TS3992 Back up from third party emails

Hello all,
Could you pleae tell me how to back up my emails? I want to be able to back up my work ones that are kept on a remote desktop (Microsoft Outlook), personal ones kept on my laptop at home (Microsoft OutlooK).
Hope you can help.

Rosalyn,
The current version of DW is 3.0.3 and you can download a free update from their web site. That said, it won't boot a new Mac (such as yours) unless you order the update CD from Alsoft for $12.95 + $7.95.
Here is the link:
http://www.alsoft.com/DiskWarrior/support.html#Update_Req
You can, however, put it on an external bootable drive and run it from there. That is what I do.
-Shawn

Similar Messages

Can not receive emails from third party email accounts

Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally.
This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
Thanks a lot!!
Sammy

Checklist for testing inbound email problems, I am assuming outbound emails works ok.
1. Check Port 25 forwarding on all modems routers/firewalls
2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
3. If using POP Connector Service, make sure POP accounts are created properly
4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

Sender RFC from Third Party System

I have a vendor who is actually communicating through RFC from third party Application to SAP R/3. Now we are trying have XI in between. Where as with minimal impact on both sides.
Solution.
1. Have the RFC made as ZRFC in XI. Let the vendor call the RFC in XI ABAP and internally make an RFC call through XI Interface to R/3 as Sync Interface. Because we need to report the information back to the system where the request initiated.
2. Have RFC INI file copied as SAP Suggests under one of the folders. Develop the regular RFC to RFC Interface via XI.
Is there any other alternatives other than the above mentioned solutions? Or out of those 2, which one will provide the best performance
Appreciate any feedback. Please advice

That's exactly what we are trying to achieve here. By Eliminating direct connection R/3, we are placing XI in between. But with the budget/timeline constraints from the Partner side, we are trying to have minimal change on the partner side. They might not change something to web service etc...
Here is the text about INI file
You can configure the non-SAP RFC client to connect to the sender communication channel in the following ways:
■ By defining the parameters PROGID, gateway-host, and gateway-service within the saprfc.ini-file using RFC-SDK.
■ By using appropriate parameters in the function RfcOpenEx.
If you use the saprfc.ini-file, the respective RFC destination has to be of type R.
All the parameter values used within the saprfc.ini-file or with the function RfcOpenEx should match the entries maintained within the corresponding sender communication channel.
Example for the saprfc.ini-file is as follows:
DEST=RFCCLIENTEXT
TYPE=R
PROGID=P106646.HKExternalClient
GWHOST=pwdf2153
GWSERV=sapgw40
Please check the following link, for the same text on RFC Sender
[Help.SAP|http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm]
Using the same Sender RFC for non-SAP System, please share any ideas

For third party email users

AKA anything that isn't @verizon.net (ie @hotmail.com, @juno.com)
Verizon is blocking port 25, please check: http://www22.verizon.com/ResidentialHelp/HighSpeed/General+Support/Top+Questions/QuestionsOne/124274...
Reason: Most common email viruses are sent using port 25 to infect computers. Often times the user never knows their computer has been infected. In order to protect our customers, Verizon has turned off the ability to send email using port 25 for all users other than those using a @verizon.net email address.
They give some step by step instructions for anyone who are using a third party email here: http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup+And+Use/QuestionsOne/124333.htm
Just an FYI if your non Verizon email suddenly stops working in outlook, macmail etc. Simply change the outgoing smtp port from 25 to 587. You won't notice any difference.
Just thought I'd give everyone a heads up if you didn't know about this.

I have a non-verizon email account, and must run everything through the verizon server. I have changed the smtp port to 587, I have it marked to authenticate. The outgoing server is smtp.vzwmail.net I still cannot send email. I can receive, but not send. Can anyone help?

