TS4009 HI I have a problem with my ipad, its locked ans says ' this ipad cannot be backed because there isnt enough storage avaulable, manage your storage in stting' when I click on setting, it wont work. it has been jambed on this screen all day.
i have increased my storage too
Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release. You won't lose any data by doing this.
Similar Messages
-
I have a problem with iphone4
I bought a used and unlocked iphone4
old apple id because the first owner dies
please help me how to activate iphone4
I unlocked with icloudfherly nur arief wrote:
I unlocked with icloud
If you had already removed the device from 'Find My iPhone' in iCloud, then you jus tneed to powercycle the device in order to activate it.
Source: http://support.apple.com/kb/TS4515
"After the device is removed from the previous owner’s account, turn the device off by pressing and holding the Sleep/Wake button located on the top-right side of the device. Then restart your device and proceed with device setup as you would normally."
If it has not been removed, then the activation lock is still active.
If the previous owner cannot remove the device from their account there is nothing you can do unless the place you purchased it from will give you a refund.
Activation Lock: http://support.apple.com/kb/ht5818
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.
How do I check for Activation Lock before purchasing a used device?
When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
Follow each of these steps to make sure that you can use the device you purchase:
Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in to icloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process. -
Pleas help. Thanks.
There are any number of possibilies... you could have problems with runaway applications, causing your machine to overheat and setting the fans off, you could have bad fan sensors, etc.
Open Activity Monitor (Applications>Utilities) and see if you have any apps that may be hogging the CPU. Call back.
Clinton -
Anyone else having a problem with the iphone4s locking and not letting you in even though you keep using the only code you have entered from the begginning?
No. You are the first person out of 900 million users to have this problem.
-
I need some instructions to solve this problem, has anyone had the same problems? We just got an imac and changed from windows to mac. At first LR worked perfectly, all of a sudden I cannot import pictures anymore. Please help!!
The destination directory, where Lightroom is trying to copy photos to, does not have WRITE permission. Change your permissions.
-
tied to cloud backup and it was never done. She has a lot of memory tied up w pics and vids. Can I transer them from her 5c to new mini3 somehow
I'm wondering why don't you try to import all her videos and photos to computer for backup: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support. And you can't directly copy content from iPhone to iPad until you use a third-party tool. If you resist on copy videos and pictures from iPhone to iPad, I think you need to copy videos and pictures from iPhone to computer first, and then sync the to the iPad mini.
-
I have set up another itunes account by accident. I do not have access to this email as it must belong to someone else. An email verification to set up a new account has been sent to this email know. How do I stop this account from being created?
To change accounts on your Mac, go to System Preferences, sign out of the current account, then sign into the new account. When you sign out of the current account it will delete synced data from your Mac. Assuming your data (such as contacts, calendars, etc.) is in the other iCloud account, it will be synced to your Mac when you sign into this account.
-
I have a problem with the indicator for power on the side of my HP DV6-1341el.
I have a problem with the indicator for power on the side of my HP DV6-1341el. Insert the adapter's power jack on the notebook in front of the LED battery charging works, windows detects that the battery is charged, but if I use the diagnostic programs, they tell me they found that the computer is running on battery power and not AC mode.
Where is the problem?
I have also made the maneuver for the recognition by the operating system of the battery and does not seem to be there the problem.
If I use the laptop without battery in AC mode happens that led to the side of the notebook blinks twice, three times and then goes off when I put the power jack.Go into the Device Manager. Expand the battery device, select the ACPI-Compliant Battery Control Method device, right-click it and select uninstall. After you have done that, right-click any device in the Device Manager and select scan for hardware changes. Your operating system will reinstall the ACPI-Compliant Battery Control Method device.
Post your results whether they are negative or positive to keep us posted.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
I have a problem with macbook pro OS 10.5.8 and cannot play youtube anymore, before Yes
i have a problem with macbook pro mac os 10.5.8 and cannot play youtube but before ther is no problem abou this. now there is warning sign to install adobe flash player, but when i install adobe it said cannot be compatible, and I went to the apple store, they sid need to upgrade the system to mac IOS 10.6 and i dont want to spend much... somebody to help me this
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
This, Adobe Flash Player 12.0.0.70, is the current version of Flash. It should work with Snow Leopard or later. -
I have a problem with the sattalite signals , need...
hello everybody ,
I have a problem with my nokia N95 8g pertaining the sattelite signal for the GPS as there is no sattelite singal at all , it used to be OK before but suddenly there is no singals , I have formatted the mobile but there was no benifit .
