TS4002 Icloud Mail doet not work properly with PC since a few days!!!

Icloud Mail doet not work properly with PC since a few days!!!

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

Similar Messages

  • Mail does not work properly with gmail

    Hi everyone. I am a very recent switcher and the switching process was great and extremely easy, but there has only been one problem that I can't seem to solve. Getting Gmail to work with Apple Mail. I followed all the steps on gmail's website on, how to set up gmail for POP, and how to configure Apple Mail to work with gmail, but I still can't get it to download all my emails. It only downloads some old emails, marks them all as unread, and then doesn't act like I have any other emails(which I do). Under system preferences, I have the account type labeled as POP, the incoming mail server set to pop.gmail.com, my username and password set, and the smtp box set to smtp.gmail.com. Under server settings I have the server port at 587, the ssl box checked and the outgoing mail server as stmp.gmail, like I said before. Under the advanced tab of the accounts section of apple mail preferences, I have the account enable box checked, the include when automatically checking for new mail box checked, and down at the bottom, I have the port set at 995 with the ssl box checked. In gmail, under my forwarding and POP settings, I have it set, under the POP download section to: Enable POP for all mail(even mail that's already been downloaded). Also, the status is set to "POP is enabled for all mail that has arrived since 10/13/05(which was when i first got my gmail account). Like I said before, Apple Mail at first starting downloading all the mail in my gmail account and then stopped after about 1000 to 2000 messages which only got it to about mid-2006 or earlier. Yes, I've run software update recently, too. Does anyone know why it would not dowload the rest of my mail? All help is very greaty appreciated. Thanks.

    I just put my gmail account in Apple Mail and it works fine - even transferring my old gmail messages. Maybe your problem is STORAGE - see this from Mail Help:
    About .Mac Mail
    .Mac Mail works with existing email clients like Mac OS X Mail, Outlook Express, and Netscape Communicator.
    You can also check email when you're away from your own computer. All you need is a computer with an Internet connection and a supported web browser to check your .Mac Mail. To access .Mac Mail on the web using Mac OS X version 10.3 or later, use Safari 1.2 or later or Firefox 1.0.1 or later. If you're using Microsoft Windows XP, use Firefox 1.0.1 or later or Internet Explorer 6 or later.
    Use POP or IMAP protocol to suit your working style and set up automatic email forwarding or replies.
    Your email address is your .Mac member name followed by @mac.com, and the password for accessing email is the same as your member password.
    Note: AOL recently added support for IMAP, so you can now read your AOL mail using Mac OS X Mail. You cannot use AOL's email program to read .Mac Mail messages directly, but you can set up your .Mac Mail account to forward email to your AOL account.
    .Mac comes with 1 gigabyte (GB) of combined email and iDisk storage. .Mac trial members and email-only accounts get 50 megabytes (MB) of storage; Family Pack sub-accounts get 256 MB. You can designate storage space to your .Mac Mail account and your iDisk. For example, if you need more storage space for your email messages, you can set your .Mac Mail storage capacity to 800 MB and reserve 224 MB of storage for your iDisk. You can also increase your combined email and iDisk storage to a total of 2 GB or 4 GB by purchasing more storage. (If you have a trial account, email-only account, or Family Pack sub-account, you cannot increase your storage amount.)
    Your .Mac Mail storage is automatically set to 512 MB unless you change it. You can't assign less than 15 MB of storage to your .Mac Mail account.
    .Mac comes with 10 GB of data transfer per month and a 10 MB maximum message size. You can increase your monthly data transfer limit up to 250 GB per month by adding more storage space to your .Mac account. You can also purchase up to 10 additional email accounts. (Email-only accounts get 50 MB of storage space but no additional .Mac services, and Family Pack sub-accounts get 256 MB of storage space, but cannot purchase additional email accounts.)
    If I had 2000 emails on my computer I would shut it down and never turn it on again.

