TS4006 ipad locked, won't shutdown or respond

ipad locked, will not shutdown or respond

Press and hold the home and sleep button together for 10 seconds.
Ignore the red slider if it appears and let go when you see the apple logo appear.
It should en reboot normally.

Similar Messages

  • IPad lock screen not responding or won't shut off

    HHow can I get to work

    Hey Bryan,
    For most issues when your iPad is not responding, take a look at the article below to go over some troubleshooting options. Start with holding the Sleep/wake button and home button for about 10 seconds or until you see the Apple logo and test to see if it is responding. After that, if you are still having the same issue where your iPad display is not responding or turning off, then you will want to contact Apple Support to assist you further.  
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
    https://support.apple.com/en-us/HT201412
    Take care,
    -Norm G. 

  • My ipad 2 won't rotate. i tried reseting it severally my "Use Side Switch" is set to Mute and there is no rotation lock sign close to the battery sign in the upper right side

    my ipad 2 won't rotate. i tried reseting it severally my "Use Side Switch" is set to Mute and there is no rotation lock sign close to the battery sign in the upper right side

    The software switch is in the task bar at the bottom. Double tap the home button and swipe to the right in the bottom of the screen. The speaker icon on the left would be where the software switch would be.
    If you don't see a lock icon in the upper right corner, the screen isn't locked, reboot your iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • IPad screen won't rotate.the locks are not on

    iPad screen won't rotate. I checked to make sure it wasn't lock. Can anyone help please

    Hi,
    There are three things you can do.
    1) Check the function of the side switch - in the Settings app, under General.
    2) Try a reset by holding the on/off and home buttons together until the Apple logo appears.
    3) If this fails, take it to an Apple Store.
    Hope this helps and Happy Holidays!

  • My brand new iPad mini won't rotate I have done factory reset still not working. If I lock and unlock on landscape or portrait it remains in that mode. Any ideas pretty sure I've tried everything suggested.

    My brand new iPad mini won't rotate done factory reset still not working. If I lock and unlock on landscape or portrait it remains in that mode. Any ideas pretty sure I've tried everything suggested such as off/on, reset, reboot, double checked lock off. It did work and I changed wallpaper and stopped motion, not sure if this related

    Reset all settings. Settings>General>Reset>Reset All Settings. Your iPad will reboot on its own. You will have to enter all of the device settings again, but no data will be lost.
    I eould not spend a whole lot more time trying to fix this, if the device is really brand new. I would take it back to where you bought it, bring the box, the charger, the cable and your receipt and if they can't get it fixed, return it and get another one.

  • HT4061 my ipad locked up and now it won't turn on

    My Ipad locked up on me and now it won't even turn on

    I've heard a lot of different theories on how to revive water-damaged iPods. You should search the forums--you will most likely get hundreds of similar posts. Methods I can think of off of the top of my head are:
    1. Put in a warm bowl of rice in a warm spot
    2. Put on a sunny windowsill for several hours
    3. (probably don't try unless you're totally desperate) put in a warm oven on a towel with the door open for a very short time
    These are only a few options... if you use the search option you will find many, many more.
    ~a

  • My iPad screen won't rotate. The rotation lock is not on and it is out of warranty. What should I do?

    My iPad screen won't rotate. The rotation lock is not on and it is out of warranty. I downloaded a gyroscope app and it says that I am always at 0 degrees. What should I do?

    Hi,
    There are three things you can do.
    1) Check the function of the side switch - in the Settings app, under General.
    2) Try a reset by holding the on/off and home buttons together until the Apple logo appears.
    3) If this fails, take it to an Apple Store.
    Hope this helps and Happy Holidays!

  • IPad screen won't rotate

    I have an iPad 2, out of warranty, that won't rotate (one of 150 iPads that are nearing the end of their usage cycle and will be sold at the end of the school year). It is stuck in landscape mode and won't rotate to portrait mode. In an attempt to fix it, I've tried everything short of opening it up: I've done a hard reset, I've done a system restore, and I even ran the battery clear down until nothing would come on the screen when the power button was pushed. Nothing has made any difference. (And no, the screen rotation is not locked, and no, the side switch is set to Mute, not Lock Rotation.)
    It makes me think the internal gyroscope is not functioning. Now here's where it gets interesting. I have downloaded the free Gyroscope app, on this and several other iPads for comparison. I can report two significant findings on the iPad that won't rotate properly: (1) All 3 axes of rotation on the gyroscope respond properly; and (2) the numbers on the defective iPad do not agree with the numbers on the other iPads. I.e., sitting side-by-side on a flat, level desk top, a "good" iPad reports Yaw: -173 degrees, Pitch: 0 degrees, and Roll: -1 degrees; while the defective iPad reports Yaw: 3 degrees, Pitch: 16 degrees, and Roll: -32 degrees. That leads me to believe that the gyroscope (or accelerometer) needs to be calibrated. However, I'm not aware of any facility for doing that. And furthermore, it's not clear that this has any bearing on the fact that it won't rotate.
    So... any ideas or suggestions? I am not averse to opening the device up, if there is a replaceable part. I haven't been able to find any info about such a task. My only other options are, as far as I know: Send it to Apple for replacement at $249, or sell it at a discount since it is not fully functional. Thanks in advance for any useful ideas. - JR

    Then you are not the usual user.
    If you can disassemble the iPad 2 then you may be able to replace the small custom circuit board containing the gyroscope and accelerometer chips (if you can source the part).

  • My iPad Mini won't switch on.

