TS4006 I can't figure out why my mac has mobile me and not icloud, it's up to dayte

I'm trying to sync my new ipad with my imac but I seem to have mobile me on my mac not icloud and can't figure out how to change it. My software is all up to date. HELP!!!!

Welcome to the Apple Support Communities
Open  > About this Mac, and see Version. If it's 10.6 or earlier, you don't have the Mac OS X version that supports iCloud. You have to upgrade to OS X Lion (OS X 10.7) or Mountain Lion (OS X 10.8) to get iCloud on your computer.
First, if your version is 10.6, open  > Software Update and install the most recent version. Then, check if your Mac is supported > http://www.apple.com/osx/specs
If your Mac is compatible, make a backup of your data, open App Store and purchase Mountain Lion. Follow the steps to upgrade to OS X Mountain Lion, and after upgrading, open System Preferences > iCloud, and follow the steps to set up iCloud on the iMac.
If your version is 10.5 or earlier, you have to upgrade first to Snow Leopard

Similar Messages

Why are you not working? I can't figure out why this works in 1 doc, and not in another

I'm trying to take info from a cell on 1 spreadsheet and have it populate into a different one (pending if checkbox is true or not). I've been able to do it with 2 files but for some reason this one isn't doing what I need. If the checkbox is unchecked the text should stay in the new spreadsheet cell, if it's checked I want the row removed, but for reason instead of removing the row it just places a 0 in the cell.
This is what I want:
Like I said it works great on the other doc, just not on this new one. (the 2 docs vary with some of the text, but in the second image I've "checkboxed" out some of the text)
Please help!
Thanks!
Nikki

You may have the wrong cell reference (B2) in the second part of your formula. If B2 is empty, the result will be displayed as a 0. Did you mean to have A2 in both parts of the formula?
SG

Can't figure out why my page has a "gap" ?

Hi everyone, I'm new to building a website and have a question about my page. I will post two images, and the HTML code for my site. One image will be my template, the other image will be my site as it looks in Internet Explorer, I will post the HTML code for my template. The question I have is why does my page separate from my menu bar and my content div? When I have a blank page and preview it in Internet Explorer and Firefox the page looks fine, all the divs are attached. The second I write a sentence or a paragraph my page will have a gap between my menu bar and my content div. Check out the screen shot below. Thank you anyone who can help me. I'm currently using Dreamweaver C.S. 5.5.
The image below is not in "live view" see how the menu is attached to the content div?
The image below is how the site looks in "live view" and now the menu has a "gap" from the content div. I would like the site to be together with no gaps.
My HTML code for my template is pasted below.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>Untitled Document</title>



<link href="../style.css" rel="stylesheet" type="text/css" />
<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
body {
background-image: url();
background-repeat: repeat;
background-color: #000;
</style>
</head>
<body>
<div id="wrapper">
<div id="header"><img src="../assets/Banner Image.jpg" width="806" height="105" alt="Banner Image" /></div>
<div id="menu">
    <ul id="MenuBar1" class="MenuBarHorizontal">
      <li><a href="../index.html">About Us</a>      </li>
      <li><a href="../wreaths.html">Wreaths</a></li>
      <li><a href="../bouquets.html">Bouquets</a>      </li>
      <li><a href="../feedback.html">Feedback</a></li>
    </ul>
</div>
<div id="content">
    <p> </p>
    <hr />
    
    <p> </p>
</div>
<div id="footer"><a href="../index.html">About Us</a>  <a href="../wreaths.html">Wreaths</a> <a href="../bouquets.html"> Bouquets</a>  <a href="../feedback.html">Feedback</a></div>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"../SpryAssets/SpryMenuBarDownHover.gif", imgRight:"../SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>

Sorry it didn't post correctly I'm new and kind of confused on how to post the code. I also don't have a testing server. I'm just going by the preview option in dreamweaver. I will copy and paste the code directly from dreamweaver.
HTML code below:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>Untitled Document</title>



<link href="../style.css" rel="stylesheet" type="text/css" />
<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
body {
background-image: url();
background-repeat: repeat;
background-color: #000;
</style>
</head>
<body>
<div id="wrapper">
<div id="header"><img src="../assets/Banner Image.jpg" width="806" height="105" alt="Banner Image" /></div>
<div id="menu">
    <ul id="MenuBar1" class="MenuBarHorizontal">
      <li><a href="../index.html">About Us</a>      </li>
      <li><a href="../wreaths.html">Wreaths</a></li>
      <li><a href="../bouquets.html">Bouquets</a>      </li>
      <li><a href="../feedback.html">Feedback</a></li>
    </ul>
</div>
<div id="content">
    <p> </p>
    <hr />
    
    <p> </p>
</div>
<div id="footer"><a href="../index.html">About Us</a> <a href="../wreaths.html">Wreaths</a> <a href="../bouquets.html"> Bouquets</a> <a href="../feedback.html">Feedback</a></div>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"../SpryAssets/SpryMenuBarDownHover.gif", imgRight:"../SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>
this image is what the site looks like in live preview

I can't figure out why my mac no longer asks me if i want to save my passwords or usernames.

