TS3989 my photostream on my ipad doesn't receive images from my windows 7 pc icloud photostream

my ipad syncs images to my pc photostream but my pc is not syncing to my ipad photostream. Both are set with the same id

Hello dkphoto,
You may need to verify that images are being place in the correct directory.
iCloud: Set up Photo Stream
http://support.apple.com/kb/PH2605
By default, photos are automatically downloaded to the My Photo Stream folder inside the Photo Stream album in your Pictures library, and uploaded from the Uploads folder inside the Photo Stream album in your Pictures library.
If this doesn't resolve the issue, the following article may be helpful.
iCloud: Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Cheers,
Allen

Similar Messages

  • IPad doesn't receive all text messages

    iPad doesn't receive all text messages

    An iPad can receive iMessages only, not text messages as in SMS/MMS.

  • My Ipad will not receive signal from new home Xfinity modem.  I reset Pad but still doesnt work.

    My Ipad will not receive signal from new home Xfinity modem.  I reset Pad but still doen't get WIFI

    Does it not show the presence of a wifi signal, or just not connect?
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Any ideas of how to receive images from a wireless camera (2.4 ghz) to my ipad rather than the handheld DVR supplied?

    Any ideas of how to receive images from a wireless camera (2.4 ghz) to my ipad rather than the handheld DVR supplied?

    some of those often have webserver so one just navigate to it using a browser

  • HT4101 I discovered a fatal flaw in the iPad procedure for downloading images from camera to iPad: after selecting the images to be downloaded, an accidental touch of the "delete" button, wipes all selected images from the camera, with no warning?

    After downloading some 60 images from camera to iPad, I was "scrolling" down to select the last images, and inadvertently touched the "Delete" button that appears at the top right of the screen, when the "Select" option is chosen. I did not notice the warning "Delete 60 Images?", and continued scrolling down, when my finger touched the warning message. All my precious images were instantly deleted from the camera The sensitive touch screen feature makes this a real problem. Apple should "fix" this unacceptable feature, surely! I suggest that the images on the camera memory card should not be able to be deleted from the iPad, and this shpuld require to be done using the camera controls only. Similarly, the "Delete" or "Keep" options that appear after importing a selection from the camera, should NOT allow the images on rthe camera to be deleted, but only the imported (downloaded) images on the iPad. This unnecessary option could easily delete precious images from the camera!
    Apple should remove the option to delete images from the camera, and the iPad touch screen commands should olny delete images on the iPad. (Alternatively, the "delete option should be on a separatly accessed "page".)
    Surely enough users of the "Lightning to USB Camera Adapter" will agree with the above?

    No, I don't agree. Whenever you connect a camera to a computer you are given the opportunity to delete the photos on the camera after downloading in precisely the same way the iPad does this. The fact that you touched Delete and then ignored the Warning doesn't change anything.
    I've loaded thousands of photos on my IPad and never have had that problem.
    Don't blame a moment of carelessness on your device.
    If you want to make such a suggestion to Apple use http://apple.com/feedback

  • Preview doesn't display images to fit window

    I'm running OSX 10.6.8 on a 27" iMac, and when I enlarge the Preview window to fit the screen (by dragging the corner), the images don't enlarge. They seem to be stuck at about 1920 pixels wide (at a guess) instead of 2560 wide. I can zoom in, but I want the images to exactly fit the window. Preferences > Scale large images to fit window doesn't work, neither does View > Zoom to fit (which is grayed).
    Any suggestions as to how I make images fit the window?

    Hi, Guy Burns,
    What is the resolution of the images you try to enlarge?
    My guess:
    If the resolution of your images is lower then 2560 wide (your screen resolution), the window will open with the exact size and resolution of the picture (for instance 1920 wide). i.e. One pixel on your screen equals one pixel of your picture.You can indeed enlarge the window and zoom in, but then you are enlarging pixels, the image will get less sharp.
    The "Scale large images to fit window" function, is meant for "large images" as the name implies, so images with a larger resolution then your screen resolution. With this function, you can reduce the size of images that would otherwise not fit entirely on your screen, to the necessary size to view the whole picture as big as possible. So this function does not work if the "scale" is 100% or more.
    In slideshow mode however, there's a function to automatically adapt the size of smaller images to "full screen", and also "quicklook" (spacebar) supports full screen mode.

