TS4002 Mail with multiple Bcc shows "sent" but was never delivered to anyone. Help?

Mail with multiple Bcc shows "sent" but was never delivered to anyone. Help?

Any guess at how to fix it or is a reinstall in my future?
Start by looking at the logs for an example. There will be some indication in the logs as to what happened to the message.
Depending on how busy your server is, this might be as simple as tail -f /var/log/mail.log while you send such a message from your mail client.

Similar Messages

  • I have tried to get iCloud - I get the message that a verification email has been sent to me but it never arrives - can anyone help?

    Can anyone help me to get iCloud on my new Mac - one message has said that I do have an account and another message tells me that a verification email has been sent but it never arrives - where has it gone?

    Then again, we may NOT benefit from the 'New' Instructions! My email is Verified (see Pix)
    Yet on the iPod the email is NOT Verified AND the Intstuctions to VERIFY NEVER COME!
    So, where is the Benefit of the NEW Instructions?

  • Mail Can be sent but is never delivered

    Hi,
    I was following the steps below to make it so a message can be received without a subject. After completing those steps I am running into an issue with my messages not getting to the recipient. If I send a message it acts as if it's been sent but the person getting the message doesn't and I get no message saying it could not be delivered. On the other end, if someone send me a message, I never get it and they get no message that tells them the message could not be delivered. This happens will all users of the server (any email address for the server). Any guess at how to fix it or is a reinstall in my future?
    Thanks.
    Yes, this is a default in Snow Leopard's Postfix configuration (which is the provided MTA).
    If you really, truly, don't want that, then see:
    http://www.icoretech.org/2009/09/reminder-empty-email-subjects-in-snow-leopards- postfix/
    For the record, the change needed is:
    edit
    /etc/postfix/customheaderchecks
    by commenting out the line:
    /^subject: *$/ REJECT empty subject header
    which is done by putting a "#" at the beginning of that line (no actual quotes) like so:
    #/^subject: *$/ REJECT empty subject header
    After which you should use the Terminal to issue:
    sudo postfix reload
    And check your logs (mail.log, system.log) for any errors in case you made a typo.
    Please, do NOT use a GUI editor or if you must use TextWrangler (shareware) which will at least let you authenticate as admin and not botch the permissions on that file.
    However it really is better to learn to use an editor like nano or better yet vi ...
    whatever happens, use the Terminal to check and to verify that the permissions of all files are preserved or things will break.

    Any guess at how to fix it or is a reinstall in my future?
    Start by looking at the logs for an example. There will be some indication in the logs as to what happened to the message.
    Depending on how busy your server is, this might be as simple as tail -f /var/log/mail.log while you send such a message from your mail client.

  • TS4002 i get messages to my ipad but not my phone can anyone help

    I have all the settings correct as it has only just started happening, anyone that sends me a text message is only being shown on my ipad and not on my i phone???

    Welcome to the Apple Community.
    Have you ensured that the settings > messages > send & receive addresses are the same on both devices.

  • Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0?  Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

    Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0?  Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

    @Satterp
    Not sure if you were responding to me or OP - my iPhone is on 5.1.  The OP at the time of writing was on 5.0.1.
    Also, the OP and I had setup our Hotmail as an Exchange server (similar to IMAP), not POP3.

