TS3992 I tried to open a document on pages and it says: " document can't be opened"

I tried to open a document on pages and it says: " document can't be opened" it happned in all of my devices and I' m connected to a wi fi internet

I tried to open a document on pages and it says: " document can't be opened" it happned in all of my devices and I' m connected to a wi fi internet

Similar Messages

  • So I've been trying to open some Microsoft Word Documents and it says it can't be opened because PowerPC applications are no longer supported. What do I do about this?

    So I've been trying to open some Microsoft Word Documents and it says it can't be opened because PowerPC applications are no longer supported. What do I do about this?

    Workarounds:
    1.  Restore the OS X that you formerly used to run Word 2004;
    2.  Partition your hard drive or attach an external hard drive and install Snow Leopard (and Rosetta) so that you can "dual-boot" into Microsoft Word 2004;
    3.  Upgrade to Word 2011 or use an alternative program; or
    4.  The solution I use: Install Snow Leopard (and Rosetta) into Parallels 7 or 8:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439

  • I've been working with documents in pages and recently downloaded word for mac. i open the pages documents and they appear to be corrupt. at least, a lot of the font is now in weird boxed pictures. what do i do?

    I've been working with documents in Pages and recently downloaded Word for Mac. Upon opening Pages documents with Pages, the documents appear corrupt. Much of the font has been replaced with boxed little pictures - yet they are identified as times new roman. What do I do?

    You got the new iphone?????   I have same problem.  I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was).  Have you found a solution?????   I even tried to change import settings on format transfer but hasn't worked. 

  • I am trying to buy gems for my games and it says purchase can't be completed. Already I redeem iTunes card. Pls help

    I am trying to buy gems for my games ant it says purchase can't be completed. Already I redeem iTunes card.. Pls help

    If you are also getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I am trying to install Lion on my imac and it says it can't make a recovery disk

    I am trying to install lion and receive a message saying it can't make a recovery disk.  I am using a 2.33 GHz Intel Core 2 Duo iMac.  I do have bootcamp on it, but was never able to install Windows.

    What happens when Lion installs is it creates a Lion Recovery Partition at the very bottom area of the drive, this is used to Command R boot into and perform Disk Utility Repairs and reinstall Lion from Apple's servers much like a 10.6 disk will.
    So when you ran the Lion installer, it couldn't create this small partiiton, either because the GUID partition table (the map of your paartitions on the drive) is borked or there is data all the way to the bottom of the drive or OS X thinks there is.
    You set up the bootcamp parittion, so run that and delete the Bootcamp partition as your not using it or Windows, once it's finished reboot and try installing Lion again.
    I should warn you, Lion will not run your Rosetta based software or hardware drivers for external hardware, you may have to purchase all new versions. Not only that, hardware drivers may not be available for 10.7 thus rendering your third party printers, scanners etc useless.
    Before you install Lion, you should consult this web page
    http://roaringapps.com/apps:table
    to see if your current programs will break and when to expect a new version (likely paid)
    Also you shoudl check your hardware and the makers site if there is a 10.7 compatible driver/software for them.
    And once you think your ready to go to Lion, get a blank external powered drive and a free/donationware copy of Carbon Copy Cloner to clone your present (non-Filevault) 10.6 boot drive to the external drive.
    Later if 10.7 doesn't work for you, simply hold the option key and boot off the 10.6 clone, use Disk Utility to Erase the entire drive (the whole drive!) and reverse clone 10.6 back onto the internal drive.
    http://www.bombich.com/get_ready_for_lion.html

  • Hi i have been using pages but i recently opened maybe 7 individual pages and now no text appears. when i open a saved document in pages, it says the no of words it has but there is no visible text

    i am unable to view text on my pages documents. even when i open saved documents it states how many words are there but no text is visible. this all happened after i pressed the pages icon 7 times in a row.
    also now whaen i open pages several flip acreoss the screenalthough i previously closed them all

    Retina display?
    Jerry

  • When I try to open a pdf billing statement it opens a blank web page and does not download the pdf or open its reader. Why not?

    I click on a link to download last months billing statement for say my phone provider. A new web page opens that is blank. The pdf file that is supposed to download and open up in Adobe or other PDF reader does not show up or open up.

    You can open with any of the following (if they are installed on your ipad) by tapping on the PDF file
    1. iBooks
    2. Adobe Reader
    3. GoodReader
    4. Quickoffice
    5. And many more

  • Trying to upgrade to 3.6.8, and it says I can't because I "don't have access to some of the items. What in the world does this mean, and what do I do?

    I'm on a new Mac Mini running 10.6.4, bought in January and loaded with what I assumed was the latest version of FireFox--what I have is 3.5.2. I know I upgraded at least once since January
    When I try to download 3.6.8, it says that I "don't have access to some of the items."
    I don't think I've downloaded any plug-ins or anything that should trigger this. I have done a bunch of the standard upgrades that Microsoft incessantly sends out to fix problems in the Office suite. Haven't added any new applications. Can't figure out the problem. HELP!

    Hello.
    Try this:
    - uninstall your current version of Firefox (no data will be lost)
    - delete it's Firefox install folder (not your profile folder)
    - install the new version
    That should circumvent this problem. If you can't delete your Firefox install folder, after having uninstalled it, maybe it's because some of the files are locked. Try rebooting the system. If that doesn't help, ask Apple for support.

