TS3999 Can iCal participants "see" who I'm sharing the calendar with?
I want to share a calendar with two people but don't want them to "see" each other. One will be read-only, if that matters.
Is that information visible to all participants?
Can't I just set up Exchange as one of my calendars in ical?
Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
What is the best work around for this?
None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.
Similar Messages
-
Upgraded 1phone 4 can no longer see who is calling on other line?
Upgraded Iphone 4 now can no longer see who is calling while the phone is in use. I hear the beep but see nothing, also does not show in missed call.
If you are no longer getting a notification that there is a second call coming in, contact your carrier. It sounds as if there is an issue with call waiting.
-
Can't see who has replied to the thread in the forum, its pointess?
What's the point in creating a system where you can't see who has replied to the thread? Its absolutely F**CKING pointless? Does anyone at Adobe have any brains or are they all sitting with their heads up their backsides?
Surely before you release such garbage you test for these very simple issues, right?
osgood_(NOT M Golding) If anyone at Adobe is monitoring this please get my screen named changed to what it was previously as well.It needs a 'latest reply' on the posted list page like the old version otherwise you have no idea if anyone has replied to the post or not without opening it.
Latest reply: May 3, 2014 2:17 AM by . osgood_
The line below is not that necessary in the order of priority, which for all intense and purposes is quite useless. I don't really care about how long ago something was posted or where it was posted but an indication to show 'updated' posts and by who is vital.
9 minutes ago in Dreamweaver support forum
Why do we even need 'Dreamweaver support forum'. We already know that's where we are! I guess a selection of posts from other forums may appear in a 'general' postings list somewhere, but who really cares - if I'm asking a question related to DW that's the forum I'm going to, not a general list as I don't care a monkey knackers what's been posted in Fireworks or InDesign or Illustrator. If I did I'd go to those forums.
If you are tracking several postings it is going to become hugely annoying for both the person who has asked the question and the people helping the original poster as many replies will potentially go unnoticed and not resolved.
And what's with the silly horizontal scroll bar being created for long lines of text? That's annoying too.
Plenty of teething issue you need to get your head around over the next few weeks. -
I have 3 iTunes libraries on my one one computer and since I updated to the new version I can no longer see who's library I am in. It used to show at the top of iTunes the name of the library I was in. Is there a way I can tell which library I am in without closing and reopening?
No. Frequently the apps take up more storage space on the iPod that the file download size.
-
2.1 - can no longer see who has texted
Its really annoying that on 2.1 you can no longer see who has texted unless you open the SMS screen. Another backward step, along with the dreadful battery life, rubbish camera etc etc
Lauren L. wrote:
If you are using a passcode for your phone, it will only show a new text. That was a change that came with the 2.1 software. If you aren't using a password, then you should be able to see the complete message.
Indeed, and if my memory serves me right this feature was requested by many users. I agree, Apple has a lot of things to do (MMS, more configuration for message alerts etc) but I don't think they should be criticized when they finally do listen to users. (Such as the OP did.)
Cheers,
Addy -
Why did you changed the big screen picture it look so better that way PLSS !!! Put it back so small I can not even see who's calling me
Send feedback below:
http://www.apple.com/feedback/iphone.html -
Receiving Group Text : How do i see who else is in the distribution list???
Receiving Group Text : How do i see who else is in the distribution list???
other phones seem to have this, how can i see this?
Post relates to: Pre p100eww (Sprint)Use his/her Apple ID for iMessage on your phone...you'll actually receive the messages in real time.
-
I want to delete my old iPhone backup since I can not back up my new phone. Will I lose any pictures? Can you ever see what is actually on the cloud? Last, how do I delete the old iPhone back up. Thanks, been trying to do this for a long time.
Deleting the backup only permanently deletes the backup from iCloud. It doesn't do anything to the data currently in your account or on your devices. To delete it, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of the device that you want to delete the backup for, then tap Delete Backup.
You can't see anything in an iCloud backup, if that's want you're asking. You can only restore it to your device. You can, of course, see your other iCloud data. -
After the latest itunes update I can no longer see my iPhone listed on the left column. How can I get to the section where I can pick & choose apps etc to be synced?
Also I had to get a new iPhone & so I backed up the night before to the cloud & my computer. When I tried to restore from back up with the new phone my back up wasn't there - shouldn't it be automatic via wifi from the cloud?
What am I doing wrong?Your iphone is shown at the top of the page.
You can also simply click View>Show Sidebar and it will look about the same as it did before. -
Why can't I see my Apple TV in the Airport Utility?
