TS4002 iCloud was off for two hours, what about the messages sent in that particular time window?

my account was off for two hours due to overloaded mailbox, is it possible that some messages were sent to me at that time and therefore I won't receive those messages sent to my account during those two hours? Thanks...

Messages sent to you while your mailbox is full would've been bounced back to the sender.

Similar Messages

  • Account disabled for security reasons - what about the music I purchased ?

    Hello to you all Apple/Mac lovers ,
    I have a problem : my iTunes/Apple ID was disabled for "security reasons". That I suppose I can understand - although I can't figure out what danger I represent for Apple and iTunes.
    The problem though is that I purchased some music on the iTunes Store and now I need to re-enter my account ID and password to listen to it - but since the account was deleted the iTunes Store accept or recognize the ID/password combination and it tells me why : "This Apple ID has been disabled for security reasons.". This is how I first learned my account had been disabled.
    How can I listen to my music now ? Thanks in advance for your advice !
    Charles

    Yes I got it to work your link was the right one. Here's how it works : the security reason was that I or someone else tried to use my account and entered a wrong password 5 times or 10 times in a row. That's why my account was blocked. So all I - or anyone - has to do is to ask for a new password using Apple's password recovery tool, iForgot. There was on link on that page you sent me, or on one of the help and FAQ pages it linked to, so that's how I got there and that's how I did it. Thanks a lot !!
    Charles

  • Weird problem XP freezes after system was off for several hours after upgrading to X

    Mobo: Gigabyte GA-M55plus-S3G, Athlon 64 X2 3800 AM2, GB PC 3200, XFX Geforce 7600GT, 80 GB system dri've Barracuda 7200, Sata Raid 2x 300 GB Maxtor DiamondMax0, PSU Seasonic 600W, Ralink Wireless PCI card, Sony floppy, Pioneer DVR
    After the installation of the new soundcard I could reboot initially but not reboot when I used the PC a few hours/next day later. The blue XP indicator bar would freeze. Tried several re-installs. Then I re-installed everything including XP from the beginning. When re-installing the graphics card driver (old and latest version) system would hang with a blinking cursor.
    I also updated BIOS successfully to F6. Full re-installation -everything seemed to work. Re-booted several times- OK. Booted a few hours later- XP freezes when blue indicator bar has ben running for a few seconds.
    I have now the latest drivers for both soundcard, graphics card, BIOS and latest DirectX installed. I cannot understand why the system would reboot immediately after installation but freeze a few hours later. Is this some kind of hardware problem ?
    my friend and I using same components and we both have same problem!!
    REMOVING the X-Fi card solves the problem

    Ok, tried these installations:?Clean XP Install --> Mainboard Drivers --> Video Drivers --> Audio DriversClean XP Install --> Video Drivers --> Mainboard Drivers --> Audio DriversClean XP Install --> Audio Drivers --> Mainboard Drivers --> Video Drivers?I continued with several other reinstalls. After each one, Windows had NO PROBLEM rebooting and loading into the XP desktop. IF you turned off the PC, though, and back on again, Windows would lock up at the loading screen with the scrolling blue bar. Likewise, I still encountered the blinking cursor error when installing the video drivers AFTER the audio drivers but not vice versa. Either way, when I turned off the PC for the 'ultimate' deciding-test, X-Fi would not allow Windows to post. I pulled the X-Fi card out and voila, Windows loaded with no problems whatsoever. Of course I had no sound because they weren't the drivers for an SB Li've! 24-bit, you get the idea. My system is:?AMD 4600+ AM2GA-M55Plus-S3G (Gigabyte mainboard, rev .)2GB Corsair XMSPro Series DDR2-800 RAMeVGA 8800GTX PCI-e video cardMemorex DVDR+/-WWD 250GB SATAII HDSBLi've! 24-bit sound card?I was trying to upgrade to an X-Fi Fatalty Professional Gamer (without the I/O panel). I had no idea stupid NForce4 boards were incompatible with certain X-Fi products (and vice versa). Can anyone suggest some alterior sound cards that would work with mine and the second posters board? Or, recommend a suitable mainboard that is relati'vely 'new' and works flawlessly with the X-Fi series, so I don't run into a stupid issue like this again? I daresay, Creative, I've been a longtime supporter of your cards for YEARS, all the way back to 995 and THIS is unbelievable. One last question, has ANYONE tried the Fatalty series X-Fi on an actual Fatalty series mainboard?Message Edited by cookiemanx on 2-05-20062:08 AM

  • Working on two machines - what about the media cache ?

