TS4000 I have been away for 2 weeks and a message appears on my iPad which is preventing me open my iPad. "iCloud backup. This iPad has not been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked and connected to Wi-Fi" Help?
I have been away for 2 weeks and a message appears on my iPad which is preventing me open my iPad. "iCloud backup. This iPad has not been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked and connected to Wi-Fi" Help?
What do I do to get rid of this message as it is preventing me accessing the iPad or closing it down?
Thanks
AndyNess59
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use your device again. Finally, open Settings > iCloud > Storage & Backup, and make a backup. The device will be backed up when it's plugged to the charger and connected to your network
Similar Messages
-
Hello:
I keep getting this message upon startup. Can't figure out how to address it. Here it is.
"/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not have the proper security settings.
Any suggestions?There's an invisible one name "Icon" according to the error message.
Enable Finder to Show Invisible Files and Folders
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder
To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder
Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
First, make invisible files visible. Find the invisible file in that folder and remove it. Please be sure you are looking in the /Library/StartupItems/ folder. There is another one in the /Home/Library/ folder. Be sure you look in the right one. -
SCCM Client Policy instance "The body for this policy has not been downloaded."?
Hi,
With PolicySpy I got SCCM Client Policy instance with an red and white symbol "The body for this policy has not been downloaded." what does that mean?
/SaiTechHi,
Is there something not working? What is the core issue?
-It is a long story, I will take the short version. I have had several supportcase at Microsoft, I think in two yeas time. We have done RAP as a Service, and no big issue. I have reinstalled the MP just some Days ago.
I started with slow App-V 4 user centric deployment (hours). No I have an case at Microsoft support about Enable Win32_QuickFixEngineering class in the Client Setting hardware Inventory dont get enable at client side.
If I do policy reset I think it take long time 15-30 minuters to all actions show up again.
So I try to understand MP and policy, I have an feeling that something is not right but what?
/SaiTech -
When I open iTunes I get message 'This version has not been correctly localised for this language. Please run the English version' - any ideas?
Hi there nisbetk,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
-Griff W. -
I purchased Adobe Creative Ste 5.5 Master Collection for windows for my college student daughter in '12 and she would like to install in on her iMac. Please advise on the process. Software has not been used yet.
you need to exchange your win cs5.5 for mac cs5.5.
unfortunately, adobe only offers that for cs6, Order product | Platform, language swap -
I recently got the new iPhone 5c I used icloud to back everything up from my 4s to my new 5c. Now, I keep getting a pop up that says Continue Restoring? (This iPhone has not been backed uprecently because it has not finished being restored. Would you like to finish downloading any remaining purchases and media before backing up, or delete them along with any app date?)
I seleted to finish downloading because I didn't want to lose anything. It still will not finish downloading and I have tried this several times.
What do I need to do to that I can get my iphone to back up and so that I can install the new iOS?Hello there, Brandifoote24.
The following Knowledge Base article offers up an explanation of what you're error signifies:
iCloud: Understanding Backup alert messages
http://support.apple.com/kb/TS4576
"This iPhone has not been backed up recently because it has not finished being restored. Would you like to finish downloading any remaining purchases and media before backing up, or delete them along with any app data?"
This message is displayed if your iOS device has been trying to complete a restore for more than three days. This can occur if your restore has been interrupted due to network connectivity issues or some other problem occurs.
Being that this is the case, you would want to go back to the article it seems you were referred to us from and try to restore from your icloud backup again:
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/TS4036
How do I restore an iCloud backup if my device is already set up for use?
You'll need to erase all data and settings from your device, so first confirm that you have an iCloud backup to restore:
Go to Settings > iCloud > Storage & Backup > Manage Storage, then tap the name of your device to view a list of iCloud backups.
Check the date of the backup you want to restore, because you'll be restoring only what iCloud backed up on that date.
After confirming that an iCloud backup is available, follow these steps:
Connect your device to a power source and make sure that it is connected to the Internet via Wi-Fi.
Follow the instructions for restoring your iOS device from an iCloud backup, which include making sure that your device is using the latest version of iOS.
