TS3988 please help i upgraded my iphone5 to new ios7 yesterday 2pm and untill now its already 17hours and why cant access or back to normal?is this normal or stil upgrading? it only appears the apple logo on screen and keep coming the logo screen on and o
please help i upgraded my iphone5 to new ios7 yesterday 2pm and untill now its already 17hours and why cant access or back to normal?is this normal or stil upgrading? it only appears the apple logo on screen and keep coming the logo screen on and off.do i need to bring my phone to apple center or is this iops 7 takes longer time or an hours to successfully upgraded.please help me what can i do?
Anyone have any suggestions? or is everyone else just as clueless as me !
Similar Messages
-
My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.
I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
Very frustrating, hope someone else has some ideas!
PS My MacBook was about same age, and "expired" in exactly the same way as yours. -
Why does the apple icon come on then off then a white screen appears?
Why does the apple icon come on then off then a white screen appears?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
hi, i've just bought my first macbook pro, i just installed office mac and when i open the page i cannot see the minimise maximise and close buttons as it's hidden behind the apple menu bar, also when it's at full screen, those buttons do not appear
Try to edit the size of the page using the sides of the page, or if you are desperate, force quit using command-Q. In full screen put your cursor on the top of the page, and the menu bar will appear. If it doesn't keep "pushing" it up until it does. Hope this helps!
-
I have Mac Pro 2010 model and it's giving heavy fan noise,so run the Apple hardware test but it's showing the Error: 4SMC 1 40000000 please help me in this issue.
Same error information here.
https://discussions.apple.com/message/13083664?messageID=13083664 -
Why i Can't activate my iphone just because idont own the apple id i dont ever know how the email is even a password that make no sens apple please help me i will tell you my model my FCC ID , IC and IME
If the phone was previously owned and is locked to that owner's Apple ID the ONLY way you can activate it is to get that person to release Activation Lock. This is an antitheft feature of the phone; stolen phones are useless.
If you purchased the phone new you created the Apple ID, and will have to remember it. If it is only the password you have forgotten go to https://iforgot.apple.com -
my iPhone fell in the pool, I tried the whole rice thing. & It seems to only turn on show the black screen with the apple & some white lettering on top of the apple. What else can I do to get my iPhone to work again?
Time to take it to Apple and pay for an out of warranty replacement.
Allan -
"Only files in Apple Loops format will be shown in the loop browser".
I recorded a Drum loop from my Korg m50 workstation into logic pro 9.
After recording i tried to import that loop into Apples loop library. After doing so i get this message.."Only files in Apple Loops format will be shown in the loop browser."
What do i do?
Please help.
Thanks
RohanI've recently gotten this error when I try to drag an audio file into the loops library (to create an apple loop.)
Comes along with Result Code=-43.
I'm trying to quantize some rhythmic loops using flex, then turn them into apple loops for the library.
My process:
Take original audio.
Flex it using slice mode.
Bounce in place.
Drag new region into Loops browser.
Errors ensue. -
I am going through startup on Macbook Air 11. When I get to the "Sign in with Your Apple ID" screen, I keep getting the message, "Couldn't sign in because of server error." I am connected to wifi. Any ideas on how to proceed?
Hello KathyBrust
Check out the article below to go over a few troubleshooting steps with issues connecting to iCloud. If you are still stuck, there are other resources to get a resolution.
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
Regards,
-Norm G. -
Hello!, I´m new using apple products. I added som pics to My Photo Stream/Uploads on Windows and only appear on Apple TV. I want to see them also in my iPad and iPhone. What I need to do?
Set up the same iCloud account in Settings>iCloud, then turn photo stream to On.
-
Can someone please help? Recently just had my iPhone 4S reconnected. I've now waited the 24 hours that you need to wait till everything goes back to normal. However on a phone call I can hear whoever I'm calling but they can't hear me?
i had the same problem a few weeks ago and i had only had my 3g iphone for a few weeks. It was as if i was on permanent mute. I could hear others fine, but they couldn't hear me, even if i used speakerphone or even a bluetooth.
i took it to an apple store and they did a real quick test (they first did a system restore, then they took my phone and tried calling another employee). Once they validated it wasn't working, they replaced my phone quickly with no questions asked. Just make sure to back up everything on I-Tunes before you go in so that you dont lose any info. might want to do the restore before you go in, as well, otherwise you'll have to wait for them to do it at the store, which takes them 15 mins or so.
Hope this helps. -
My email account is invalid to access, please help me to connect to a new right email address. This is urgent for the pre-order process, please respond as soon as possible.
<Email Edited by Host>This is a user-to-user technical support forum. No one here can help you.
Try
https://expresslane.apple.com -
I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs then stops again!!! still annoying.
Can anyone assist me with this issue?
ThanksTo downgrade, you'll need to download the previous software version here: ATV3 http://appldnld.apple.com/AppleTV/041-4361.20120605.grjot/AppleTV3,1_5.0.2_9B830 _Restore.ipsw
ATV2: http://appldnld.apple.com/AppleTV/041-4362.20120605.t8i4U/AppleTV2,1_5.0.2_9B830 _Restore.ipsw
Next, plug the Apple TV into your computer with a micro-usb cable (most phones today use these) and start up Itunes. It should detect the Apple TV in recovery.
After that, hold down Option on Apple or Alt on Windows and click Restore. This should open a window that allows you to select the software update you want to apply. Select the one you downloaded earlier.
It will then go through the restore process, which takes only a few minutes, and then you will be able to plug the Apple TV back in to your display and set it up again.
I recently ran into a similar issue with a bunch of these things and after restoring them all to the previous software version they are working again. -
When trying to install new App. The Apple ID shows my old one not the new ID which is verified. Please advise
Go to Setings>iTunes and App stores and make sure you are signed into your account
-
So why doesn't the new software upgrade the Apple TV to 1080hp...from the 720hp? Do I have to buy a new Apple TV to get that Upgrade? Mine is only about 2 months old! Very frustrating if thats the case!
If you want 1080, you will need to purchase the new Apple TV.
Maybe you are looking for
-
How do you programmatically change an image in DataGrid cell
I have a DataGrid which contains a status icon. I have been able to get the initial status icon to show in the DataGrid. But I am unable to update the it. I basically need to update the image for a selected row with either a 'assets/processing.png',
-
Migrating from one imac to another, it is down to 1 minute remaining but not moving beyond
migrating from one imac to another, it is down to 1 minute remaining but not moving beyond after 20 minutes
-
Plz help the scenario..i am a new bee to obiee
i have a scenario i have a dashboard which contains 2 objects 1)dashboard prompt( which contains year values ) 2) report (year and sales as columns) what my question is when i select a year in prompt how i want the result is i want CURRENT YEAR DATA
-
I am thinking about creating a logical 10gR2 standby database from my OLTP 10gR2 database to be used as a reporting database. In the OLTP database, there are triggers that perform auditing on certain tables. Should I disable these auditing triggers i
-
i'm trying to call a bean in jsp in order to open a file exists in the same machine as tomcat. but it seems not work properly for no modification occurred to the file after operation on it. the sample code is shown below: <% com.genesys.FileOpr fo=ne