  • Sending mail with multiple attachments

    hi.I wrote a code to send mail.but i need to send mail with multiple attachments.here is the code i wrote.what should i do to send the mail with multiple attachments.if i run this code iam able to send mails but not attachments.please help me
    <%@ page import="javax.mail.*,javax.mail.internet.*,java.util.Date,java.io.*,java.net.InetAddress,java.sql.*,java.util.Properties,java.net.*,javax.sql.*,javax.activation.*,java.util.*,java.text.*" %>
    <%@ page import="java.io.*,java.sql.*,java.net.*,java.util.*,java.text.*" %>
    <%
         String Attachfiles1="";
         String Attachfiles2="";
    String Attachfiles3="";
    if("Send".equalsIgnoreCase("send"))
              try
         String subject="",from="",url = null,to="";
         String mailhost = "our local host";
         Properties props = System.getProperties();
         String msg_txt="";
         String strStatus="";
    // byte[] bin=.....;
    //Adds Attechment:
    Multipart multipart = new MimeMultipart();
    BodyPart messageBodyPart = new MimeBodyPart();
    messageBodyPart.setText("Here are my attachments");
    multipart.addBodyPart(messageBodyPart);
    messageBodyPart = new MimeBodyPart();
    //first attachment
    DataSource source = new FileDataSource("C:\\img1.jpg");
    messageBodyPart.setDataHandler(new DataHandler(source));
    messageBodyPart.setFileName("C:\\Telnor1.jpg");
    multipart.addBodyPart(messageBodyPart);
    //Second attachment
    DataSource source2 = new FileDataSource("C:\\img2.jpg");
    messageBodyPart.setDataHandler(new DataHandler(source2));
    messageBodyPart.setFileName("C:\\Telnor2.jpg");
    multipart.addBodyPart(messageBodyPart);
    //etc...
    message.setContent(multipart);
    Transport.send( message );
    String mailer = "MyMailerProgram";
    to=request.getParameter("to");
    from=request.getParameter("from");
    subject=request.getParameter("subject");
    msg_txt=request.getParameter("message");
    props.put("mail.smtp.host", mailhost);
    Session mailsession = Session.getDefaultInstance(props, null);
    Message message = new MimeMessage(mailsession);
    message.setFrom(new InternetAddress(from));
    message.setRecipients(Message.RecipientType.TO,InternetAddress.parse(to, false));
    message.setSubject(subject);
    message.setHeader("X-Mailer", mailer);
    message.setSentDate(new Date());
    message.setText(msg_txt);
    BodyPart messageBodyPart = new MimeBodyPart();
    BodyPart messageBodyPart2 = new MimeBodyPart();
    Multipart multipart = new MimeMultipart(); // to add many part to your messge
    messageBodyPart = new MimeBodyPart();
    javax.activation.DataSource source = new javax.activation.FileDataSource("path of the file");
    messageBodyPart.setDataHandler(new DataHandler(source));
    messageBodyPart.setFileName("file_name");
    messageBodyPart2.setText("message"); // set the txt message
    multipart.addBodyPart(messageBodyPart);
    multipart.addBodyPart(messageBodyPart2);
    Transport.send(message);
    out.println("Message Sent");
    catch (Exception e)
    e.printStackTrace();
    if("Attachfiles".equalsIgnoreCase("attachfiles"))
    Attachfiles1=request.getParameter("fieldname1");
    Attachfiles2=request.getParameter("fieldname2");
    Attachfiles3=request.getParameter("fieldname3");
    %>
    <html>
    <body>
    <div class="frame">
         <form action="Composemail.jsp" method="post">
              <b>SelectPosition:</b> <select name="cars" >
    <option value="ABAP">ABAP
    <option value="saab">Saab
    <option value="fiat">Fiat
    <option value="audi">Audi
    </select><br><br>
    <table border="1" cellpadding="2" cellspacing="2">
    <tr><th>Name</th>
    <th>EmailId</th>
    <th>ContactNumber</th>
    <th>Position</th>
    </tr>
    <tr>
    <td>
    </td>
    </tr>
    </table><br>
    <b>SelectUser :</b><select name="cars">
    <option value="Administrator">Administrator
    <option value="saab">Saab
    <option value="fiat">Fiat
    <option value="audi">Audi
    </select>
    <br>
    <b>To :</b>&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<input type="text" name="to" size="72"><br>
    <b>From :</b>&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<input type="text" name="from" size="72"><br>
    <b>Subject :</b>&nbsp&nbsp&nbsp<input type="text" name="subject" size="72"><br>
    <%=Attachfiles1%><br><%=Attachfiles2%><br><%=Attachfiles3%><br><br>
    <b>Message:</b><br>
    &nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<textarea rows="10" cols="50" name="message">
    </textarea> <br><br>
    <b>AttachedFile:</b>&nbsp<input type="file" name="fieldname1" value="filename" size="50"><br><br>
    <b>AttachedFile:</b>&nbsp<input type="file" name="fieldname2" value="filename" size="50"><br><br>
    <b>AttachedFile:</b>&nbsp<input type="file" name="fieldname3" value="filename" size="50"><br><br>
    &nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<input type="submit" name="attachfiles" value="Attachfiles">
    <center>
    <input type="submit" name="send" value="Send" >
    </center>
    </form>
    </div>
    </body>
    </html>

    Create a separate MimeBodyPart object for each attachment, rather than reusing
    the same one over and over.