For some reason or another my mac isn't remembering or asking for usernames and passwords.My autofill is turned on.Have tried a couple things using Safari help,but still isn't working.Do some websites just not allow it?

Exactly so. Some web sites do not allow it.

I'm trying to install and the Application Manager continues to "quit unexepctedly" can't figure out why! Mac

Trying to get Photoshop and says it needs to be opened with the application manager. So as that is opening, it quits unexpectedly. Any ideas?

1)Click on the Finder and look for the options listed next to Apple Icon located at the top left corner of the Desktop screen and click on "Go" menu button and select "Utilities" option.
(Applications>Utiliites)
Locate Adobe Creative Cloud and Adobe Application Manager folder under Utilities window and trash both folders.
2) Trash Adobe Creative Cloud from Applications as well.
3) Click on the below link and download & run Adobe Cleaner tool :
Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up Selected" .
https://helpx.adobe.com/content/help/en/creative-suite/kb/cs5-cleaner-tool-installation-pr oblems/_jcr_content/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordi on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleaner Tool.zip
4) Click on the below link and download Adobe Application Manager and install the same .
Once the installation process is completed , the installation box will disappear.
Then open Applications folder and locate Adobe Application Manager launch icon and double click on it.
It will start update process and gets updated to Creative Cloud .
http://download.adobe.com/pub/adobe/creativesuite/cc/mac/ApplicationManager9.0_all.dmg
Then launch Photoshop cc app and check,

I can't figure out my ringtones anymore,has something changed on itunes i don't see the symbol in my music to let me know which song i can use as ringtones?

i can't figure out my ringtones anymore has it changes and i don't know about it?

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

[SOLVED] Home folder full & can't figure out why (MBs not matching up)

/home (as a partition) is 5GB and completely full... however, XFE, emelfm2, and PCManFM all see the home "folder" as being between 1.3GB and 1.8GB full... I am under the impression that I have a ghost file SOMEWHERE that even root can't properly detect, as it's not making any sense. What tools can I use to figure out why my /home partition is full?
Note: XFE, when checking the properties of the home partition vs home folder, it also shows the partition as full and the contents of the folder as 1.5GB or so. I can't shut down the computer, as I'm transferring large files from one flash drive to another (and my /tmp is on another partition and is 1% full out of 3.8GB. The comand 'df' returns that the partition is full as well... all tools, whether accessed via root or user, are telling me contradicting things: partition full, folder 40%(ish) and it's driving me mad! Any and all help is, and will be, GREATLY appreciated!
SOLUTION:
installed ncdu from repos, used command 'ncdu /home' and found which folder was the culprit... I had a large transfer going overnight that wasn't going when I got back in the morning, so the disk wasn't at 100% when I got back (not sure why any space was taken up by the transfer since the tmp folder is NOT in /home and the transfer wasn't to or from /home, but that may be an issue for another day).
Last edited by CPUnltd (2012-01-25 20:37:44)

trash was empty, lost+found could be a possibility... what is ncdu?
EDIT:
figured out what ncdu is, can't believe I'd never seen this program before!!! will be using it to track down the issue tomorrow! THANKS!!!
Last edited by CPUnltd (2012-01-25 08:58:32)

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there. For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color. For a basic object, there should be a fill and/or stroke.
What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted. Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something. You can drag those unwanted thingies from the Appearance palette into its own little trash can.

I tried to Skype someone but I can't see them but they can see me and I can't figure out why?

I tried to Skype somebody and they can see me but I can't see them and I can't figure out why?

I'll guess that you're upgrading from Snow Leopard? You should be able to start using your original install dvd by inserting the disc and restarting while holding the C key. Run Disk Utility from your install disc and try to repair the drive. Then try the upgrade again.

