TS4000 What is the "correct" date and time settings for icloud reminders?

What is the "correct" date and time settings for icloud reminders?

Sep. 18th. We don't know what time.

Similar Messages

What are the correct setup and system settings for importing HDV video from tape?

I keep trying different "easy setups" and system settings/preferences in order to import both the audio and video from HDV recordings on miniDV tape to no avail in either FCE4 or FCP5. I import via firewire from the camera. My computer "sees" the camera and controls playback (I can hear the audio) but no video displays for capture (just color bars).
My camera is a Canon Vixia HV40 and my computer is a MacBook Pro running Snow Leopard 10.6.8.
I've tried the HDV easy setup...no video...
I've tried HDV 1080i/60 as I saw recommended somewhere else...no video...
Captures standard video just fine but I'd like to try editing some higher def footage.
Any suggestions?
Many thanks.

The combination of all these helpful ideas solved the problem.
I set AV settings to HD and Apple Intermediate Codec HDV 1080i/60 AND set the cameras output to "locked" HDV. Funny, it had been on "A" (Auto) before and should have simply sensed the need for HD output. I then tried to capture using "A" again and this time it detected the difference between SD footage and HDV footage (I had clips of both kinds on the same tape).
I ran similar capture tests on FCP 5.1, FCE 4, and FCPX and all three programs captured HDV video and audio.
Thanks again everyone. Be sure the camera is set to output HDV or "A".

With Premiere elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Codec and Aspect settings for a crisp video and a small file size?

With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?

Gary Krouse
We will customize a very detailed reply, but
(a) What are the properties of your source media?
(b) What did you or the program set as the project preset to match the properties of the source media?
(c) What specific requirements do you have for this H.264.mov export file?
File size can be a compromise between bitrate, file size, and quality.
Thanks.
ATR

Need help restoring the CORRECT dates and times to iphoto '09 photos

I have read a lot of stuff on here about restoring dates and times in iphoto only to no avail. All I want to know is: 1 - how did all the dates of my photos get changed in the first place? ; 2 - how can I restore them to their original dates?

Well, I noticed my dates were incorrect weeks ago. The only thing I did was upgrade from '08 to '09. I tried using "adjust date & time" but I would have to know all the dates by memory in order for that to work. My dates are all recent dates. Sorry for the ambiguity.
Forget what I said about the event labels. They are titles I made for each event; however, all of the dates are incorrect. Maybe my camera is to blame!
Message was edited by: Sold on Mac

I get this error message, (Error code: sec_error_ocsp_future_response), but my computer has the correct date and time.

After getting this error message, I checked the date and time on my computer. That is not the problem.

You can also check the connection settings.
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

New FCP user trying to learn the correct project and export settings for HD

Hi, I am a novice and have used FCP on my laptop for university projects only, and now have been asked to cut a trailer for a 7 min HD Pilot.
A. I had to work in a different part of the country for the last 2 weeks therefore making this more problematic for myself long term hence:
B. I have only been given a QT file of the pilot, as to cut a rough idea of the trailer, which I will then have to redo with the original HD files, when I return to them tomorrow.
C. I created a low res QT to work with in FCP and have probably set up my project in a odd/wrong way and need to export this DV low res version for viewing by tomorrow, and I would ideally like it to look like the right aspect ratio and what not.
I know very little about ratios and interlaced and progressive files, and this project has been shot manly on a digital SLR camera for the animation, it has After Effects files and with sections of live action which I think was shot in HD 'i' mode.
I would like to learn quickly the sort of setup I should have for this kind of project, how I should export this low res DV version for viewing and for exporting the final HD project with what settings I should use.
I am sure I should have detailed more information, but as it is im not sure what is relevant. I can find out if im pointed in the right direction.
Hope someone can help
Cheers
Kat

B. I have only been given a QT file of the pilot, as to cut a rough idea of the trailer, which I will then have to redo with the original HD files, when I return to them tomorrow.
Well, this will make cutting more difficult. Because a low res version of the trailer will not have any timecode...nothing that references the main movie. So you will do the cut with the QT movie and then have to go back and eyematch-cut the trailer with the high res footage. Not fun and very time consuming. Not to mention that you will be cutting with the mixed audio of the trailer, including music and that will not sound right when you cut the trailer with the new music.
You need a QT version of the movie that contains the timecode of the original master (using media Manager to recompress to DV or other offline codec will do this), and you REALLY need to get split track audio. If they are record producers, they'll know what that is.
Shane

What are the correct Premiere Pro CS4 settings for producing WMV/MP4 to FLV/F4V videos?