  • Sending mail with multiple attachment

    hi.
    i want to send mail with multiple attachment.
    i m succeed in sending multiple attachment but the second pdf is not open.
    its given error like "This file is damaged and could not be open.
    pls check my code. and
    give the solution....
    point should be assured...........
    hope all u r understand my problem..
    & tell me where is i m missing something.
    REPORT  YSDPASALE1_MAIL LINE-SIZE 110.
    data : year_month(6) type c.
    data : from_date like sy-datum,to_date like sy-datum.
    INITIALIZATION.
    year_month = sy-datum+0(6).
    CONCATENATE year_month '01' into from_date.
    to_date = sy-datum.
    ranges : temp for mkpf-budat.
    temp-low = from_date.
    temp-high = to_date.
    append temp to temp.
    DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
           jobname like TBTCJOB-JOBNAME,
           L_RELEASE(1) TYPE c.
    CONSTANTS : l_c_device(4)    VALUE 'LOCL'.
    DATA : t type i value 0.
    DATA : p_email1 like somlreci1-receiver,
            p_sender LIKE somlreci1-receiver.
    Data Declaration
    DATA: gd_recsize TYPE i,gd_recsize1 TYPE i.
    Spool IDs
    TYPES: BEGIN OF t_tbtcp.
            INCLUDE STRUCTURE tbtcp.
    TYPES: END OF t_tbtcp.
    DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
          wa_tbtcp TYPE t_tbtcp.
    Job Runtime Parameters
    DATA: gd_eventid LIKE tbtcm-eventid,
          gd_eventparm LIKE tbtcm-eventparm,
          gd_external_program_active LIKE tbtcm-xpgactive,
          gd_jobcount LIKE tbtcm-jobcount,
          gd_jobname LIKE tbtcm-jobname,
          gd_stepcount LIKE tbtcm-stepcount,
          gd_error    TYPE sy-subrc,
          gd_reciever TYPE sy-subrc.
    DATA:  w_recsize TYPE i.
    DATA: gd_subject  LIKE sodocchgi1-obj_descr,
          it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_mess_att1 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_mess_att2 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          gd_sender_type     LIKE soextreci1-adr_typ,
          gd_attachment_desc TYPE so_obj_nam,
          gd_attachment_desc1 TYPE so_obj_nam,
          gd_attachment_name TYPE so_obj_des,
          gd_mtitle LIKE sodocchgi1-obj_descr.
    Spool to PDF conversions
    DATA: gd_spool_nr LIKE tsp01-rqident,
          gd_destination LIKE rlgrap-filename,
          gd_bytecount LIKE tst01-dsize,
          gd_buffer TYPE string.
    CONSTANTS: c_dev LIKE  sy-sysid VALUE 'DEV',
               c_no(1)     TYPE c   VALUE ' ',
               c_device(4) TYPE c   VALUE 'LOCL'.
    Binary store for PDF
    DATA: BEGIN OF it_pdf_output OCCURS 0.
            INCLUDE STRUCTURE tline.
    DATA: END OF it_pdf_output.
    DATA: BEGIN OF mailstr OCCURS 0,
            p_email like somlreci1-receiver,
          END OF mailstr.
    DATA: mailtab like STANDARD TABLE OF mailstr WITH HEADER LINE.
    DATA: ypp18tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
          ymis008tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
          ysd15tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
          ymis10tab like STANDARD TABLE OF mailstr WITH HEADER LINE.
    SUBMIT YSDPASALE1 with bdt in temp
                           to sap-spool
                          with line-size = '255'
                           with KEEP_IN_SPOOL = 'X'
                           with IMMEDIATELY = ' '
                           WITHOUT SPOOL DYNPRO
                           AND RETURN
       NEW-PAGE PRINT ON
       DESTINATION l_c_device
       IMMEDIATELY ' '
       KEEP IN SPOOL 'X'
       NEW LIST IDENTIFICATION 'X'
       NO DIALOG.
       new-page print off.
      IF sy-batch EQ 'X'.
        PERFORM get_job_details.
        PERFORM obtain_spool_id.
        PERFORM convert_spool_to_pdf.
        select yemail as p_email into CORRESPONDING FIELDS OF TABLE ymis008tab
          from ymail
          where ytcode = 'YMIS008'.
    ELSE.
       SKIP.
       WRITE:/ 'Program must be executed in background in-order for spool & mail sending',
               'request to be created.'.
      ENDIF.
    wait up to 3 seconds.
      submit YSD_MONTHLY_SALES
                                USING SELECTION-SET 'MAIL'
                                to sap-spool
                               with KEEP_IN_SPOOL = 'X'
                               with IMMEDIATELY = ' ' "SPACE
                               WITHOUT SPOOL DYNPRO
                               AND RETURN
       NEW-PAGE PRINT ON
       DESTINATION l_c_device
       IMMEDIATELY ' '
       KEEP IN SPOOL 'X'
       NEW LIST IDENTIFICATION 'X'
       NO DIALOG.
       new-page print off.
        IF sy-batch EQ 'X'.
        gd_attachment_desc1  = 'YMIS10'.
        gd_mtitle = 'Monthly Sales Report'.
        PERFORM get_job_details.
        PERFORM obtain_spool_id.
        PERFORM convert_spool_to_pdf1.
       loop at it_mess_att.
        move it_mess_att1 to it_mess_att.
        APPEND it_mess_att.
       endloop.
       APPEND LINES OF it_mess_att1 to it_mess_att.
       free it_mess_att1.
        it_mess_att[] = it_mess_att1[].
        insert LINES OF it_mess_att1 into it_mess_att.
        APPEND LINES OF it_mess_att2 to it_mess_att .
         insert LINES OF it_mess_att1 into it_mess_att.
         insert LINES OF it_mess_att2 into it_mess_att.
       loop at ymis008tab into mailstr.
         p_email1 = mailstr-p_email.
          p_email1 = '[email protected]'.
           PERFORM process_email.
       endloop.
           clear mailstr.
          wait up to 5 seconds.
          SUBMIT rsconn01 WITH mode   = 'INT'
                          WITH output = 'X'
