TS3989 i recently updated ios software to ios6 beta 4 and lost a lot of photos from photostream from my iPhone, how do i recover these as they are still in my iPad?
having had trouble updating to iOS6 Beta 4 i lost a load of photos off my iphones photostream, now they are still in my ipads photostream but i cant figure out how to recover them onto my iPhone. Any help would be fantastic guys and gals
ipadal wrote:
im not disclosing anything
Yes you are
just want some help
You're not going to get any
Similar Messages
-
When I run the Dr. Fone software it shows they are still on my iPad 2 but it costs 60-70 dollars. Is there another way to retrieve them? They were not backed up on Itunes like I thought they were. Please help!!
Recover software as you have described is pretty much your only option - keep in mind that if wait, some of the currently recoverable data may well be over-written and lost.
-
lost my pictures and some apps with update. how can iget them back?
Sync with iTunes to recover these things.
Connect the iPad to your compter and launch iTunes. Select the iPad on the left side of iTunes and then click on the Apps tab. Go down through the list and select all of the apps that you want to put on the iPad. Do the same thing with the photos. Make sure that the headings - Sync Music and Sync Photos have been selected and then sync again.
If you have changed the configuration - you will have to click on Apply in the lower right corner of iTunes. -
I can not send or receive emails
Hi there karmin9,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
-Griff W. -
I updated iPhoto 4 with iPhoto 5 and lost all my photos!
I updated iPhoto 4 with iPhoto 5 and lost all my FRICKIN photos! Anyone else have this problem? If I do a search for img_ I do get about 3800 photos, so they do still seem to exist in various locations with multiple duplicates and/or photos that are different but have the same name. I know if I try moving them all to one location I'll get the message "Do you want to replace?" many many times. Any suggestions?
Mike
This document
http://docs.info.apple.com/article.html?artnum=107947
will help recover the situation.
Regards
TD -
Okay so,i recently updated my software ios 6.0
I recently updated my software ios 6.0 and all of the sudden i get facebook and twitter notifications coming in but its not making a sound. This is really upsetting because i'll never know if i get one unless i go and acually look... Okay so my push notifications arent making sounds at all... ;( Any help? This is really a big thing to me, and im sorta hoping others are going through the same, because i'll know something must be going on. If you could help that be a blessing!
Thanks -TiffanyI have tried another SIM card and the problem still persists. I have made an appointment at my local apple store. Thank you for your reply.
-
Hi, Im using an iPhone 4 8gb and recently updated my software using my computer to iOS 6.1.3 and some of the tabs are now grayed out and cant function (specific reference to "Show My Caller ID - On/Off tab"). is there a way to fix this or can i downgrade back to my default software?
Hi imobl,
Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff. -
i wsa update my iPhone 4 ios 7.1 software to ios7.1.2 with out contacting to my pc or i backup it ( updated by wireless) when i'm waiting the verify restart my phone and asked me to join my iPhone with pc by cable and i lost a lot of photos from photostream from my iPhone 4, so how may i recover these photos. please help...
ipadal wrote:
im not disclosing anything
Yes you are
just want some help
You're not going to get any -
I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this
You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4) -
I updated my software to iOS6 and now my phone won't automatically join known wifi networks even though I have it on. It goes back to 3G every so often when I'm at home instead of using wifi, and each time I ask to join it asks for my wifi password
Try this for your home Wi-Fi:
On your iPhone, Settings > Wi-Fi > select your home network > "forget this network"
Power down (unplug) your wireless router
Restart your iPhone
Plug in your router
Re-join that network
I don't know if this simple technique will fix it for good but try it. There is a long thread about this problem here: iOS 6 WiFi Disabled -
I Recently updated the software on my MacBook Pro. Now, my computer no longer recognizes my external hard drive. Could this be related to the software update and, if so, how do I correct the problem?
Ari343 wrote:
No, the external hard drive does not show up on Disk Utility. I don't have another computer to try it on.
Perform a PRAM reset:
http://support.apple.com/kb/ht1379
Have you tried all the ports?
Have you tried with a different cable?
Have you tested all the ports with other devices to see that they are functioning?
Ciao. -
None of the above have worked. Ipad completely bricked. This began when merely updating IOS software as instructed. Now Apple want to charge me for using their crappy software as directed. Surely this is not only immoral but potentially illegal.
Read: iPad Troubleshooting Assistant
That procedure eventually leads you to the need to restore it.
Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. Be patient since it sometimes takes several of these attempts before you are successful.
If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the iPad in iTunes and choose "restore from backup". This assumes you have a backup. If you do not, you will have to download all your purchased iTunes content again. You do not have to pay for anything you already purchased.
If you still can't get it to work, you have done all you can and only Apple will be able to help. -
I have an iPhone 4 and recently updated the software. Since then, the screen will not turn off consistently after the 1 minute auto-lock. How do I fix this?
Settings>General>Auto Lock
-
recent update of software crashed. Now hwen i try to open i tunes, i get message "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem" - It has not!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99750) -
i cant update ios software to my ipod touch..it is interrupting while downloading...how to resolve this issue?
Did you check your security software settings? iTunes for Windows: Troubleshooting security software issues
iTunes has to be able to contact Apple during the process.
Maybe you are looking for
-
Moving custom default portal from 1.1 to 1.2
Is there a way to capture or backup the html & image files from a custom default portal in ISE 1.1 to be able to move it to a fresh install of ISE 1.2. Would it be in the backup somewhere?
-
Filer view for combine request
Hi , can any one help me to get filter views for combined request reports. As normal, when we use filter view with combine request then , it doesn't show us what value we have selected in dashboard prompt. so i need alternate approach, for showing da
-
Why notify() and notifyall() is in Object class
pls help me why notify() and notifyall() methods which are related to thread are define in Object class,instead of defining in Thread class
-
Operating System Authentication in Windows
Hi gururs, How to turn on Operating System Authentication in NQSConfig.ini file? I could not find it in the documentation. Thanks Laszlo
-
Procedure for creating Inbox views
HI All, Could you please let us know the procedure for creating new Inbox view in BPM 11g. We have an option to create my Views / Sharing Views in 11g but how we can put that under Inbox views. Thanks, Aravind.