Greetings.
I have recently purchased CS4 Production Suite. My task is to convert WMV/MP4 videos to FLV/F4V videos that contain titles, transitions, and credits for streaming from Flash Media Server.
My test videos are experiencing audio sync issues when using Adobe Media Encoder as the export tool. When I use Flash Video Export tool using the source WMV/MP4, I do not experience sync issues.
I can control the WMV/MP4 output settings since we record our own sessions using Windows Media Encoder. I can also utilize Flash Media Live Encoder to capture the source.
The video source comes from a video capture card (Osprey) that is connected to an IP based camera(s) which are controlled by video technicians.
We record from that capture card into WMV format.
My question is, what are the settings in Premiere to produce FLV/F4V for streaming in 480p quality?
I am new to video production and gladly appreciate any assistance.
Regards,
Shack

Classification: UNCLASSIFIED
Caveats: NONE
Jim,
Thank you for your response. I am a total noob at video, but have the requirement to produce recorded video to our FMS servers.
Here is my situation. We have classrooms and auditoriums hard wired with IP cameras. Our video techs can record to DVR and then finalize to DVD (VOB). We also have a control center that can capture those cameras using Windows Media Encoder to record.
I have been given CS4 to produce these videos. Each time that I transcode, the audio gets out of sync. I am trying to figure out a suitable way to take VOB and WMV files into PP and output to FLV/MP4.
Appreciate any advice...
Shack

How do you fix the date (day number only) in menu bar to match correct Date and Time Preferences?

My date and time preferences all show up as correct and I get "Sun 10:54 AM" in the menu bar (correct), but when I click that to quickly get the day's date, I get "Sunday, August 5, 2011". The '5' is the only thing that is wrong, and it has remained '5' for the last 3 days, even thought the Date & Time Preferences are correct. Is there any easy fix for this? I don't know if August will change to September, but the day of the week has kept up with time!

I know how to get the full date and time, etc. to show up on the menu bar (and it shows up correctly), so it's just a little 'glitchy' thing that when you click on the date/time in the menu bar, the greyed date remains on the '5th' of August - sort of like that Groundhog Day movie!

Finding the initial date and time of a modified instance of reccurnt evnt

The problem situation is as given below:
I have created an event recurrent using the outlook client. I them modified one
of the instance in it to occur in a data and time different from the existing
date and time.
Using the CAPI i wish to retrieve the initial date and time when the instance
occured. According to documentation i should have the initial date and time in
the Recurrence ID parameter. When i look at the icalendar i see that the
recurrenceid matches the start date of the current instance and not the initial
date and time. I am using the fetchEventByUID in the CAPI API set.
Is this behaviour of changing date and time of the recurrence-id the expected
one or is there any problem in the configuration on my machine.
Counting on some insight into the parameter where the initial date and time of the event are stored.
Best Regards
Joyce

Hi Joyce,
The sdk always sets the recurrence-id to be the starttime of the instance.
So the behavior you encountered is what one should expect with the sdk.
There were some changes in a 10G to correct this situation for a given service. (i.e. have the initial date and time in the Recurrence ID parameter, for instances of the recurring set).
This fix would not be available for the public sdk version, but given that this feature is important for your application, you could log a tar and it might become available in some 10G patch.
Regards,
Jean-Philippe Guguy

The setting date and time is not working

Bought an apple TV, installed it as per instruction, connected to my internet but the seting date and time is not occuring and the activation cannot occur either. Spent 1 hr on the phone with Apple support staff - they told me it may be a router blockage and to contact my internet provider. contacted internet provider , they tell me everything is working from their end so must be the apple TV device. I was told this was easy techonology and that I would not have issues - I have spent 3 hrs on this and truly frustrated as its not working . any suggestions would help!

That would be a network issue as you were initially advised. When the date and time can not be set it means it is having trouble connecting to the network.
Make sure router is up to date, reboot router and ATV. Make sure location is set correctly via ATV and also DNS (settings - general - network - configure DNS - automatic)
Make sure your router allows access over port 123.
Failing that try a restore on the unit

I Need to Write the current Date and Time

I need to write the current date and time to calculate the spend time in each instruction.
What is the instrucion?
Thanks.
MIGUEL ANGEL CARO
[email protected]

The current time can be determined with a Date object:
Date now = new java.util.Date() ;or if you are interested in the seconds since the epoch:
System.currentTimeMillis() ;If you wanted to print them out:
System.out.println( new java.util.Date() ) ;
System.out.println( System.currentTimeMillis() ) ;Kenny