Why can't I see my Apple TVs in the Airport Utility?
An AirPort Utility is not intended to configure an Apple TV, so there's no reason for it to discover one.
Use the Apple TV remote to configure it. -
I followed all of the directions after seeing that my laptop flashed the folder with the question mark. But when I went to disk utility to repair/ verify issues w/ start up disk it would not allow me to. The buttons to repair and modify we're there but they were grey and couldn't be pressed.
Were you trying to repair the disk you were booted from? You can't do that - you need to boot from your install disk, and choose 'Disk Utility' from the 'install' menu.
-
Why did Mozilla (v.4) erase all my bookmarks which existed yesterday? Can these kinds of disasters happen again in the future with Firefox? Mozilla developers: we are living in 2011...
Firefox makes bookmark backups daily in the following location: C:\Documents and Settings\{Username}\Application Data\Mozilla\Firefox\Profiles\123xxx.default\bookmarkbackups (where "123xxx.default represents a randomly named folder).
To restore from one of them, hit CTRL+SHIFT+B to open the Bookmarks manager and then click "Import and Export" | Restore and choose a date. See screenshot.
Before you do that though, could you please hit CTRL+I
Can you see any Bookmarks in there? -
I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive. I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?
Since it will not boot then a hardware test can't be run. You could try FireWire Target Disk Mode and if it works then access from another Mac to run tests on the new drive. You could also try installing the OS X software from the host computer. If this does not work then professional help should be considered.
http://support.apple.com/kb/ht1661
http://osxdaily.com/2010/04/07/how-to-boot-a-mac-in-target-disk-mode/
http://www.macobserver.com/tmo/answers/how-to-use-target-disk-mode-to-boot-from- another-macs-hard-drive -
See my Why my calendar display different there is one day difference from different when I see main screen and open the calendar
I too am having the same issue only I am in Regina, Canada. iCloud appears to think Regina, Canada is in the Central time zone which it is, but it does not use Daylight Savings time. My PC is Windows 7 and I am using Outlook 2010. I have iCloud on iPhone 5 and iPad 2. Terribly frustrating!
-
My boss started having this problem this morning. It may possibly be due to an update. The calendars appear to still be working fine (not 100% sure they're
getting new updates) and I've tried deleting them and re-adding them and the problem persists. Outlook will pop up the Security prompt asking for login credentials, with the username of the person whose calendar is shared pre-filled in the user name section.
If you click cancel everything continues to work but it prompts you again in a few minutes.
These calendars have previously worked perfectly with no issues.Hi,
Please confirm if there is any changes in Shared calendar account and your boss mailbox.
Since the issue occurs after the update in your Boss's computer, please reboot the local machine. And recreate the Outlook profile to have a try. About opening shared calendar in new profile, please open the shared calendar by the following steps:
1. Switch to Calendar pane.
2. Click Open Calendar > Open Shared Calendar.
3. Click Name to select the user who shared the calendar to this user.
4. Then click OK to open the Calendar.
Check whether there is any error when open it. If there is any permission error, please check the folder permission in shared user side.
Regards,
Winnie Liang
TechNet Community Support
Maybe you are looking for
-
Iphone Notes - how do I change the default mail address?
This a variation of the question of why my notes FROM the Iphone do not sync into Outlook Notes, anymore. In my Iphone Notes set up, it refers to my gmail address as the default address. In my Mail, I have two Outlook addresses, with one being the d
-
TS1538 Connection between iPhone and iTunes
My computer recognizes the connection between the USB and my iPhone 4 but iTunes doesn't find it. I've ran diagnostics and it comes up red which means iTunes can't locate it, but in My Documents my phone shows up. So what is going on?
-
Anyone know what this "Console" reading is indicting?
I have been having issues with my external drives mounting. They mount, unmount, mount, unmount, etc. I opened Console just for the heck of it (I have no idea what it is btw) and it just keeps running this notice over and over. I thought maybe it had
-
10.2 ok but cannot install 10.3 computer freezes
hello! can anyone help me? i cant seem to find the answer i am looking for. i have a Lombard (333mhz) g3 powerbook. i have maxed out the RAM, and removed the 4gig hard drive and replaced with a 60 gig Hitachi. (after a lot of reading and checking tha
-
Binary file open .. problem with formatting
dear all, probably it is too much time I am not using any more Labview, but I have a problem in opening the attached data file. it is supposed to be a matrix of 1000x316, with integer values up to 16 bit (65k levels). In matlab i open it with fopen