Accessing BW Query from Third Party System

Hi,
We have a requirement by which user can do the following through the third party system.
1. User will enter the Parameters in the third party system.
2. User will then call the BW Query with the above parameters from the third party system.
3. BW query should get execute based on the parameters (variables) and output to be displayed.
3. After displaying the output, the same should get passed into the db tables or the flat file to the third party system.
Ideal steps will be :
1. Enter the parameters in the third party system
2. Calling the query from third party system with the
parameters
3. Executing the BW query
4 Displaying the output and
5. Sending the output back to the third party system
Kindly advise how can we handle this scenario.
Regards
Ramesh Ganji

hi,
you can use third party etl tools. I used XtractIS for microsoft analysis services.
http://www.theobald-software.com/cms/en/xtract-is/xtract-is-plugnplay-mit-sap-und-den-ssis.html

Port 25/587 and third-party email account

Like many who have posted notes about the Port change and third-party email accounts, I have read everything related to these changes and still cannot figure out how to adjust my settings so that I can send email from my third-party email account. In June, I switched to Verizon DSL from a cable service, which was very slow. "Slow" is now looking a lot more appealing than not being able to send email through my third-party account.
I have a Verizon email account, which I use with friends and family. I have another account that I have had for over ten years. I used the latter account as my only account for many years and that is the email address on my business cards. I will continue to use the third-party account as my business account, so hopefully someone can walk me through the change process so I don't need to switch providers.
I use Outlook for all my email. What do I need to change so that I can continue to use Verizon to send all my emails?
My POP3 settings include User Information (my name as it appears to recipients and my email address), Logon Information (user name and password), and Server Information (Incoming mail server [POP3] and Outgoing mail server [SMTP]).
What should appear in each of these so I can send email from my third-party account? Let's say my third-party email address is [email protected] User information is then my name and my email address ([email protected]). Logon information is then what? My abc.net user name and password? My verizon.net user name and password? Some combination of these? How about the Server information? Is my POP3 relay.abc.net or incoming.verizon.net? (I think it's the former for incoming.) Is my SMTP relay.abc.net on Port 587? Is it outgoing.verizon.net on Port 25? Something else?
I know this is long, but I have really tried to follow all the instructions Verizon gives and I still cannot send email from my abc.net account.
Thanks.
Solved!
Go to Solution.

It really depends on whether your 3rd-party provider allows port 587 to be used. If they have a different alternate port you should be able to use that also. Verizon is *only* blocking port 25. Port 587 is just the default "other" SMTP port, so it's the alternate port for most providers, but not all. If you cannot get these settings to work, your other option is to set up Verizon for your outgoing server.
For the sake of example, we are going to pretend that we are setting up your fictional account. Using "[email protected]" as the 3rd party address and "[email protected]" and the password for logging into that account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
The settings for using Verizon's servers would be:
Incoming Server: relay.abc.net (or whatever your 3rd party server is) - For this server you set up everything according to your domain's settings.
Reply Address: [email protected]
Outgoing Server: outgoing.verizon.net
Server Requires Authentication: Yes
Username: fakeacct
Password: fakepassword
Requires a Secure Connection (SSL): No
Port: 25 (although 587 also works.)
These settings should work unless you have a Verizon/Yahoo account, in which case the outgoing server name is: outgoing.yahoo.verizon.net
Hope this helps. If you still have questions, please let me know.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Return to depot - original order from third party location to customer

Hi,
A return order has been configured for materials which have originally gone from third party location to customer location. During return process however the material is coming back to the depot, not the third party location. Now while trying to create an excise invoice after posting goods issue, the material is not showing in the list of excisable commodities. Please suggest a solution.
Thanks,
Kasturi

There is no concept called third party returns in standard SAP. Check this link where the same topic was discussed
[Re: Return Of goods in Third Party Process|Re: Return Of goods in Third Party Process]
thanks
G. Lakshmipathi

Third party email setup

ice successfully setup a third party email account on my iPhone(IMAP),but my phone can only receive mail. Whenever I try to send an email, it says that connection to the outside server(send.Columbia.edu) has failed. Any idwas as to why my ipjone is having trouble connecting to the outside server?
On a side note, is there an easy way to check how many txt msgs youve sent?