Wrote the current Date and Time in the backend

HI everyone,
I created a table view, where I display several records. Right now I will add an record to this table, which should be written back in the backend and automaticaly add the current date and time.
But I don´t know to make this. I tried several time with the funktion "now()", but it doesn´t work. So any help for me, to explain how I can display the actual time and then write it back to the backend?
Thanks

we use a crm system. but the BAPI I mentioned was
just to play with. My basis will develop a new API
for the project, that have the requested Inputfields.
But what I tottaly forget was, that there has to be a
field for the time, so thanks for the advice.
No Problem.
I´m still of the opinion , that it should be possible
to add the curret time in a field with the
funcionality of the VC, even there is a way to show a
clock with the current time. My problem is that I
can´t figuer out how to do this.
Therefore you can use the TNow() function (Time functions) and the Now() Function (Date functions). You can cast them to a string and concatenate the string, then you have the date of today with the current time. This string you can format and transfer it as input for your BAPI_ADD_BP for example.
Hope that helps.
Best Regards,
Marcel

I'm trying to display the current date and time on my iPad.

First, I'm not sure this is a valid post to this forum. If not, I'd appreciate knowg in where I can get help.
I have tried several ways to display the current date and time on my iPad. None work. Most things I try give me complier errors but the latest code compiles but won't display the correct time.
Here's the dispatch code in my ViewController.m file:
dispatch_queue_t queue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_HIGH, 0ul);
    dispatch_async(queue, ^{
        [NSTimer scheduledTimerWithTimeInterval:NSTimeInterval)1.0f target:self selector:@selector(updateLabel:) userInfo:nil repeats:YES];
Here's the updateLabel code: (which never gets executed).
- (void)updateLabel:(id) sender {
    dispatch_sync(dispatch_get_main_queue(), ^{
    NSLog(@"Datefield Update Called");
    NSDateFormatter *dateFormatter = [[NSDateFormatter alloc] init];
    [dateFormatter setDateFormat:@"EEEE, MMMM dd, yyyy 'at' HH:mm ZZZZ"];
    NSDate *dayTime = [NSDate date];
    NSString *formattedDateString = [dateFormatter stringFromDate:dayTime];
        _dateField.text = formattedDateString;
    [self.view addSubview:_dateField];
    NSLog(@"Datefield %@",_dateField.text);

Your code is needlessly complicated and has a few problems:
// These objects should be created only once.
NSTimer *dateAndTimeTimer; (You might need to make this a property with a strong reference).
NSDateFormatter *dateFormatter = [[NSDateFormatter alloc]init];
[dateFormatter setDateFormat:@"EEEE, MMMMM dd, yyyy 'at' HH:mm ZZZZ"];
// The subview should only be added once.
[self.view addSubview:_dateField];
[self performSelectorOnMainThread:@selector(startDateAndTimeTimer)
                        withObject:nil
                     waitUntilDone:YES];
-(void)startDateAndTimeTimer
    NSTimer *timer = [NSTimer scheduledTimerWithTimeInterval:1
                                                      target:self
                                                    selector:@selector(updateLabel)
                                                    userInfo:nil
                                                     repeats:YES];
    dateAndTimeTimer = timer;
    [[NSRunLoop mainRunLoop] addTimer:dateAndTimeTimer forMode:NSRunLoopCommonModes];
-(void)updateLabel
     NSDate *dateTime = [NSDate date];
     NSString *formattedDataString = [dateFormatter stringFromDate:dateTime];
     _dateField.text = formattedDateString;
     NSLog(@"_dateField.text=%@", _dateField.text);

HT204266 cannot connect to the store...a secure connection could not be established. please check your date and time settings... I check the date and time, and the store still gives me the same error

I am having trouble connect to the app store, the error I am given is - Cannot conntect to the Store. A secure connection could not be established. Please check your Date & Time settings. - I checked my date and time settings and also shut down my Ipod touch.

See:
Can't connect to the iTunes Store
Also, besides the time and date being correct make sure the time zone is also correct. Also, if yo have iOS 5, make sure date&Time is set to Automatic.

Get the Current Date and Time of a Location

I have created a windowsPhoneApplication in silverLight 8.1.In my application,I have to upload videos on some server.The Uploading get failed If the Date and Time settings of my device is not the current Date and Time.So How can I get the current date
and time even if the device settings is wrong?

Hi shifana,
Do you know server's time zone? If yes, you can manually translate to the correct time zone.
Otherwise try some online time acquire API.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

TS4000 What is the "correct" date and time settings for icloud reminders?

Similar Messages

Maybe you are looking for