If the issue persists, then I would troubleshoot Wi-Fi using the following article:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Error Message "This Item has not been purchased"
I just bought a brand new computer with Windows 7 and I just downloaded Itunes. I couldn't remember my itunes password so I changed my password. After changing my password, I changed my Email address since I was using an old one I don't have access to anymore. After doing that I started trying to get my old purchases put on my new computer and maybe 40 songs downloaded before I got an error saying "This item has not been purchased with your Apple ID". These songs are listed in my purchased list, I bought them on my old computer and Itunes isn't letting me download nearly 300 songs that I paid for.
How do I fix this?Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
ISE 1.2 Guest Portal - This device has not been registered.
I have setup and SSID on my WLC. I got the redirecting to my ISE guestportal working.
However when I sign in I get a Device regitration Page
"This device has not been registered"
Unable to obtain the user information needed for network access.
The device ID is grayed out and blank.
Any assistance in this matter would be greatly appreciatedThanks Johnston,
P.S for those who needs the path ISE 1.2 Administration -> Web Portal Management -> Settings -> Multi-Portal Configurations -> DefaultGuestPortal -> Operations.
On another note
When I login - I get my acceptable usage policy.
Accept
Then get a Device registration Portal where I can add the MAC address.
Now I have two quistions.
When I add my test mac address the url redirects to myservername:8443/guestportal/AfterDevReg.action - unable to connect <- that's the one issue.
The other is - Can't I by pass the MAC? ie once the user is signed on to get access.
Curretly I have the following settings enabled.
Enable Mobile Portal
Allow guest users to change password
Guest users should be allowed to do device registration <- if I disable that after signon the page just flash back to the guest portal. -
Central Web Authentication Fail - This device has not been registered.
Dear All,
I have problem when apply the cwa. i have wlc and ise,
I want all user (all type device) that want access to my network by Wifi, will authenticated by AD.
but user cant connect to network evenly only authenticate.
My ISE Authorization rule:
if
(Wireless_MAB AND AD1:ExternalGroups EQUALS example.com/Users/Domain Users)
Anyone, have experience like this before, please share..
nb : my ise licese is Base Package
Thanks!!I had follow the configuration guide from here:
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bead09.shtml
but, my authentication always fail with redirect to device registration,
when user connect the ssid and input the username and password based on active directory,
then browser will show up like this :
1. Access with Windows :
Device Registration
This device has not been registered.
You need to manually configure your device. Contact your system administrator for assistance.
Your device configuration is not supported by the setup wizard.
Device ID : my-workstation-mac-address-
Description :
2. Access with Android
Device Registration
This device has not been registered.
You need to manually configure your device. Contact your system administrator for assistance.
Unsopported operating system type encountered.
Device ID : my-android-mac-address-
Description :
Thanks, -
ODBC: This Datasource has not been Registered, Please register first!
Hi,
I just installed Oracle BI 10.1.3.4, and am going to demo the new interactive dashboard to my seniors. First I need to have a database to connect to, so I go to the ODBC client to define a data source. Now I'm stuck here: Under File -> Open DataBase and get the following values to fill out:
DSN:
User:
Password:
Database:
I'm trying to connect to an Oracle database, so under DSN I choose 'ODBC data sources', but get this message everytime: ODBC: This Datasource has not been Registered, Please register first!
It doesn't matter whether I fill out the other fields or not. What's the issue?
All help apprecitated.
Thanks!First and foremost: "BI 10.2.x"? BI EE hasn't reached beyond 10.1.3.4.0 yet.
Secondly: if you want to access an Oracle data source it's easiest to go over a TNSNAMES entry. Just install an Oracle client locally.
Alternatively, if you want to create an ODBC connection...that's got nothing to do with OBI, that's an OS topic. Assuming you're on a Windows box, it's the "odbccp32.cpl" which normally resides in C:\Windows\system32 that you're looking for (as you say you can't find it in your start menu).
Easy way: windows key + "R" (or Start --> Run...) --> odbccp32.cpl
Hth,
C. -
Hi, why can't I use my apple ID even downloading free apps there's a prompt message saying " this ID has not been use to iTunes" what should i do?
