TS3988 Passwords still being rejected

I know this has been dragging on for a long time as a topic but I have now had to reset my password twice in the last couple of weeks. No problems for a year (when I first converted to Mac) up until recently. This is happening concurrently on my Mac, iPad and iPhone. Very irritating! I have not messed around with anything; one moment it is working fine and then, for no apparent reason, my password gets rejected.
From viewing other similar threads, it would appear that nobody really knows why this is happening. The best suggestions seem to relate to it being an Apple server problem.

Tried that... Also tried sending to the original email, since I had just changed it to something recognizable a short time before. Currently failing with the email authorization on or off. Here's the latest message:
Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 5.7.1 Command rejected (state 18).
Thanks for helping... :-)

Similar Messages

  • I cannot validate my question because my password is being rejected.

    THE USER NAME IS CORRECT. I TYPED THE SAME PASSWORD . IN UPPER AND LOWER CASE) THEY WERE BOTH REJECTED.i am desperate for an answer to my question but until i can validate the question - nothing will happen.

    What question can you not validate? And have you tried requesting a new password?

  • Password is being rejected

    Ok I've just bought a lovely new Macbook pro, this afternoon. I'm trying toy download some software. The new Mac is rejecting my password. Can I look up what the password is on my old mac or my i-phone.
    In fact to log in here I had to put in my password which has been accepted so how come it won't accept it when I try and down load some software (Adobe flash player)
    Mark

    The password your Mac is asking for is your Admin password. The one you setup when first setting up your computer. Has nothing to do with your Apple ID. If you didn't setup an Admin password(you should), leave the password field blank & just hit enter.

  • My MSN Mail password is being rejected even though I am using the correct password.

    I keep entering the CORRECT password for my MSN account which I have tied to the Mail program and it keeps rejecting.  i even verified that it was working properly by going into my MSN account through Safari, signing in and retrieving (without a glitch) my e-mail...???

    Take the steps suggested in this article.
    http://support.apple.com/kb/HT2090
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Emails still being rejected

    I have inconsistent success sending print jobs to hpeprint.com.  Mail sent from certain accounts print fine, but when I send mail from my gmail account, I get a non-delivery notice with the following error:
    Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 5.7.1 Command rejected (state 18).
    I've seen other users post similar problems.  Any ideas?

    Tried that... Also tried sending to the original email, since I had just changed it to something recognizable a short time before. Currently failing with the email authorization on or off. Here's the latest message:
    Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 5.7.1 Command rejected (state 18).
    Thanks for helping... :-)

  • ATV3 Password Keeps Being Rejected

    Tonight for some reason my ATV3 keeps asking me to enter my password. I enter it correctly then I get unable to login "unknown error". My iTunes on my Mac is logged in fine, just the ATV3 that keeps failing. I have 5.2.1. The box is connected via ethernet which is working as I am able to watch Netflix on the ATV3 fine.

    Retried again this AM after two email responses from Apple Support that were nothing to do with the question I asked, sighhh.
    Anyway, signed-in first attempt this morning so something, somewhere changed.

  • I am on vacation and I am unable to get internet connection using my Powerbook G4 (with built-in Airport). It is only showing a WPA Personal for the wireless security option and the resport password is being rejected. How can I get connected?

    I need some help trying to get connected from a remote location with my Powerbook. I am a graphic designer on vacation and need to keep in touch with my clients. Need help ASAP!

    Looks like you are working with a vintage product and the operating system is a little outdated, which makes it harder to troubleshoot. It's possible that it doesn't support WPA (depending on the Airport card built-in). Otherwise, if you can connect via ethernet, check for software updates. It even might be as simple as restarting the computer.

  • TS3772 On my iphone 5 i have two iTunes ID, one is no longer in use, but keeps asking for a password which I no longer have, whilst the other is still being used. How do I delete the old ID?

    On my iphone 5 i have two iTunes ID, one is no longer in use, but keeps asking for a password which I no longer have, whilst the other is still being used. How do I delete the old ID?

    Hello steveod2
    The main thing to do is to sign out all services on your iPhone, like iCloud, iTunes & App Store, iMessage and FaceTIme. Check out the article below for more information.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Regards,
    -Norm G.

  • I am still getting redirected to various web sites when using Safari.  My PC is not affected but my I phone and I pad are.  I have reset my router and changed my admin name and password.  I am still being redirected.

    I am still getting redirected to various web sites when using Safari.  My PC is not affected but my I phone and I pad are.  I have reset my router and changed my admin name and password.  I am still being redirected.

    Chances are you mis-typed a character in the Wifi password and the devices saved that information.  Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection.  Tell your devices to forget the wireless connection and start over.
    Once you enter the proper WiFi credentials the Jetpack will allow you to connect.

  • I had to reset my iPad and lost cookies. I have allowed cookies in Settings but I,'m still being asked to install cookies. Need them particularly for my passwords. Thanks in anticipation.

    I had to reset my iPad and lost cookies. I have allowed cookies in Settings but am still being asked to install cookies. I cannot retain my passwords without cookies. Appreciate any assistance.