                          AND RETURN.
      ELSE.
        SKIP.
      ENDIF.
          FORM obtain_spool_id                                          *
    FORM obtain_spool_id.
      CHECK NOT ( gd_jobname IS INITIAL ).
      CHECK NOT ( gd_jobcount IS INITIAL ).
      SELECT * FROM  tbtcp
                     INTO TABLE it_tbtcp
                     WHERE      jobname     = gd_jobname
                     AND        jobcount    = gd_jobcount
                     AND        stepcount   = gd_stepcount
                     AND        listident   <> '0000000000'
                     ORDER BY   jobname
                                jobcount
                                stepcount.
      READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
      IF sy-subrc = 0.
        message s004(zdd) with gd_spool_nr.
        gd_spool_nr = wa_tbtcp-listident.
        MESSAGE s004(zdd) WITH gd_spool_nr.
      ELSE.
        MESSAGE s005(zdd).
      ENDIF.
    ENDFORM.
          FORM get_job_details                                          *
    FORM get_job_details.
    Get current job details
      CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
           IMPORTING
                eventid                 = gd_eventid
                eventparm               = gd_eventparm
                external_program_active = gd_external_program_active
                jobcount                = gd_jobcount
                jobname                 = gd_jobname
                stepcount               = gd_stepcount
           EXCEPTIONS
                no_runtime_info         = 1
                OTHERS                  = 2.
    ENDFORM.
          FORM convert_spool_to_pdf                                     *
    FORM convert_spool_to_pdf.
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
           EXPORTING
                src_spoolid              = gd_spool_nr
                no_dialog                = c_no
                dst_device               = c_device
           IMPORTING
                pdf_bytecount            = gd_bytecount
           TABLES
                pdf                      = it_pdf_output
           EXCEPTIONS
                err_no_abap_spooljob     = 1
                err_no_spooljob          = 2
                err_no_permission        = 3
                err_conv_not_possible    = 4
                err_bad_destdevice       = 5
                user_cancelled           = 6
                err_spoolerror           = 7
                err_temseerror           = 8
                err_btcjob_open_failed   = 9
                err_btcjob_submit_failed = 10
                err_btcjob_close_failed  = 11
                OTHERS                   = 12.
      CHECK sy-subrc = 0.
    Transfer the 132-long strings to 255-long strings
      LOOP AT it_pdf_output.
        TRANSLATE it_pdf_output USING ' ~'.
        CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~ '.
      DO.
        it_mess_att = gd_buffer.
        APPEND it_mess_att.
        SHIFT gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    ENDFORM.
    FORM convert_spool_to_pdf1.
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
           EXPORTING
                src_spoolid              = gd_spool_nr
                no_dialog                = c_no
                dst_device               = c_device
           IMPORTING
                pdf_bytecount            = gd_bytecount
           TABLES
                pdf                      = it_pdf_output
           EXCEPTIONS
                err_no_abap_spooljob     = 1
                err_no_spooljob          = 2
                err_no_permission        = 3
                err_conv_not_possible    = 4
                err_bad_destdevice       = 5
                user_cancelled           = 6
                err_spoolerror           = 7
                err_temseerror           = 8
                err_btcjob_open_failed   = 9
                err_btcjob_submit_failed = 10
                err_btcjob_close_failed  = 11
                OTHERS                   = 12.
      CHECK sy-subrc = 0.
    Transfer the 132-long strings to 255-long strings
      LOOP AT it_pdf_output.
        TRANSLATE it_pdf_output USING ' ~'.
        CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~ '.
      DO.
        it_mess_att1 = gd_buffer.
        APPEND it_mess_att1.
        SHIFT gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    ENDFORM.
          FORM process_email                                            *
    FORM process_email.
      DESCRIBE TABLE it_mess_att LINES gd_recsize.
      DESCRIBE TABLE it_mess_att1 LINES gd_recsize1.
      CHECK gd_recsize > 0 or gd_recsize1 > 0.
      PERFORM send_email." USING p_email1.
    perform send_email using p_email2.
    ENDFORM.
          FORM send_email                                               *
    -->  p_email                                                       *
    FORM send_email." USING p_email.
    CHECK NOT ( p_email IS INITIAL ).
      REFRESH it_mess_bod.
    Default subject matter
      gd_subject         = 'Subject'.
      gd_attachment_desc = gd_attachment_desc1 .
    gd_attachment_desc = 'YPP18 - Daily Highlights'.
    CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
      it_mess_bod        = 'Dear Sir,'.
      APPEND it_mess_bod.
    it_mess_bod        = ' '.
    APPEND it_mess_bod.
      it_mess_bod        = ' '.
      APPEND it_mess_bod.
      it_mess_bod        = 'kindly find the attached document'.
      APPEND it_mess_bod.
    it_mess_bod        = ' '.
    APPEND it_mess_bod.
    it_mess_bod        = 'Do not reply on this mail, It is generated from SAP'.
    APPEND it_mess_bod.