    I'm a long time user of FCP just getting my head around Premiere Pro CS5.5. I quite often work on the same project at work and at home. With FCP I simply duplicated the media onto another drive and just transported the project file on a flash disk - obviously rendering of effects would have to be done locally.
    Now with Premiere I notice there's the media cache which, as far as I can tell, is not necessarily anything to do with rendering and effects but related and applied to every clip.
    So my question is, will the media cache have to be built from scratch on each machine every time I move the project file ?
    If so, is there a way to avoid this so that I wont have to wait for it to build the media cache ?
    ....or on a 30 minute film with 15 hours of original media will this will this be a quick process so as not to be a problem ?
    I suppose what I'm really asking is how can I easily work on the same project in different locations ?
    Any help appreciated.

    At the moment my media cache is in my user library folder on the system drive.
    I would avoid using the system drive for media cache files.
    The best would be to have a separate, identically named drive
    (D for example) for your media cache.
    If you use an external drive for your media, make sure that
    you assign the same drive letter to this drive on both systems.
    ... and then duplicate the lot onto another drive ?
    I have never tried to wholesale copy media cache files from one
    system to another... preferring to allow Premiere to generate a
    cache for each system.
    One other thing. Suppose I capture some more media at work, can I just copy this media into the same location on my home drive and then will the media cache on my home machine just update the new media ?
    Yes.
    A good reference for disk setup can be found here:
    Generic Guideline for Disk Setup

  • I can no longer use the driver for my PSC 1600 Series as of two days ago.  The message tells me that the software is not available to update! Has anyone else encountered this.  I have OS 10.73 and a MacBookPro

    As of two days ago, the ability to print from my MacBookPro to the PSC 1600 Series vanished, indicating they do not have new software ready.  I have tried HP and Apple but have not received any help.  Can anyone help me to find whatever software that was either lost or not updated.  My iMac did have an HP update.

    Latest drivers for HP:
    http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US

  • My ipods been backing up for two hours is that normal?

    my ipods been backin up for two hours now. and the screen hasmt changed or anything. im trying to updated my ipod. how long does it normally take?

    Depends on size.  Usually about 2-5 minutes. Nome may take up to 20-30 if large storage space is being used.  Two hours is too long. Something is not right.m I feel an error message coming

  • I'm charging my iPad. But everytime it goes to turn on it will just turn off right away. This has been going on for two hours now. What do I do?

    I'm charging my iPad. But everytime it goes to turn on it immediately shuts off. This has been going on for two hours. What do I do?

    First, you can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
    If yes, it may not be charging properly. Be sure you are using the charger that came with the iPad. The iPad 2 requires a 10W charger. If you are using a different charger, including the one that came with an iPhone, it will charge very slowly if at all.
    Also try charging a different device with the charger to be sure it and the cable are working properly.

  • HT4515 My iphone 4 had been sluggish so I did the 2 button reset(?), now it's been frozen with the apple logo for two hours. What should I do?

    I have no clue what I'm doing. I held the home and lock button and ignored the slide to power down screen. Now my phone has been locked on the apple logo for two hours. I've tried hitting both buttons in all combinations. I had nearly a full battery before this fiasco. My phone is fully updated. Help me please?

    if you do not have the original owns apple id you will not be able to use the iPhone because of the activation lock you will need the original owners apple id to turn off findmyiphone if you do not have it or if you cannot get it you will not be able to use the iphone can you contact the original owner

  • My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

    My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

    Yes ive tried a different charger and it also nothing shows when i plug it in just makes a noise

  • When i was waiting for an hour for itunes to grading my 2nd generation ipod touch to a 4.2.1 and it was about done, it suddenly said the network connection timed out and that made the upgrading a fail. Why does it do that? and what does it mean?

    When i was waiting for an hour for itunes to grading my 2nd generation ipod touch to a 4.2.1 and it was about done, it suddenly said the network connection timed out and that made the upgrading a fail. Why does it do that? and what does it mean?