  • Installed photoshop on 4 computers years ago...they all got replaced before we deactivated it...now I am trying to reinstall on a new computer and it says it can't be registered to another computer...HELP!

    I need to get it installed on a new computer but it says I can't register it without deactivating it from another computer first.  Only problem is all of the computers it was registered on are dead now.

    Every time I go to that page it tells me to try troubleshooting, when I select what I need help with it loops me right back to the support page again and tells me to try troubleshooting.  So frustrating.  Adobe should seriously have a phone number people can call.  This is ridiculous.  I want to talk to someone not search online endlessly for hours.  Ugh.

  • Why do several files open when I launch Pages and Numbers

    Why do several files open when I launch Pages and Numbers

    2139Mike wrote:
    Why do several files open when I launch Pages and Numbers
    Mike,
    Any document left open when you Quit the application reopens when you restart the application. Rather like the jacket that I neglected to hang up when I came home last night. It's still lying on the chair by the door.
    Jerry

  • Can't Open a Keynote Presentation - Says "Presentation Can't be Opened"

    I have one presentation . . . The one I need next week.  HA!  I was halfway through creation - Went back after a meal, tried to open . . . Box Popos Up says, "Presentation Can't Be Opened"
    Any help would be apprecieated.
    I tried: 
    Shutting down the program via double click and swipe close
    Copying (same thing)
    ReStarting the ipad
    Resetting the ipad
    THANK YOU FOR ANY HELP

    You'll need to Compress or Archive the file before attempting to FTP. FTP files are actually "folders" with all the info needed to recreate the presentation. Because where you're FTP-ing to probably won't understand how this file system works, it's best to Right-Click on the .key file then choose "Compress" or "Archive" and send that .zip file that gets created.

  • I am trying to open a recent document in Pages. It says I need a newer version of Pages to open it. When I try to install newer versionit says I already have pages and this computer (Mac) and says to go to software update. There is no update being shown.

    I am trying to open a recent document in Pages. It says I need a newer version of pages to open document. When I go to install pages it says I already have on this computer and to check software updates. There are no updates showing. Now what?? I can't open any of my documents.

    you need a newer version of pages to open this document

  • Hi, I am trying to convert my resume on pages to a word document.  When i export the file to to make it a word document ie(resume.doc) it messes up my whole resume on websites and pulls up a bunch of random words. Please help!

    Hi, I am trying to convert my resume on pages to a word document.  When i export the file to to make it a word document ie(resume.doc) it messes up my whole resume on websites and pulls up a bunch of random words. Please help!

    What exactly is the problem?
    Your description is so muddled I am having trouble working it out.
    How does your exported .doc file mess up websites? In fact what does it have to do with websites?
    Where, how and what are the random words turning up?
    Peter

  • When working on document in numbers and saving it I then try to open on iPad. It is not syncing what do I have to do after using on Mac to then be able to upload on iPad.  I have set cloud up and it works with keynote

    When working on document in numbers and saving it I then try to open on iPad. It is not syncing what do I have to do after using on Mac to then be able to upload on iPad.  I have set cloud up and it works with keynote

    Welcome to the Apple Community.
    I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
    The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
    My syncs are immediate, I never get chance to see if it works in the background, sorry.

  • Tried opening a file in library and it states can't open database with library name? It says Relaunch then will not open? and Blocks me completely from Aperture. I have to go to Finder to Rename it? I need this file how do I get it to open?

    Tried opening a file in library and it states can't open database with library name? It says Relaunch then will not open? and Blocks me completely from Aperture. I have to go to Finder to Rename it? I need this file how do I get it to open?

    Aftershotz,
    You're going to have to give a bit more information.
    What do you mean by "opening a file in library?"  There is no function of Aperture to open files -- you can open (switch) libraries.
    You'll have to be more specific about error messages, too.  Perhaps some screenshots would be useful to diagnose your problem.  "Can't open database with library name" is not enough detail about what Aperture is really telling you.
    nathan

Maybe you are looking for

  • Missing lines when printing

    I installed my printer today then wrote a small letter. When I tried to print it out several lines were missing. I'm using the Libra office program which I've used before.   Bellow is the message I wrote. When I print it where it says till May 17th t

  • Images in web forms R6.0

    Leaving the client/server configuration and entering the true three-tier solution should be easy, says oracle. Then tell me how to "Create a container class extending then VBean" to invoke forms 6 to show a blob-stored jpg-file. Has anyone done it al

  • Packet sniffer only picks up UDP and no RTP packets when using JMF???

    Hi, I am developing a voice mail application to interface with asterisk. Here is the problem. I am using ethereal packet sniffer to sniff the packets. When I connect two regular SIP phones and sniff , I can sniff the RTP packets. But when I use JMF A

  • Flexfield indexing, is that smart?

    We are using many customizations with flexfields. Unfortunately, many queries are based on those fields and according no index is present, full table scans are happening all the time (many of the tables has 2-8 mil. of records). Because these tables

  • Umair: I want to know about the new Apple Trade in program?If any apple employee on the forum,get in contact with me.

    Umair: I want to know about the new Apple Trade in program?If any apple employee on the forum,get in contact with me.