That usually means that your payment information is incomplete. Even if you want to download free apps, unless you were able to select "None" as your payment option when you created the ID, you still have to enter a credit card.
There is a very specific way that you have to create an Apple ID if you don't want to use a credit card and I am guessing that is what you wanted to do originally, but you didn't do it correctly. The instructions are in this kb article.
http://support.apple.com/kb/HT2534 -
JCOP Tools "This package has not been built"
Hello,
I'm using the Eclipse with JCOP Tools 3.1.1 and sometimes the .cap file is not built and the upload of the Applet fails when running the project
cm> upload ".../workspace.1j.../myapp.cap"
jcshell: Cannot read </../../myapp.cap>: java.util.zip.ZipException: error in opening zip fileThe "CAP File Properties" view in Eclipse says "This package has not been built" but I don't know how to force the build of the package. I tried to clean, manually/automatically build the project but it just won't get build :(
Any ideas ?
Thanks.
Texwell nevermind, when this happens I just build the .cap alone:
cd myproject/bin
..../java_card_kit-2_2_1/bin/converter -out CAP -applet 0x01:0x02:0x03:0x04:0x05:0x2E:0x61:0x70:0x70 com.test.MyApplet com.test 0x01:0x02:0x03:0x04:0x05 1.0 Tex -
Bridge won't allow me to open Camera Raw because a qualifying product has not been launched, any suggestions?
Actually, it may be more to it. I just wasted good 7 hours on the issue: I transferred a big external drive from old WinXp system to my new W7 system, and faced the ownership mayhem ever since.
No matter what I did to the Volume Owner, Files Owner and attributes, recursive Directory Ownership jobs enduring tens of minutes at a time, nothing helped really.
Because you might have one more issue:
Use "Folder Options", either from Tools menu in Explorer, if menu shows, or via Control Panel.
Click on View tab, and find the box for "Hide protected operating system files (recommended)". Ignore that recommendation, uncheck.
Go now to the root directory of your troubled drive and you will see a hidden file "System Volume Information". This can be the "bad guy." Ensure that you have access to that file using the Properties / Security tab in a customary fashion! In my case that file was "padlocked", a small lock icon was placed over the folder icon to indicate that.
Only once I changed that, I was able to access the LR catalogs as a regular user. And only than LR was finally able to access existing previews and to display the grid image icons!
Ugrh.... Windows, the "personal computer system" is a mess, a labyrinth of convoluted intertwined dependencies, maybe created in competing departments and piled up atop of each other in an unseemly fashion. Compared to Unix and its derivatives it is a nightmare, which is a part of our lives for decades already.
I think that all the Apple users are now double-happy to have made the transition, when they see such "problems." -
since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status, help please
since iCloud downloaded, mac pro has not been able to sync, unable to save info, bookmarks, lost all contact info, gives wrong info on laptop status, help please
-
When I try to open itunes i get a small box that says....This version of itunes has not been correctly localized for this language. Please run English version. Help please!
June 2014, iTunes not localized - https://discussions.apple.com/thread/6306009 - language settings
Maybe you are looking for
-
How to stop subscription emails after Unsubscribe
Hi. This is APEX 4.2.2.00.11. We exported an application from instance A that included four saved subscriptions, then imported it to a test environment B. We received the emailed IR subscriptions from instance B, as expected. Then clicked the Unsubs
-
What's the fastest way to create a clipping path?
In CS3 & 4 I've created a bazillion clipping paths via pen tool and mouse. I've also tried using the various selection tools to create selections, then turning those selections into paths and modifying the path. I've roughed in paths then zoomed way
-
HT1386 My phone can not activete to the server after updating it with ios 6.1.3 update
Am using an apple 3g after updating it with ios 6.1.3 update it is failling to activete th the server.What should i do to have it work?
-
hi! i have ds problem.. how do u create a JFileChooser dialog that would only be modal to its parent window and not to the entire application window... pls. help.. =)
-
hi i create a video file and try to insert an audio in certain time. i use a processor for this, so far i only sucseed to insert it in time 0. i tried to use syncStart() method and wrote inner class for it : class MySync implements ControllerListener