  • Icloud mail client not working properly

    mail client does not replicate mail from icloud quickly AND unable to send mail from local client - am I doing something wrong?

    Hmmm, iCloud eMail part should work fine on PPC in 10.5.8, even 10.4.11, & 10.3.9
    Is this how it's setup?
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
        •    Server name: imap.mail.me.com
        •    SSL Required: Yes
        •    Port: 993
        •    Username: [email protected] (use your @me.com address from your iCloud account)
        •    Password: Your iCloud password
    SMTP (outgoing mail server) information:
        •    Server name: smtp.mail.me.com
        •    SSL Required: Yes
        •    Port: 587
        •    SMTP Authentication Required: Yes
        •    Username: [email protected] (use your @me.com address from your iCloud account)
        •    Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • Mail is not working properly (cannot replay), and skype cannot be answered

    Did the verification, repair and installation disk of Mac. Why mail is not working properly (cannot replay), and skype cannot be answered?

    I most often do not restart my new MBPro .... 10.9.5 .....  but happened to a day or so ago, and it immediately began to block / problem with email .... I waited to see if it sorted out, but no .....
    I get he server “p06-imap.mail.me.com” cannot be contacted on port 993 .....     then deselected SSL and that did not help, so went back and selected it again .... and again not working .....
    I can see my stuff "online" but I do not want to do it that way EVER ..... 
    your "deselect mail" in ICloud preferences    ....   did nothing good for me .... any other thoughts Linc ??   in fact, some hundreds of in and sent emails did not show up .... I'm hoping they are going to when this gets fixed .... but hey, .....  right now I'm NOT in business ....
    thanks

  • Remote not working properly with Apple TV...sporadic fuctioning

    Hello,
    I have no idea what caused this to happen, but both my remotes (I have one from my MacBook Pro and one from my AppleTV) seem to not work properly with AppleTV. It sometimes works but it is extremely frustrating as it only registers about 1 out of every 10-20 clicks then continues to remember the previous clicks therefore making it essentially impossible to select the desired menu/item. Basically it just seems like it's out of control!
    I tested whether it was the remote or AppleTV that was causing the problem by running Front Row on my MacBook Pro and both remotes seem to navigate Front Row perfectly fine. They both act the same way with AppleTV, whether they are paired or not. It seems as though something happened with my AppleTV. This problem occurred randomly, with no specific cause I can think of.
    Please let me know if any of you have ever experienced this problem and what your solution was, if any!
    I have tried restoring to factory conditions, resetting settings, ran diagnostics, unplugged and replugged it, and nothing seems to be working!
    Oh, and I just replaced the battery on one and have tried swapping batteries, etc.
    HELP PLEASE!
    Thank you,
    Travis

    The menus have never been as responsive as they used to since the 2.0 update in my opinion - basically AppleTV seems to cache/buffer remote click if it is busy or perhaps waiting for something to stream from itunes, and when resources become available it suddenly executes all command rapidly which makes it behave wildly in menus.
    Usually happens I find after restarting the unit or if streaming drives have gone in to power saving modes and there's a delay while they wake up to feed the AppleTV.

  • HP computer will not work properly with an HP printer

    I have the following two items that I am trying to use together:
     - HP 23" TouchSmart Desktop, T6500 2.1GHz 4GB DDR3, 500GB HDD (Windows 7)
     - HP OfficeJet 6500 Multi-Function Printer/Scanner/Fax
    When I try to scan to Adobe Acrobat Professional 9.0, the document goes through the scanner, however the dialog box that I would expect (e.g. "Next Page" or "Done") never shows up.  At this point, the system is unresponsive with respect to Adobe or the printer.
    I suspect that it is waiting for the input from the dialog box that never showed up.  I tried to move the other windows to see if the dialog opened in the background, however I am not able to select any of them (they remain frozen).
    I contacted HP Support, only to have them tell me it must be the driver, and I have an "old" printer.  (I did not realize that a 9 month old printer was considered "old").  I have tried all of the possible drivers that are available (original disk, downloads, other downloads from HP tech support), none of these resolves the problem.
    In any case, they were unable to resolve the problem of having an HP computer work properly with an HP printer.  (The printing function seems to work, just very slowly).
    Has anyone else heard of this?  Is there a resolution?