Apex bug? Items being cleared in session state - can't figure out why

I have an item that is being submitted with a value but is then being overwritten and set to null. I can't see any reason why the submitted value is being overwritten with null.
I have been debugging this problem for most of the day and can't figure out what is happening and was hoping someone in the forum might be able to shed some light.
Some details:
The item is on Page 0, has source type of "PL/SQL Expression or Function", a source expression of "V('REQUEST')", and Source Used = "Always".
I viewed the HTML source of the rendered page and can see the following HTML, so I know the item has a value when the page is rendered:
<input type="hidden" id="RENDER_REQUEST" name="p_t08" value="EDIT" />
I have used Firebug to view the HTTP POST body and can see that p_t08 is being correctly submitted with a value of "EDIT" in the post body.
When I run the page in debug mode and then view the debug log, I see that Apex is indeed setting this item to null:
     0.01500     0.01600     A C C E P T: Request="WIZ_NEXT"
     0.23400     0.00000     Session State: Save form items and p_arg_values
     0.24900     0.01600     ...Session State: Save "BRANCH_TO_PAGE_ID" - saving same value: ""
     0.24900     0.00000     ...Session State: Save "ROWS_PER_PAGE" - saving same value: ""
     0.26500     0.01500     ...Session State: Save "P0_CLEAR_WS" - saving same value: ""
     0.26500     0.00000     ...Session State: Saved Item "RENDER_REQUEST" New Value=""
I can't figure out why the item is being set to null.
This problem also does not occur on every page. The pages in question are a multi-step "wizard" that allows the user to navigate between steps with "Next" and "Previous" buttons. Since this is a page 0 item, it appears on every page in the wizard so I'd expect it to behave the same. When you open the wizard at step 1 and press next to go to step 2, the item (RENDER_REQUEST) is set correctly on step 2 of the wizard, BUT when you then click Next to go to step 3, RENDER_REQUEST is null on step 3. If you open the wizard at step 2 and press Next, RENDER_REQUEST is null on step 3.
I did find a work around, but it doesn't make any sense why it would work: if I move the RENDER_REQUEST item from the "Footer Items" region to a page level item (by using Edit All and setting its region to blank), then the problem goes away. If I move it back to the "Footer Items" region the problem reoccurs.
I am working on Application Express 4.0.2.00.07 on Oracle Database 11g Enterprise Edition Release 11.2.0.1.0.
Any help would be greatly appreciated!
Thank you.

Hi Patrick,
Thanks for the quick response. Unfortunately, I can't reproduce this on apex.oracle.com due because the app requires PL/SQL packages to be installed in several schemas, including some that require system grants (I gave a presentation at Oracle Open World a couple of years ago on some of the techniques I used in building this application that you attended; I think the session was called "Building Large Commercial Applications with Oracle Database 11g and Oracle Application Express").
Is there another way we can work together to debug this without reproducing it apex.oracle.com? For example, if you could send me an instrumented version of the APEX_040000.F procedure (or whatever procedure is clearing the session state) that has some additional APEX_APPLICATION.DEBUG calls, I could install it on my server, reproduce the error and send you the output.
Thank you,
Eric

Can't figure out why I'm dropping frames during capture

I'm dropping frames when capturing 1-hour Mini DV tapes and I can't figure out why.
I'm capturing on a Mac Pro (Early '08) with 8 GB of memory running FCP 7.0.3 and OS X 10.6.6. I'm capturing to a 4 TB G-Speed eS (eSATA) formatted as RAID 5 (Non-Journaled Extended) with about 750 GB of remaining space. I'm capturing via FireWire with a Canon GL-2. This should be a breeze for this system.
I've run Apple Disk Utility, Disc Warrior 4 and Techtool Pro 5 on the drives and they seem to be fine. I've unplugged all USB and FireWire devices besides the keyboard and mouse. No virus protection or background utilities are running. I've trashed preferences. AJA System Test shows a 286 MB/s write speed and 254 MB/s read speed. Blackmagic Disk Speed Test shows a 312 MB/s write speed and a 379 MB/s read speed. No other applications besides FCP are running. I edit 1080p HD footage on this system all day long with no issues but when I try to capture DV SD footage, I run into issues.
The dropped frames error does not ever occur in the same place on the tapes. The tapes are brand new and don't seem to have any time code issues. The only thing I haven't done is to defragment the hard drives. I wouldn't think that capturing simple DV video would be that demanding; the defragment for a 4 TB RAID would likely take 2 or 3 days.
Any other ideas on what's going on and how to try to fix it? Thanks!

Thanks for the prompt reply, Studio X. Yes, I'm using FireWire Basic and no other FireWire devices. I've switched FireWire cables, although I doubt that's the issue as the cable I was using was brand new and fit snuggly. Unfortunately, I don't have an alternate playback device right now. Would switching to Non-controllable device capture settings be worth a try?

All of a sudden my new iphone will not hold a charge even when it is not being used and I can't figure out why???

my battery drains even when iphone is not being used. It is a relatively new phone and this battery draining just started and I can't figure out why????

Yes, thank you. My apologies, I was typing one handed and did not add that.
Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH!

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Yes, I know. I have been working with HDV for some time. I am wondering why it doesn't render when it needs to.. the red and bright-green lines are above, and I've set the render settings such that ANYTHING I highlight and hit apple-R will render. But its not rendering at all.

I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts?

I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts? I have closed everyting I can, even took the phone to Verizon and they are not sure what is going on. My company email is active and pushes to the phone....I use Safari regularly to look up stuff for personal and work use. I am on Facebook but have turned it off in notifications. Four phones and a hotspot on the account....we have 6g and have never come close to it, until lately and it's my phone that's eating up the gigs. So what the heck is going on?

Go to Settings/Cellular and you can see how much data each app is using. You can Reset Statistics, then track all of the apps data usage.

I'm trying to make an in app purchase and it keeps telling me to come to the support page but I can't figure out why it won't let me do it

I'm trying to make an in app purchase and it keeps telling me to come to the support page but I can't figure out why it won't let me do it

And I have gone to the support and it was no help

TS4006 I can't figure out why my mac has mobile me and not icloud, it's up to dayte

Similar Messages

Maybe you are looking for