    it_mess_bod        = ' '.
    APPEND it_mess_bod.
      it_mess_bod        = ' '.
      APPEND it_mess_bod.
      it_mess_bod        = 'Regards,'.
      APPEND it_mess_bod.
      it_mess_bod        = 'Arpit Shah'.
      APPEND it_mess_bod.
    If no sender specified - default blank
      IF p_sender EQ space.
        gd_sender_type  = space.
      ELSE.
        gd_sender_type  = 'INT'.
      ENDIF.
    Send file by email as .xls speadsheet
      PERFORM send_file_as_email_attachment
                                   tables it_mess_bod
                                          it_mess_att
                                          it_mess_att1
                                    using "p_email
                                          gd_mtitle
                                         'Testing mail generated from SAP'
                                         'Daily Highlights Abstract Report - YPP18'
                                          'PDF'
                                          gd_attachment_name
                                          gd_attachment_desc
                                          p_sender
                                          gd_sender_type
                                 changing gd_error
                                          gd_reciever.
    ENDFORM.
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
          Send email
    FORM send_file_as_email_attachment tables it_message
                                              it_attach
                                              it_attach1
                                        using "p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription
                                              p_sender_address
                                              p_sender_addres_type
                                     changing p_error
                                              p_reciever.
      DATA: ld_error    TYPE sy-subrc,
            ld_reciever TYPE sy-subrc,
            ld_mtitle LIKE sodocchgi1-obj_descr,
            ld_email LIKE  somlreci1-receiver,
            ld_format TYPE  so_obj_tp ,
            ld_attdescription TYPE  so_obj_nam ,
            ld_attfilename TYPE  so_obj_des ,
            ld_sender_address LIKE  soextreci1-receiver,
            ld_sender_address_type LIKE  soextreci1-adr_typ,
            ld_receiver LIKE  sy-subrc.
    data:   t_packing_list like sopcklsti1 occurs 0 with header line,
            t_contents like solisti1 occurs 0 with header line,
            t_receivers like somlreci1 occurs 0 with header line,
            t_attachment like solisti1 occurs 0 with header line,
            t_object_header like solisti1 occurs 0 with header line,
            w_cnt type i,
            w_sent_all(1) type c,
            w_doc_data like sodocchgi1,w_doc_data1 like sodocchgi1.
    ld_email   = p_email.
      ld_mtitle = p_mtitle.
      ld_format              = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    Fill the document data.
      w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data1-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = it_attach[].
    For 2nd Attachments
    * Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach1 INDEX w_cnt.
      w_doc_data-doc_size = w_doc_data1-doc_size +
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach1 ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
    APPEND LINES OF it_attach1 to t_attachment.
      t_attachment[] = it_attach1[].
    APPEND LINES OF it_attach1 to t_attachment.
    Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 0.
      t_packing_list-body_start = 1.
    DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
    DESCRIBE TABLE it_mess_att LINES t_packing_list-body_num.
      DESCRIBE TABLE it_attach LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  'YMIS008'."ld_attdescription.
      t_packing_list-obj_name   =  'YMIS008'."ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
      clear t_packing_list.
    for 2 attachments
      data : a type i,b type i.
       a = t_packing_list-body_num.
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 0.
      t_packing_list-body_start = a + 1. "1
    DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
      DESCRIBE TABLE it_attach1 LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  'YMIS10'."ld_attdescription.
      t_packing_list-obj_name   =  'YMIS10'."ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    a = t_packing_list-body_num.
    clear t_packing_list.
    * Create attachment notification
    t_packing_list-transf_bin = 'X'.
    t_packing_list-head_start = 1.
    t_packing_list-head_num   = 1.
    t_packing_list-body_start = a + 1.
    t_packing_list-body_num = t_packing_list-body_num + 1.
    DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
    t_packing_list-body_num = a + t_packing_list-body_num .
    t_packing_list-doc_type   =  ld_format.
    t_packing_list-obj_descr  =  'YMIS10'."ld_attdescription.
    t_packing_list-obj_name   =  'YMIS10'."ld_attfilename.
    t_packing_list-doc_size   =  t_packing_list-body_num * 255.
    APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
    loop at ymis008tab into mailstr.
      t_receivers-receiver = mailstr-p_email.  "ld_email.
      t_receivers-receiver = p_email1.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'. "X   "Read Acknoledgement
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
    endloop.
       CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
    Populate zerror return code
      ld_error = sy-subrc.
    Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.
    Rgds.
    Arpit