    Update: I am still looking for a solution to this problem - the scanning portion of the Multi-function OfficeJet 6500 does not work properly with the HP TouchSmart computer.
    I have not been able to find anyone in HP that can tell me when (or if) new drivers will be released for this printer.
    I decided to investigate upgrading to a newer version of printer since HP told me the 9 month old printer I have was "obsolete", only to find that the identical printer is still on sale in many stores.  Hmmm....
    I feel like I am getting the run-around from HP.
    I have since tried several more driver/software combinations, but every time I have the same problem (as described in the previous post).
    If anyone has any ideas or suggestions, I would be most happy to hear them.
    Thank you.

  • Help, web cam is not working properly with win vista

    Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
    lenovo easy capture 2.5...so if u cud suggest me anything...
    Moderator note; subject edited

    re-install drivers and try again. ( also easy capture )

  • Hi, My iPhone 4s does not work properly with the sound.

    Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz

    Hi M3MB3R,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting tips in this article helpful:
    iPhone: Sound muffled or low from the speaker or when speaking into the mic
    http://support.apple.com/kb/TS1631
    Cheers,
    Jeremy

  • My iphone 5 does not work properly with Ford Sync,

    Hi, My iphone 5 does not work properly with Ford Sync, everytime I pair the phone, Ford sync navigation system freezes and does not work !
    Can someone help.

    Hi M3MB3R,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting tips in this article helpful:
    iPhone: Sound muffled or low from the speaker or when speaking into the mic
    http://support.apple.com/kb/TS1631
    Cheers,
    Jeremy

  • My garage band will not work properly with new lion upgrade..HELP

    My garage band will not work properly with new lion upgrade..HELP
    I have tried to open old session i have done in garage band and many of the effects and instruments I have used will not show up. The system seems to have a bug.

    If the graphical user interface looks broken, that is quite often a problem of corrupted user preferences - have you tried to remove the preferences file, as described in the FAQ
    http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html
    Here is again the short version:
    Quit GarageBand, if it is running.
    Open your User Library in the Finder. It is hidden in MacOS X Lion, so use the Finder's "Go" menu:
    Finder > GO    hold down the "Options" key, until the library appears in the menu, select it.
    In the window that opens, open the folder "Preferences" and remove the file:com.apple.garageband.plist and com.apple.garageband.plist.lockfile
    Then try again to run GarageBand and download the loops.
    The preferences file stores all you user settings that you set using the "Preferences" panel in GarageBand, also the layout of the GarageBand window and the location of your recent projects. You will have to enter these settings again after removing the file.
    Regards
    Léonie

  • Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

    Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

    Try a reset:
    - Hold the home button and sleep/wake button down at the same time. When the Apple logo appears release both buttons then try and charge again.
    If issue persists try:
    - Another known working cable
    - Check the charging port for any damage or debris
    - You could also use a dry soft bristle toothbrush and gently brush it on the port to clean it of any debris that could be in there

  • Just upgraded to iOS5 on iPad. Music app and mail does not work properly.

    Just upgraded iPad2 to iOS5. Music app does not work properly. When I select a song to play, it plays a different song. Sometimes, it just stops playing songs, other times, it shuffles songs.
    Not sure whats going on.
    Worked fine using iOS4.3.5.
    Synced the iPad to iCloud. enabled mail. It shows under settings that the iCloud mail is setup, but the mail does not appear in the mail app. Not sure whats happening with these functions on iOS5.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Icloud mail does not work over cellular network after upgrade to IOS 8.1.3