  • My iPad will accept downloaded images from my camera, but will not allow me to move the images to a thumb drive, with the message that those devices require too much power for the iPad.

    Using an older, second-issue iPad, I can download images into it from my camera. I cannot move them out of the iPad into a thumb drive. The message I receive is that the thumb drives require too much energy to make the transfer. What can I do?

    Thats how its designed. in order to export your images or videos, the best method might be by connecting the iPad to your computer, or directly to the thumb drive connected to your computer, not to the iPad. Then is as simple as drag and drop. The other method could be sending them by email or uploading via a cloud service but that will take more time do get it done.
    Hope this helps.
    Alex

  • TS2755 iPhone 5 on ios7 doesn't receive messages from other iPhones when data is turned off

    My iPhone 5 doesn't receive iMessages or texts from other iPhones when my data is turned off, obviously I do not expect to receive iMessages but I also cannot receive text messages. Text messages can be sent but not received. Text messaging to and from people with androids and blackberries is fine.

    That is because iPhone users would be sending you iMessages. The only time you would receive them as a text is if they have theirs turned off, or it is set to send an SMS if iMessage fails. At some point you had iMessages activated, and if so, that is how the iDevices will send to you.

  • IPad has stopped receiving email from mail app I use yahoo can log in thru safari but app has not received email since 3/10/15

    ipad has stopped receiving email on mail app

    Try this...
    Double-click the Home button
    Swipe left or right and find the Yahoo Mail app
    Swipe up on the preview of the Yahoo Mail app to force quit it
    Hold down on both the Home AND Sleep/Wake buttons until you see the Apple logo on black screen (about 10 seconds).
    When you see the Apple logo on the black screen, let go of both buttons.
    After it restarts, launch Yahoo Mail and see if it works.
    Hope this helps!
    ~Joe

  • My iPad doesn't receive email

    My iPad has suddenly stopped receiving emails but I can still send them.

    One thing to try is to go into the settings, delete then re-add your mail account info.
    If that doesn't work, who is your mail provider? If it's yahoo, they've been having issues for quite some time. If it's Yahoo, read this and see if they help.
    https://discussions.apple.com/message/27906475?ac_cid=tw123456#27906475
    https://discussions.apple.com/message/27894621?ac_cid=tw123456#27894621

  • Cannot send or receive email from laptop or desktop using icloud.  Iphone and ipad work fine.

    My mail server on my laptop and on my desktop are basically useless.  My ipad and iphone seem to be working fine. 

    The laptop seems to have been fixed by the fix listed.  My desktop, however, still is unable to receive or send mail. 
    this is the message I am receiving.
    There may be a problem with the mail server or network. Verify the settings for account “iCloud” or try again.
    The server returned the error: Mail was unable to connect to server “p99-imap.mail.me.com” using SSL on port 587. Verify that this server supports SSL and that your account settings are correct.
    thanks so much

  • Envy 23 all in one Win 8.1 bluetooth doesn't receive photo from phone

    Trying to upload a jpg file from my phone to my windows 8.1 Envy 23 All in One via bluetooth.  The PC and phone pair up ok and phone shows it is sending.  When the phone starts sending, the PC's bluetooth device status changes from not connected to connected.  After about a minute, the phone says the transfer failed and the PC status goes back to not connected.   The phones error message says request could not be handled correctly.  Also, the bluetooth icon window doesn't ever include selections to receive file or send file.  HP Support connected remotely, reinstalled the bluetooth driver, deleted the device, paired up again, but no change with the transfer.  HP concluded it is a hardware problem and says to send the PC in for repair. (Still under warranty.)  Doesn't sound like hardware to me, and I don't want to be without my PC and possibly have to reinstall all programs and data when it returned. Thinking of getting a cable to connect directly to the PC.  Any ideas what might be wrong?