    Hi Arpit,
    Take a look at the documentation of FM 'SO_DOCUMENT_SEND_API1' for parameter PACKING_LIST. I think you should set t_packing_list-head_num to a different value than 0 for the second attachment.
    Regards,
    John.

  • Send Mail with Multiple Attachment

    How to send mail with multiple attachment. The documents are in a table column BLOB. Read and attach in to mail directly.
    We don’t want save the documents into hard disk and attach to mail. Please Help
    If you have java procedure or Pl/Sql Procedure. I think pl/sql can’t. So please mail me code to [email protected] mail id. Thank you.
    Thanks in advance
    Selvam

    Hi all
    Thanks for your reply, already tried this methods, Its not working for my requirements. Because my attachment is can be any type like ‘pdf’,’doc’,’txt’,’xls’,’jpg’,….
    And also the Utl_mail is very slow. Its using RAW type.
    I can use the javamail package to solve this problem, this javamail package needs to download into server from there you can attach thus documents into mail. But I want fetch the documents and ate the same time I want attach to a mail. Like yahoo attach or msn attachment.
    Thank you,
    Selvam

  • Sending mail with multiple attachments in jsp

    hi .I wrote a code to send a mail in jsp.but now i need to send mails with multiple attachments.how can i send mail with multiple attachment.

    Create a separate MimeBodyPart object for each attachment, rather than reusing
    the same one over and over.

  • Sending UTL_SMTP mail with Multiple attachment

    Hi,
    My Environment ----> Oracle Database 11g r1 on Windows 2003 Server (64Bit).
    The below script i used for sending mail with single attachment now i am trying to send mail with multiple attachment please tell me how to achieve this
    DECLARE
    /*LOB operation related varriables */
    v_src_loc BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT.LOG');
    l_buffer RAW(54);
    l_amount BINARY_INTEGER := 54;
    l_pos INTEGER := 1;
    l_blob BLOB := EMPTY_BLOB;
    l_blob_len INTEGER;
    v_amount INTEGER;
    /*UTL_SMTP related varriavles. */
    v_connection_handle UTL_SMTP.CONNECTION;
    v_from_email_address VARCHAR2(30) := '[email protected]';
    v_to_email_address VARCHAR2(30) := '[email protected]';
    v_smtp_host VARCHAR2(30) := 'MAIL.EXPORT.COM'; --My mail server, replace it with yours.
    v_subject VARCHAR2(30) := 'MULTIPLE Attachment Test';
    l_message VARCHAR2(200) := 'TEST Mail for Multiple Attachment';
    /* This send_header procedure is written in the documentation */
    PROCEDURE send_header(pi_name IN VARCHAR2, pi_header IN VARCHAR2) AS
    BEGIN
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    pi_name || ': ' || pi_header || UTL_TCP.CRLF);
    END;
    BEGIN
    /*Preparing the LOB from file for attachment. */
    DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
    DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
    v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
    DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
    l_blob_len := DBMS_LOB.getlength(l_blob);
    /*UTL_SMTP related coding. */
    v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
    UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
    UTL_SMTP.MAIL(v_connection_handle, v_from_email_address);
    UTL_SMTP.RCPT(v_connection_handle, v_to_email_address);
    UTL_SMTP.OPEN_DATA(v_connection_handle);
    send_header('From', '"Sender"');
    send_header('To', '"Recipient"');
    send_header('Subject', v_subject);
    --MIME header.
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'MIME-Version: 1.0' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' boundary= "' || 'SAUBHIK.SECBOUND' || '"' ||
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Mail Body
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: text/plain;' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' charset=US-ASCII' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, l_message || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Mail Attachment
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: application/octet-stream' ||
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' filename="' || 'export.log' || '"' || --My filename
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    /* Writing the BLOL in chunks */
    WHILE l_pos < l_blob_len LOOP
    DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
    UTL_SMTP.write_raw_data(v_connection_handle,
    UTL_ENCODE.BASE64_ENCODE(l_buffer));
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    l_buffer := NULL;
    l_pos := l_pos + l_amount;
    END LOOP;
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Close Email
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || '--' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
    UTL_SMTP.CLOSE_DATA(v_connection_handle);
    UTL_SMTP.QUIT(v_connection_handle);
    DBMS_LOB.FREETEMPORARY(l_blob);
    DBMS_LOB.FILECLOSE(v_src_loc);
    EXCEPTION
    WHEN OTHERS THEN
    UTL_SMTP.QUIT(v_connection_handle);
    DBMS_LOB.FREETEMPORARY(l_blob);
    DBMS_LOB.FILECLOSE(v_src_loc);
    RAISE;
    END;
    Thank you
    Shan