    I was playing on an app when all of a sudden my ipad just switched to the lock screen. I typed in my passcode 4 times and it would not let me in. So i locked it and when i clicked to unlock it again the screen never came on. I've tried to restore it on iTunes but it hasnt worked, it keeps saying 'error' and then when i try and hold on the button for it to turn on it won't turn on. I've updated my itunes to the lastest one and everything. Help please!!!

    It could be that the battery is completely drained. When this happens an iPad on the charger might not respond for some time. Connect your iPad to the charger that came with it and plug that into a known good wall outlet. Wait at least 30 minutes. Then reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot. If the iPad starts up let it continue to charge until the battery is at 100%. If the iPad still does not start make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Won't shutdown or restart unless hard boot - SMCFanControl Application

    I have quite a bit of installed hardware so I thought SMCFanControl would be a good idea. However, it seems that I can reproduce a problem I'm having when utilizing the SMC app.
    Problem:
    1. Won't shutdown or restart unless a power boot is performed
    2. Many applications lock up and won't even force quit.
    3. Can't reboot locked apps after force quitting when I re-click in dock.
    Noticed:
    I don't seem to have a problem unless I've at some point started ( or even after I've manually quit ) SMCFanControl. BTW I don't have it to start on login. But once I've used SMC after booting, no matter what, that is when the issues seem to begin. So I tried quitting prior to shutdown. Didn't work.
    Question: Has anyone else experienced unexplained lock ups, non forceable quits on apps, no shutdown or startup without boot, whom also has SMCFanControl? Has anyone found a solution to this problem as I REALLY NEED some sort of cooling mechanism. Because without SMC, I'm running about 150 farrenheit and I can't get the room any colder without locking up myself!
    P.S. I've tried resetting the PRAM or VRam or whatever Ram is reset when you power up, holding the power button in while then pushing Command, Alt, "R" at the same time until it does that long beep.
    The only solution found so far is unnacceptable, which is leaving SMC turned off permanently.
    Thanks,
    Videoguy_511

    Well Bababooey if you're comparing yourself to a Apple Genius Bar then you should already know my answer, your snarky remark get a snarky reply.  Why would I go to a salesperson to fix my computer problem when I can go directly go to the source itself.  I used to sell Apple computers over 8 years ago and was apple certified before the Genius bar existed. If I am to go about fixing an issue I can't fix on my own I will go to the source itself meaning Apple's programmers and developers - being UI UX Developer myself I know they should have QA'd all platforms and troubleshooted any arising issues. 
    This was also the first time in the 20 years I've been using a Mac that I even attempted to go on this forum which i thought would put me in connection with a certified Apple representative.  This turned out to be a complete waste of time just being a public forum with no Apple employee involved.  I was hoping to find a quick fix but in turn I was only frustrated with stupid responses such as yours that were in no way an answer to my original question. 
    BTW I fixed the issue on my own and without your help or Apples help. I'm glad if all forums point here regarding this issue because I now have the answer. The answer I was looking for from someone earlier was as simple as this {Download Maverick and reinstall the platform - it will take an hour to do but afterward 10.9.2 was installed and my computer is now able to shutdown and restart without having to do a hard boot.}  No more software update bar at top and no problems with my drive which I told both you and Grant - I know my computer better than you and I've probably been using them longer than you. 
    So again Babowa you were so wrong...... and I am right.
    Again anyone having the same problem, I suggest reinstalling Maverick and you'll be suprised 10.9.2 will work fine.

  • I am having an issue where whenever I am at the document list and do edit, to copy or delete a document the iPad locks up. Happens for both pages and numbers. Also happens on my iPhone, but only once in a while. Help.

    I am having an issue with both Pages and Numbers on my iPad. Whenever I am at the document list page and use "edit" to make a copy of a document or delete it, the iPad locks up. Happens almost every time. Also happens on my iPhone but only once in a while. Thought of completely redoing the iPad, but if it happens on the phone as well, won't help. ???

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • I have an Ipod touch 2nd generation 8gb. Metal peice fell out from the inside where the home button is and I lost it. Put the screen plug in and put the screen on and it would turn on but it won't unlock or respond to anything I try to do. PLEASE HELP ME!

    I have an Ipod touch 2nd generation 8gb. Metal peice fell out from the inside where the home button is and I lost it. Put the screen plug in and put the screen on and it would turn on but it won't unlock or respond to anything I try to do. PLEASE HELP ME!!!!!!!!!!!!!!!!!!!

    Look her and it may give insite on what is missing. Otherwise:
    Apple will exchange your iPod for a refurbished one for $99. Likely not worth it for a your iPod. They do not fix yours.
    Apple - iPod Repair price              
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Repair it yourself if you are up to it
    iPod Touch Repair – iFixit

  • Help ipad 1 won't start up ?

    My Ipad 1 won't start up, after the apple sign I just get a scrolling circle in the middle of the screen. It eventually switches itself off. Any ideas what I can do or is it finished ?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • IPad new 3rd generation hanged, not responding.

    iPad new 3rd generation hanged, not responding. It is one day new iPad 3rd Generation.
    Today it got hanged. please help me.

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • HT4060 My iPad 2 won't recharge after 4-6 hours

    My iPad 2 won't recharge after 4-6 hours and the screen is still black. Are there any methods of getting it to come back to life?

    Hi danyo002,
    If you are having issues with an iPad that isn't responding or won't turn on, you may find the troubleshooting steps in the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

Maybe you are looking for