    What did you do? I have this same problem, help!

  • Why the Sales Order is still being processed?

    Hi,
    This process is done: Sales Order (RE - Return) --> Return Delivery (Goods receipt) --> Billing
    Sold-to party wrongly entered in the Sales Order, so they wanted to close the Sales Order. They did Cancellation for Billing (VF11) and reversed the Goods receipt (VL09).
    Also, Reason for Rejection is put in the line item (VA02). However, the status of the Sales Order is still Being Processed instead of Completed.
    From the Data Flow, it states that order-related billing status is still open*. But the Billing documents and Accounting documents are Completed and Cleared respectively as seen from the Data Flow.
    How to close this Sales Order?
    Thanks.

    Dear Friend,
    If you want to close any particular order then go to order reason and give the reason and save it.
    The system will automatically close the order and would show processed and in the due lists also it would not appear.
    award points if helpful,
    regards,
    Amlan

  • I have tried to update flash player and when I put in my password, it is rejected.  I have recently updated my email address and changed my password, but adobe will not accept.  Can I get help, please, to update flash player?

    I have tried to update flash player and when I put in my password, it is rejected.  I have changed my email and password and have so informed adobe, but I am still unable to install flash player update.  How can I update adobe flash?

    This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
    If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt.  If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
    If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.

  • [solved] Iptables - open port still gets rejected

    I am trying to open 2 ports in my firewall,5582 udp and 61185 udp and tcp. However after reading up on iptables and following this guide  (https://wiki.archlinux.org/index.php/Si … l_firewall)  these ports are still being blocked. I am new to iptables, and I've gone over the rules but still not seeing what is rejecting it. Note that 61185 gets rejected not dropped at lest the tcp. All other tested tcp ports are dropping. I have not yet been able to test udp but i assume that its not working ether.  Here's my iptables rules.
    # Generated by iptables-save v1.4.10 on Tue Jan 18 15:37:23 2011
    *filter
    :INPUT DROP [0:0]
    :FORWARD DROP [0:0]
    :OUTPUT ACCEPT [2235:279476]
    :TCP - [0:0]
    :UDP - [0:0]
    -A INPUT -s 127.0.0.0/8 -i wlan0 -j DROP
    -A INPUT -i lo -j ACCEPT
    -A INPUT -m state --state INVALID -j DROP
    -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
    -A UDP -p udp -m udp --dport 5582 -j ACCEPT
    -A UDP -p udp -m udp --dport 61185 -j ACCEPT
    -A TCP -p tcp -m tcp --dport 61185 -j ACCEPT
    -A INPUT -p udp -m state --state NEW -j UDP
    -A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -j TCP
    -A INPUT -j REJECT --reject-with icmp-proto-unreachable
    COMMIT
    # Completed on Tue Jan 18 15:37:23 2011
    # Generated by iptables-save v1.4.10 on Tue Jan 18 15:37:23 2011
    *nat
    :PREROUTING ACCEPT [1765:224576]
    :INPUT ACCEPT [0:0]
    :OUTPUT ACCEPT [2859:262280]
    :POSTROUTING ACCEPT [2860:262320]
    COMMIT
    # Completed on Tue Jan 18 15:37:23 2011
    Last edited by tsr-nc (2011-01-22 01:06:44)

