000
cnf-file location flash:
load 7960-7940 P00308010200
load 7942 SCCP42.9-3-1SR3-1S.loads
load 7945 SCCP45.9-3-1SR3-1S.loads
load 7962 SCCP42.9-3-1SR3-1S.loads
load 7965 SCCP45.9-3-1SR3-1S.loads
max-conferences 8 gain -6
dn-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 11 2014 07:18:32
ephone-dn 1
number 1001
description Phone 1
name Phone 1
hold-alert 30 originator
ephone-dn 2
number 1002
description Phone 2
name Phone 2
hold-alert 30 originator
ephone-dn 3
number 1003
description Phone 3
name Phone 3
hold-alert 30 originator
ephone 1
device-security-mode none
mac-address 001C.58FB.6E0F
button 1:1
ephone 2
device-security-mode none
mac-address 0014.A981.7F8A
button 1:2
ephone 3
device-security-mode none
mac-address 0006.5356.A4B8
button 1:3
alias exec con conf t
alias exec sib show ip int brief
alias exec srb show run | b
alias exec sri show run int
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
line vty 5 15
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
scheduler allocate 20000 1000
ntp master 1
end
C2811#

Adobe won't recognize that I uninstalled CS on old computer, won't let me activate on new computer

Adobe won't recognize that I uninstalled CS on my old computer, won't let me activate it on new computer.

Yes, uninstalling is not the same as deactivating. Call support to reset activations.
Mylenium

Hi my mid 2012 MacBook air simply refuses to start. My charger is working which is a good sign but even in safe mode my computer won't boot up! I recently installed a product called WhatSizeMac.

As said above I just installed what size Mac and now my computer won't start. As soon as I downloaded it my computer was a little glitch but regarded it as nothing. my computer was later really buggy so I decided to restart it. My computer now will not restart/turn on no matter if it is in safe mode or not. In safe mode it gets around a third of the way and then the progress bar disappeared then the gear remains for a second then the screen goes black then that is it. By the way I have OS X Maverick's .1 or.2, maybe .3 but I doubt it. PS if you can tell me a legit application that will declutter all this space I seemed to have used, yet have no idea HOW! Thanks.

If SMC and PRAM resets do not bring back life to your MBA, make an appointment at an Apple store genius bar for a FREE diagnosis.
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao.

I deleted the SystemConfiguration folder on OSX Yosemite and now my computer won't reboot.

I need some help. My WiFi connection kept disconnecting all the time so I looked on here and saw that you could fix the problem by following these steps
Navigate to /Library/Preferences using either method:
Terminal: open -a Finder /Library/Preferences
Finder: Open New Finder Window -> "Go" -> "Go To Folder ..." -> [ Type In: /Library/Preferences ]
Backup the folder "SystemConfiguration" by copying it to your Desktop.
Delete the folder as it sits in /Library/Preferences.
Done.
I didn't back up my SystemConfiguration folder and now my computer won't start up again. It gets frozen halfway on the reboot screen.
I don't know what to do. Please help.

Hello Tian10an,
Do you have TimeMachine backup? If so you could try to recover(⌘+R) to the last available one.
Unfortunately other than that the only option for you seems to be reinstalling the OS.

TS3988 My computer won't register...?

Similar Messages

Maybe you are looking for