    Hi,
    Since I did the update to IOS 8.1.3 on my iPhone 6 Plus yesterday, my icloud mails cannot be received/sent with my phone over the cellular network.
    In order to make mails workin' I need to be connected to a Wifi network.
    All setting are correct on the phone.
    How can I fix this **** issue.
    Deleted the icloud account already and added it again but that does not help.
    Also when I try to connect  to iCloud from the iCloud settings it says: Authentication Failed - A server error occurred.
    The password is correct.
    Please help me.
    Jerry

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

  • Old Netscape console 4.2 not working properly with new Directory Server 5.2

    After successfully installing Messaging Server 5.2 and applying patch 2, the old Netscape Console doesn't work properly, I tried running the script which is given in the link
    http://docs.sun.com/source/816-6734-10/index.html
    which hobbles the server by creating a set of dummy jar files in order for the directory server console not making any changes on the messaging server. At first I got these messages:
    Failed to install a local copy of msgadmin52.jar or one of its supporting files: not a ZIP file (END header not found)
    I got the same message for these 2 files:
    admserv42.jar
    msgadmin52.jar
    After that I made real dummy jar files using a zero-length file I created with touch and I got these messages:
    class com.netscape.management.admser.AdminServer not found
    After that I erased all the files created by the script and I get these messages:
    failed to install a copy of admserv51.jar or one of its supporting files: null
    failed to install a copy of msgadmin.jar or one of its supporting files: msgadmin52.jar not found at http://192.168.10.205:5001/
    and for admserv42.jar I get the same message
    Does anyone have a clue on what to do next??
    thanks in advance
    Eduardo

    The thing is that the netscape console 4.5 won't work properly with messaging server 5.2, and the directory server console is not working properly for the directory server. I already know the limitations about these consoles since it is explained in the doc where the procedure of migrating from a 4.x directory server to 5.1. I

  • RFC adapter in XI 3.0 not working properly with BAPI in R/3 4.6C

    Here is the scenario.
    An XML file is received from our customer. This file contains purchase order information that is used to create a sales order in our SAP 4.6C system. Once the sales order is created an acknowledgement is generated and this is returned back to our customer in an XML format.  This scenario is working perfectly fine in our XI 2.0 system but is not working properly in our XI 3.0 test environment. Our custom function module in R/3 is a wrapper function that uses a standard SAP BAPI to create the sales order. Part of the function module does use the statement
    call function 'BAPI_TRANSACTION_COMMIT'
    The last thing the BAPI does is call another function module that using an RFC destination that will return and order acknowledgement.
    Here is what happens within XI and our SAP system.
    The XML file is received and mapped to our imported RFC. The RFC adapter is called and the information is passed onto SAP where our customer function module executed. The sales order is created within SAP without any problems and the second function module is called which references an RFC destination assigned to our XI 3.0 system. The information is sent back to XI and an appropriate file is created for our customer.  All seems to be working properly except that when the original RFC is sent from XI to SAP,  SAP creates a short dump stating
    "call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException:" Then it is put back into the que where 5 minutes later it executes again and trys to recreate the sales order in SAP. (again, this same function module executing from XI 2.0 works fine)
    I believe I have everything configured properly because the SAP side is being executed and I am successfully passing information back from SAP to XI. However the original function module in SAP is failing with the above error message. It appears that the original function module cannot communicate back with XI. I have had SAP looking at this issue and they have not been successful yet in solving this problem.
    Any ideas.
    Thanks,
    Jim d'Hulst

    Hi,
    I think the problem is with the send back of acknowledgement to XI. Does the DeliveryException state something about the sender agreement? I guess you are using a statement like below:
    CALL FUNCTION 'ZABCD'
    destination <tcp/ip destination>
    exporting
    input = ack.
    In that case, check whether the TCP/IP destination is working fine. Also, to be able to exchange message, the structure of the Function Module ZABCD needs to be identified as the sender in XI Configuration (Integration Directory).
    Also, check your config with the blog mentioned below:
    <a href="/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit">/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit</a>
    Regards,
    Amitabha

Maybe you are looking for