    yes iptables is part of my DAEMONS array.I have reset my /etc/sysctl.conf.
    sorry my previous post i ran those commands with iptables disabled and my receiving program off.
    Your original post said you are trying to open UDP 5582 and TCP+UDP 61185, however there is nothing on your computer listening for these ports, so you are getting the connection rejected messages because iptables is allowing the packet, but the kernel has nowhere to send the packet (ie, a listening application process) so the kernel closes the connection attempt.
    Thank you i didn't understand that before
    updated
    iptables -nvL
    Chain INPUT (policy DROP 0 packets, 0 bytes)
    pkts bytes target prot opt in out source destination
    0 0 DROP all -- wlan0 * 127.0.0.0/8 0.0.0.0/0
    5449 1026K ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0
    1 40 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID
    953 400K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
    60 8029 UDP udp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW
    21 924 TCP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 state NEW
    80 8909 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-proto-unreachable
    Chain FORWARD (policy DROP 0 packets, 0 bytes)
    pkts bytes target prot opt in out source destination
    Chain OUTPUT (policy ACCEPT 6682 packets, 1176K bytes)
    pkts bytes target prot opt in out source destination
    Chain TCP (1 references)
    pkts bytes target prot opt in out source destination
    1 44 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:61185
    Chain UDP (1 references)
    pkts bytes target prot opt in out source destination
    0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:5582
    0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:61185
    netstat -tunlp
    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
    tcp 0 0 127.0.0.1:8118 0.0.0.0:* LISTEN 4042/privoxy
    tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 4073/cupsd
    tcp 0 0 0.0.0.0:3128 0.0.0.0:* LISTEN 25380/(squid)
    tcp 0 0 127.0.0.1:9050 0.0.0.0:* LISTEN 4071/tor
    tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 4071/tor
    tcp 0 0 127.0.0.1:58846 0.0.0.0:* LISTEN 5472/python2
    tcp 0 0 127.0.0.1:32000 0.0.0.0:* LISTEN 30205/java
    tcp 0 0 0.0.0.0:9030 0.0.0.0:* LISTEN 4071/tor
    tcp 0 0 ::1:631 :::* LISTEN 4073/cupsd
    tcp 0 0 ::1:8888 :::* LISTEN 30205/java
    tcp 0 0 ::ffff:127.0.0.1:8888 :::* LISTEN 30205/java
    tcp 0 0 ::ffff:192.168.1.1:8058 :::* LISTEN 30205/java
    tcp 0 0 fe80::215:afff:fe0:8058 :::* LISTEN 30205/java
    tcp 0 0 :::6600 :::* LISTEN 4022/mpd
    tcp 0 0 ::1:9481 :::* LISTEN 30205/java
    tcp 0 0 ::ffff:127.0.0.1:9481 :::* LISTEN 30205/java
    udp 0 0 0.0.0.0:51774 0.0.0.0:* 5472/python2
    udp 0 0 0.0.0.0:631 0.0.0.0:* 4073/cupsd
    udp 0 0 0.0.0.0:4827 0.0.0.0:* 25380/(squid)
    udp 0 0 0.0.0.0:43802 0.0.0.0:* 25380/(squid)
    udp 0 0 0.0.0.0:3130 0.0.0.0:* 25380/(squid)
    udp 0 0 0.0.0.0:3401 0.0.0.0:* 25380/(squid)
    udp 0 0 0.0.0.0:44777 0.0.0.0:* 5472/python2
    udp 0 0 :::56760 :::* 30205/java
    udp 0 0 :::5582 :::* 30205/java
    udp 0 0 :::8008 :::* 30205/java
    udp 0 0 :::8008 :::* 30205/java
    udp 0 0 :::1900 :::* 30205/java
    udp 0 0 :::1900 :::* 30205/java

  • Theft of phone and skype account still being used!...

    Hi.
    My wifes phone was stolen on th 19th of April during a camping trip.
    We reported the theft to the police.
    I have gone onto skype today, and the account is still being used.
    My wife said the only two places skype is installed is on her stolen phone and on her laptop, which isn't on at the moment as she is at work!!
    So whoever stole the phone is using the skype account right now!!!
    I need to find out the IP addresses that have been logged against the user [Redacted for privacy] since the 19th of April.
    I have tried to email support, but the contact form keeps giving an error, so please someone respond as soon as possible so I can relay info to the police please!!
    Kind regards,
    Glenn.

    Hi, Glenn, and welcome to the Community,
    These two commands, when entered into a chat window, may prove helpful:
    /remotelogout
    Sign out all other instances except the current one. This will also stop push notifications on all other instances.
    /showplaces
    Lists other instances where this Skype name is currently signed in.
    Important: Always make sure you are using the latest version of Skype. Some of these commands may not be supported in older versions.
    Here is a link to the original FAQ article:
    https://support.skype.com/en/faq/FA10042/what-are-chat-commands-and-roles?
    If your wife still has access to her account, she should consider signing on to her account details and removing any saved payment methods on file. 
    Skype does not release IP addresses except upon request from law enforcement agencies, who can file to receive this information via official channels.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Still being Deluged with unrelated emails

    After asking how to get my Sony PRS-T1 recognized by ADE. I am still being Deluged by emails unrelated to my question I did receive a sugestion to modify my preferences, which I did. I turned off responce by email, am still getting email which is clauging up my InBox. How do I make this STOP?????

    Tried that... Also tried sending to the original email, since I had just changed it to something recognizable a short time before. Currently failing with the email authorization on or off. Here's the latest message:
    Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 5.7.1 Command rejected (state 18).
    Thanks for helping... :-)

Maybe you are looking for

  • How to configure Free of charge posting to cost account and not to balance?

    Hi, If we post GI for a free of charge delivery (sample) the following will be posted: Cost of Sales 100 Finished goods 100 But we do not want to post to Cost of Sales but to a cost account. What do I need to change? Regards, Eric.

  • Extensions for Flash Pro in CC?

    I tried to open the Exchange using Window > Extensions and the only thing I see is "No Extensions Installed".  Next I tried the link on the welcome screen and just got a web page that said click here for CC users only to find that Flash doesn't get E

  • Apple dealer locator in Asia?

    This isn't the best place to post this, but I don't see any better options; I want to buy an iMac in Vietnam; I understand there's a certified dealer in Ho Chi Minh City; I'm looking for one in Hanoi. Is there a web resource for locating a legitimate

  • Update PR delivery date via CN22

    Hi all, I'm looking for a way to change the PR delivery date from CN22. I managed to update via IW32 using user exit 'EXIT_SAPLCOZF_002', but couldnt find an equivalent exit for CN22. Have also tested using BAPI_REQUISITION_CHANGE but it locks the sc

  • Can I print report to a printer thru report server?

    If I use a report server and run the application thru browser, can I print the report to a print thru report server? and How?