    Error -3259 is a network timeout error, usually. This article might help:
    http://support.apple.com/kb/TS2799

  • My Iphone 5 doesn't sync most of the time. First time I brought it to Apple Store they replaced the cable. Second time, was there for 4 hours no joke and still does the issue. Today, same thing. What do I do now!? :(

    First time I brought it to Apple Store they replaced the cable. Second time, was there for 4 hours no joke and still does the issue. Today, same thing. What do I do now!?

    Got it replaced last week. Turns out the dock was defective.

  • HT4623 I am upgrading my iPad to iOS 7 but the progress bar is at 1/4 position for two hours and not moving forward. Is there any problem with it? What should I do? Thanks.

    I am upgrading my iPad to iOS 7 but the progress bar is at 1/4 position for two hours and not moving forward. Is there any problem with it? What should I do? Thanks.

    This is a concern amoung many corporate users.  It's going to take somekind of policy change with apple.
    Enterprise support:
    Call enterprise support  (866) 752-7753  to create  a case ID number

  • My iphone was off for almost two weeks and once i cut it back on i only recieved text messages but no imessages that i KNOW were sent to my phone... is there anyway i can see them or no?

    My iphone was off for almost two weeks and once i cut it back on i only recieved text messages but no imessages that i KNOW were sent to my phone... is there anyway i can see them or no?

    Hi,
    In Messages on the Mac do you have the Preferences > Messages section set to "Save History when Conversations are Closed" ?
    This will store all IMs and iMessages in ~/Library/Messages/Archive.
    Use the Finder > Go Menu > Go to Folder and type that path into the Dialogue box that appears. (~/Library/Messages/Archive).
    They are stored in dated folders so some guessing/trail and error will be needed.
    You may find that if this was an iMessage and you  send the person a new message that the whole History with that Contact since you installed Mountain Lion/Started Messages may appear and that it is scrollable the closer you get to the "top" and the top may keep moving until all is on show.
    10:31 PM      Monday; December 24, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I have been trying for two days to download the new icloud 4 that was offered at the same time as the new iTunes just prior to iOS8 release.

    I have been trying for two days to download the new icloud 4 that was offered at the same time as the new iTunes just prior to iOS8 release.
    I keep getting installer package error messages, I uninstalled the previous version to see if that was the problem to now find that I cant reinstall it as the new version is the only one available.
    Im using Windows 7, I'm assuming Im not the only one with this problem.
    Would a complete uninstall and reinstall of Apple software be of any benefit or is that just a cure all solution when nobody has an answer?

    @Dakotaep
    I am so sorry to hear of your experience with purchasing your new Samsung Galaxy Note 3!  This definitely should have been resolved in your first call to us.  I would be glad to review your account and ensure the Edge Agreement is corrected.  Please accept my "Follow" request and send me a direct message so I can further assist.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter VZWSupport on Twitter.

  • I was billed for two game purchases I did not buy.What should I do?

    Hello, I received an email receipt from iTunes Store which shows that I was billed for two game purchases I did not buy.What should I do?
    It was "Brothers In Arms® 2: Global Front Free+, Medal Pack 3" by Gameloft 6.99 twice. Total charge 13.98.

    Contact the iTunes store, also see:
    http://www.apple.com/contact

Maybe you are looking for

  • Relocated iPhoto to external hard drive - now need to delete old library.

    I have relocated my iPhoto library to my external hard drive. I did this due to space issues on my internal hard drive. Now I need to delete my iPhoto library on my internal hard drive to give me more memory. What is the best, easiest, and safest way

  • How to locate the first insertion point on every page?

    I need to paste some same anchored objects on every page for exporting RTF format. So I need to locate the first insertion point on every page. Then, I use the code below (make a simple example): for(i = 0; i < app.documents[0].pages.length; i ++){  

  • Cannot resize Time Machine partition

    Hello all, I currently have a hard drive split into 2 partitions (both Mac OS Extended (Journaled)). One of the Time Machine partitions is far too big (for the backups it contains) and I want to reclaim some space as a regular data partition (for my

  • Web service Receiver Retry

    Hi, When using a Web service receiver (either HTTP, SOAP or Rosettanet) and the target system is off the air is it possible to get the Receiver to retry the message for a period of time? I know in JDBC or other CC it will retry every so often for a s

  • Business Place for document  could not be determined in Withholding Tax

    i have created business place in 6.0 version but when i m taking the reports for TDS remittances challans we have to give business place but its not showing business place can any one answer.