If you are connecting via AT&T EDGE, the connection will seem to come from an outside network. Your outgoing mail server may be rejecting your attempts to use it from outside its network.
You can use cwmx.com (no ID, no password) as the outgoing server. This will work whenever you are using EDGE to connect. However, this connection will not work if you connect to the internet using WiFi. AT&T's outgoing mail server does not allow you to connect to it from outside its network.
You can also get a free GMail ID and use their outgoing server information. GMail's outgoing server works from both EDGE and any WiFi network. You will need to add you personal email ID as an authorized "Sent From" ID in the Settings section of the GMail web interface, and use the "Other" mail account shortcut on the iPhone to configure your account. You can specify your IMAP server as the incoming mail server and the GMail SMTP server as the outgoing server.

How do I use Thunderbird to send third-party email through Verizon SMTP?

What exact settings do I need to select in Thunderbird for outgoing email in order send email? I have a third-party email address, not Yahoo or Verizon.
Based on other posts, I have set:
server name: outgoing.verizon.net
port: 587
CHECKED 'use name and password'
username: entered verizon username
use secure connection: 'no'
When I try to send email, I get prompted for password multiple times, then ultimately get "Send Message Error" - 'Sending of message failed. The message could not be sent because connecting to SMTP server outgoing.verizon.net failed...'

Your verizon.net password is not necessarily the same as your .com password. I have downloaded Thunderbird and tested send/receive using the verizon.net outgoing server and it works just fine, so it is something in the settings you are using.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

DMS document migration from Third Party DMS server(Omnidocs)

HI guys,
I would like to migrate document from Third party DMS server to sap DMS server.
What is the apporach.
1. The thir party dms server is protected with login name and password.
How i can extract data from the software.
Please spread your thoughts on this.
what is the function module to download the contents of the server. by passing the url.
with regards
Giri

use ALE scenario to send the documents

Incoming invoice from third party system

Hi All,
Could you please help in choosing functional module or bapi or badi's for incoming invoices that are receiving from third party system. I have no ideal about that but the SAP has to be loaded using idocs. what is the reason to choose the above ones
Thanks in advance for response.

Why not starting with docu?
The general process is explained well in help.sap.com
As a service, put this into your Google: vendor invoice edi site:help.sap.com

Help me! How to use it as a web service from third party application?

After using JDeveloper to develop BSSV object e.g. JP550010, how to use it as a web service from third party application?
TKS！

Obviously the OP is working on a project for the Bead Society of Southeastern Virginia http://www.bssv.org. Oh, wait, maybe he's researching the Blueberry Shoestring Plant Virus http://abbreviations.yourdictionary.com/bssv
:D
John

I bought a macbook air and iMac from third party with preinstalled ilife and iworks

I bought a macbook air and iMac from third party with preinstalled ilife and iworks, can I update to the latest ilife and iworks without being charged even though i did not purchase ilife and iworks on my preowned Macs. I have no CD's or license for those products?
thanks

No, you will not be able to do that.

Optimization in SCM from Third Party Logistics-Business ProcessOutsourcing

I am compiling an exhaustive list of SCM Optimization touch points from Third Party logistics business process outsourcing point of view.
Based on your experience, could you list out,
1) Third Party Logistics business process outsourcing touch points in the entire width of SCM
2) KPI's to Measure and Optimize at each touch points.

Few KPI's
- On time Delivery
- Response time
- Quality of WOrk
- Costing
- Profit at 3PL

Item master synchronisation from third party system to SAP

Hello ,
I would like to understand how we can desgin flow of data in case of changes in Catalog from third party system to SAP.
We have implemented Catalog functionality. Catalog maintained in third party system is accessed from SAP for procurement through catalog button.
Now we want to update SAP contracts when ever there is change in prices in third party system. In this we are also validating currency,UOM, delivery time etc.
How does we can make this synchronisation? What are the possible solution for this?
You valuable inputs will be highly appreciable.
Regards,
Prashant

Hi Neetu
you have to mainatin Item text and not for material PO text...
Do these settings:
SPRO->MM->Purchasing->PO->Texts for POs--->Define copying rule for item texts..
then check you should have a entry for "Item Text" if not then
Put a Consec no. and against it enter item text. then for this you have to maintain text linkage where u should have source object as Purchase requisition.
please confirm if these settings are already there?
regrds
yogesh

TS3992 Back up from third party emails

Similar Messages

Maybe you are looking for