    Hi Saubhik
    Thanks for your reply, below script i used to send mail with multiple attachments, plsql code is executing without any error messages and i am also able to receive mail with the multiple attachment.
    i used your code which u posted in OTN then i changed little bit as per my need, output is ok.but the problem is if i want to add one more file then i have to add more varaiables in the code. i want to make the code which i can add more attachments without adding more varaiables i don't know the way to do this. can u please give me some hints.
    Thanks for your help
    Shan
    Script Used:
    DECLARE
    /*LOB operation related varriables01 */
    v_src_loc BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT.LOG');
    l_buffer RAW(54);
    l_amount BINARY_INTEGER := 54;
    l_pos INTEGER := 1;
    l_blob BLOB := EMPTY_BLOB;
    l_blob_len INTEGER;
    v_amount INTEGER;
    /*LOB operation related varriables02 */
    v_src_loc2 BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT1.LOG');
    l_buffer2 RAW(54);
    l_amount2 BINARY_INTEGER := 54;
    l_pos2 INTEGER := 1;
    l_blob2 BLOB := EMPTY_BLOB;
    l_blob_len2 INTEGER;
    v_amount2 INTEGER;
    /*UTL_SMTP related varriavles. */
    v_connection_handle UTL_SMTP.CONNECTION;
    v_from_email_address VARCHAR2(30) := '[email protected]';
    v_to_email_address VARCHAR2(30) := '[email protected]';
    v_smtp_host VARCHAR2(30) := 'MAIL.EXPORT.COM'; --My mail server, replace it with yours.
    v_subject VARCHAR2(30) := 'MULTIPLE Attachment Test';
    l_message VARCHAR2(200) := 'TEST Mail for Multiple Attachment';
    /* This send_header procedure is written in the documentation */
    PROCEDURE send_header(pi_name IN VARCHAR2, pi_header IN VARCHAR2) AS
    BEGIN
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    pi_name || ': ' || pi_header || UTL_TCP.CRLF);
    END;
    BEGIN
    /*Preparing the LOB from file for attachment01. */
    DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
    DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
    v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
    DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
    l_blob_len := DBMS_LOB.getlength(l_blob);
    /*Preparing the LOB from file for attachment02. */
    DBMS_LOB.OPEN(v_src_loc2, DBMS_LOB.LOB_READONLY); --Read the file
    DBMS_LOB.CREATETEMPORARY(l_blob2, TRUE); --Create temporary LOB to store the file.
    v_amount2 := DBMS_LOB.GETLENGTH(v_src_loc2); --Amount to store.
    DBMS_LOB.LOADFROMFILE(l_blob2, v_src_loc2, v_amount2); -- Loading from file into temporary LOB
    l_blob_len2 := DBMS_LOB.getlength(l_blob2);
    /*UTL_SMTP related coding. */
    v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
    UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
    UTL_SMTP.MAIL(v_connection_handle, v_from_email_address);
    UTL_SMTP.RCPT(v_connection_handle, v_to_email_address);
    UTL_SMTP.OPEN_DATA(v_connection_handle);
    send_header('From', '"Sender"');
    send_header('To', '"Recipient"');
    send_header('Subject', v_subject);
    --MIME header.
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'MIME-Version: 1.0' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' boundary= "' || 'SAUBHIK.SECBOUND' || '"' ||
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Mail Body
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: text/plain;' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' charset=US-ASCII' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, l_message || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Mail Attachment01
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: application/octet-stream' ||
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' filename="' || 'export.log' || '"' || --My filename
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    /* Writing the BLOL in chunks */
    WHILE l_pos < l_blob_len LOOP
    DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
    UTL_SMTP.write_raw_data(v_connection_handle,
    UTL_ENCODE.BASE64_ENCODE(l_buffer));
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    l_buffer := NULL;
    l_pos := l_pos + l_amount;
    END LOOP;
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Mail Attachment02
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: application/octet-stream' ||
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' filename="' || 'export1.log' || '"' || --My filename
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    /* Writing the BLOL in chunks */
    WHILE l_pos2 < l_blob_len2 LOOP
    DBMS_LOB.READ(l_blob2, l_amount2, l_pos2, l_buffer2);
    UTL_SMTP.write_raw_data(v_connection_handle,
    UTL_ENCODE.BASE64_ENCODE(l_buffer2));
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    l_buffer2 := NULL;
    l_pos2 := l_pos2 + l_amount2;
    END LOOP;
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Close Email
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || '--' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
    UTL_SMTP.CLOSE_DATA(v_connection_handle);
    UTL_SMTP.QUIT(v_connection_handle);
    DBMS_LOB.FREETEMPORARY(l_blob);
    DBMS_LOB.FILECLOSE(v_src_loc);
    DBMS_LOB.FREETEMPORARY(l_blob2);
    DBMS_LOB.FILECLOSE(v_src_loc2);
    EXCEPTION
    WHEN OTHERS THEN
    UTL_SMTP.QUIT(v_connection_handle);
    DBMS_LOB.FREETEMPORARY(l_blob);
    DBMS_LOB.FILECLOSE(v_src_loc);
    DBMS_LOB.FREETEMPORARY(l_blob2);
    DBMS_LOB.FILECLOSE(v_src_loc2);
    RAISE;
    END;
    PL/SQL procedure successfully completed.
    Edited by: SHAN2009 on May 11, 2011 1:05 PM

  • How to send the mail with multiple file attachments ?

    Sending mails with multiple files as attachments.

    You need to start from the app, assuming that it has an email function, that contains the files that you want to send as attachments. The Photos app allows you to send up to 5 photos on the same email, but if you want to send multiple file types then you need an app that supports all those file types. I use the GoodReader app which supports quite a few document/file types (e.g. PDF, Excel, Word, pictures), and from that I can select multiple files (including different types) and attach them to the same email.