    Hi,
    Open up Bluetooth settings ---> Share and make sure that box to Allow remote devices to browse, send and receive pictures, music and other files is checked. The click on Open Bluetooth Exchange Folder -->right mouse click for properties, Share and the review your exchange settings.
    Check the Permissions on the above image so that your know for sure what you are allowing for transfer types etc..
    It is possible that the WIFI adapter is failing during a transfer process if the software is properly setup.
    Be patient and Bluetooth transfers can be slow.
    You should get a notification on the PC that the file was successfully received.  Additionally, your phone should be indicating an up transfer.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Emptying Aperture trash doesn't remove images from library

    Not sure what's going on.
    Did a little house cleaning over the past few days and deleted about 2K images overall. And I emptied the aperture trash. The number of files in the program goes down. But the size of the library doesn't change. The date of for the library does change and shows the current time.
    I archived all my images to an external vault. That vault is significantly smaller than my library.
    Then I upgrade to the new version 3.1.2. Deleted preferences.
    I created a new library as a test. I imported 188 images. Then deleted a few. Emptied the aperture trash. The number of images went to 152.
    The size of my library remained unchanged. No aperture images in main computer trash can. And when I go into the masters folder in the library I see all 188 images there.
    System: mac pro 2006. OS 10.6.8

    Thanks for taking the time to reply.
    I don't remember which version I upgraded from. But the problem was there in the old version as well as the new one.
    I did do the repair rebuild just before upgrading with only a 0.1GB difference in file size afterwards.
    And, as I said, when creating a brand new library with only 188 images the same problem occurred. So 2 separate libraries on the same drive.
    I just created a new library as a test on my main drive (a different drive) with the same issue. Files are deleted in the program but not in the library.
    There is no problem with the trash in any other respects. Other files have been deleting just fine.
    The aperture deleted images aren't even reaching the trash can.
    I might need to reload aperture.

  • Why doesn't downloading images from chrome show up in my finder?

    It's happened every since I had this computer. I would download a file, most often an image file, doesn't matter if it's jpg, png, or gif, but it wouldn't show up whenever I looked for it in the finder. Is there a certain setting I have in place that is causing this? I don't know what to do. When I change my desktop background, however, I can see all the images I've downloaded from chrome, but I just can't seem to view them in the finder. It's really weird. Anyone have this problem?

    Check the downloads location.
    https://support.google.com/chrome/answer/95574?hl=en

  • How to receive messages using my iPad number than receiving messages from email

    HOw do I receive messages using my iPad number not my email address

    You are probably going to have to sign out of/turn off Messages on the phone and the iPad and then start all over again and enable messages on the phone first so that the number is accessible again to use on the iPad in Settings>Messages>Send and Receive at>You can be reached by iMessages at. You need to be able to select your phone number in there.
    This kb article explains it in detail.
    http://support.apple.com/kb/HT5538

Maybe you are looking for

  • Query on Integrated Windows Authentication....

    Hi All, I have a scenario to implement Integrated Windows Authentication using SPNego. But the initial page has to be loaded as anonymous portal onclick of the Logon button/Link, it has to validate the user against Integrated windows authentication a

  • WLC 5508 and associated AP's

    Hi, I have a problem with a poor signal. I have two WLC 5508 and 10 ap's 3502. So, that I have two wlc on the network I decided to divide this 10 ap's. WLC 5508 has 7.0.98 software version. The 5 first ap was associated to one wlc and the other 5 to

  • How to kill JVM in browser?

    Hello I'm developed an applet if user got out from paget and return befor jvm has cloased, the applet is not play as well I want to kill the JVM in browser Thanks.

  • Next Number Maintenance - IncrementBy is used for what?

    Hello everybody, as I'm developing a webservice I've used the "IncrementBy" of my next number template as the value which is added to the current sequence of the number. Let me provide an example: The current sequence is 1 The IncrementBy value is 6

  • BR*Tools Studio assistance / feedback

    Hello All, Those of you who are trying out / playing with the new SAP DBA tool (BR*Tools Studio), please place your experience in the forum. I have installed BR*Tools Studio on a development instance in a dedicated server mode and trying to get hang