  • Mail with multiple gmail accounts sending messages from wrong email, other than the one i select

    mail with multiple gmail accounts sending messages from wrong email, other than the one i select:
    i'm using mail on osx 10.7 with multiple gmail accounts. when i create an email, i check to be sure i'm sending/replying from the correct account. after i send it, somehow it actually sends it from a different account, other than the one i've selected "from." this is evidenced by the reply email i receive. how can i fix this?
    in preferences, i have "send new messages from : account of selected mailbox"

    From the Mail menu bar, select
              Mail ▹ Preferences...
    The Mail preference dialog opens. Select the Composing tab from the row of icons at the top. From the menu labeled
              Send new messages from:
    choose
              Account of selected mailbox
    Note that this setting may have no effect if you start a new message while a VIP or smart mailbox is selected in the mailbox list. Those are saved searches, not actual mailboxes.
    If the problem remains, select the Accounts tab in the preference dialog, then select the affected account in the list on the left.
    In the Account Information pane, select the correct server in the menu labeled
              Outgoing Mail Server (SMTP)
    If there's only one server in the menu, select
              Edit SMTP Server List...
    and add a new server with the correct settings. If you're not sure how to do that, try the Mail Settings Lookup.
    Another possibility is that the wrong card in your address book is selected as yours. Select your card in the Contacts application. Then select
              Card ▹ Make This My Card
    from the menu bar.

  • I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

    I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

    first off , from the wired computer access the router using http://192.168.1.1 .. check the firmware version .. go to www.linksys.com/download and check the latest firmware available...if the router does not have the latest firmware , upgrade it first. .. after the firmware upgrade , reset and reconfigure the router
    if the router has the latest firmware , then reset the router for 30 seconds .. do a power cycle...access the router ui ..default password is admin..click on the "mac add clone" subtab , enable it and click clone....save the settings and do a power cycle..ensure that the wired computer is online
    on the router web ui , click on the wireless tab ..change the ssid - any non-linksys name , channel - 11 , security mode - wpa , beacon interval - 50 , fragmentation threshold - 2306 , RTS threshold - 2307 ..
    let me know if this helps you..

  • I have a new Mac and mail is showing thousands of incoming mails that do not show up on the computer.  does anyone know what is going on?

    I purchased a Mac OS x 10.9 in December. When using Mac Mail i get thousands of incoming mails that do not show up on my computer.  Does anyone have any idea what is going on?  this sure never happened on my old mac. i have three email accounts.  gmail, verizon and hotmail.

    I posted the same question a day ago with no response. I'm using an Acer x193w. You actually don't have to switch monitors to get it to work. Just make sure you turn off the monitor after shutting down the Mac mini (actually push the power button on the monitor, not just let it go to sleep). If you turn on the monitor (push the power button on the monitor), then power up the Mac mini, the monitor is recognized. The issue didnt exist with Snow Leopard for me. It only started after I started using Lion. Hope this issue gets fixed In a future OS update.

  • HT1338 I begin to download mountain lion update and it fail. Then I tried again and icon shows "waiting" but it never begin to download. What can I do?

    I begin to download mountain lion update and it fail. Then I tried again and icon shows "waiting" but it never begin to download. What can I do?

    RainbowGarner wrote:
    By install i presume you mean add it to the bottom of the machine ?
    Yes, and it's rather easy to do too.
    Your machine has two slots. These are the specs for a 2008 iMac (if your machine is different then check with Crucial.com and they will match the correct RAM for your machine)
    Maximum Memory
    6.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 200-pin PC2-6400 (800MHz) DDR2 SO-DIMM
    So all you need to do is visit Crucial.com or OtherWorld Computing to order it, and OtherWorld Computing has install videos.
    Here is one on YouTube. Easy pleasy.
    Just make sure to discharge any static electricity and not touch the contacts, just the plastic edges.
    https://www.youtube.com/watch?v=Fb_B3K1Za5Y

Maybe you are looking for

  • Pages for iPad, can't see all files

    I'm having some trouble with my iPad and I may have to do a full reset.  (you can read about the saga here: https://discussions.apple.com/message/15034366#15034366).  Most of my apps won't launch, including Pages, Keynote, etc.  But before I do, ther

  • Apple air to apple tv

    How can I get my apple air to play videos like I can on my ipad

  • TS3297 I tried to download NHL Game Center live and the purchase continued to fail

    I Have the correct info when introd to upgrade though the app, but it continues to fail. Why? Please do not allow my card to be charged 

  • Failed to goto purchased Content in iTunes & App Store

    I have recently updated my  iPod to "iOS 6.0.1" and when I want to look at my purchased in ether iTunes and App Store it shows that as if it is working while you wait about 20 sec and then shows the home screen. Anyone know how to contact apple about

  • Safari 4.0.3 crashes on e-mail entry Facebook

    I've been meaning to write about this for a while but everytime I go to respond to a Facebook mail message, it constantly crashes Safari. For e-mail replies in Facebook I use Firefox and that works fine. Has anyone else noticed this. It strikes me as