Could u pls. help me as I am really deseprate cause I used to use the maps frequently before this problem , and I tried all the ways but no benifit .
Thanks n Rgrds.
THEWOLF777Delete the ipod updater-redownload it from Apple.
The file you downloaded became corrupted and will not work. -
I am unable to open a PDF file in Firefox 4. I have no problem with IE8
I am unable to open a PDF file in Firefox 4. I have no problem with IE8
Hi Nupoorv,
Thanks for contacting us.
Could you please provide some details like from where you downloaded your pdf , and what happens when you click on 'Open in Adobe Reader' .
On tap on 'Open in Adobe Reader' does Adobe Reader application come in focus .
You can follow think link also which provide details of how you can open documents in Adobe Reader http://forums.adobe.com/docs/DOC-2532
Let us know if you still face problem.
Thanks
-Satyadev -
hello,I have a problem with security questions.i don't remember the answer,please help me. i don't know how to manage this
You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104775) -
I recently moved my iMovie Library and all of its contents to an external hard drive. I then erased the library and all of its contents from my iMac HD and created a new library. Now when I try to import video from my DV camera I get this message: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again. There is no way to set a storage location in Preferences. I have chosen an Event in the middle drop down box. But it still will not import. Any help will be greatly appreciated.
My iTunes library is set up the way I said in the top post and works totally fine.
Yes, and that is the default structure to which I was referring. iTunes will organize it that way automatically unless people do start changing settings (in which case they should know what they are doing and how iTunes works with library files and media structure.)
Both ways work, the advantages of mine would be that should iTunes try looking fo a library, it will always be in the default location.
It makes people think they have to change media location in preferences. They do not unless they want to relocate media only and leave other things on their internal drive (in which case there is no point in copying library files to the external, and you certainly wouldn't want to then delete them from your internal).
Downside is that then should someone move their iTunes library to anther computer they need to remember to get those library files on the external hard drive.
Just copy the whole iTunes folder and it will get the library files to the other drive in one step, along with all the other files.
Your post has good stuff but it makes a move appear intimidating and look like people have to do a lot of organizing to move the collection. It also throws in extra steps (namely altering preference settings) that could cause confusion or even make a mess of things. If people leave iTunes to default preference settings (which most people do) the move summarizes into a short line: Copy a folder and hold an extra button the next time you start iTunes.
Note that the instructions in the link I provided earlier do also include many steps, but those are to ensure that everybody does have it all organized correctly before simply copying the iTunes folder. In the end it is just a simple action. -
when i am connecting ipod with laptop, an error is coming that "this ipod cannot be used because the apple mobile device services is not started???
please revert.Did you try to restart the service, as described in this article?
http://support.apple.com/kb/TS1567 -
I have a problem with iCal.Since 2 days ago,I couldn't add new event in iCal on my ipad2.It Keeps saying 'No calendar has been set", then if I go to Calendar field,choose one calendar,it gives this msg "That event doesn't belong to that event store". I can add event from iCloud and from my iCal on my iMac. Please help
Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)
Maybe you are looking for
-
I did a search and the only instance of that name is with the Tom Tom GPS folder and that is not an exe file
-
Picture quality when burning disc
When i burn a slideshow and view it on a tv the picture becomes very bright just before it move to the next slide. Any suggestions?
-
DBV-0200,block already marked corrupted on physical standby database
Dear all, we are facing the problem of *'DBV-200 that is block already marked corupted on standby database'* on all index datafile, we facing this error in oracle 10.2.0.3 version of database when we are running dbv utility. but this error can't foun
-
Print to Tape/Export to Quicktime
I'm having problems printing my project to tape. It jumps to the middle of my project (as if that's the beginning) when exporting to Quicktime or trying to print to tape
-
I am trying to implement a basic RMI class, using the example in "Programming Weblogic RMI" book. I used java rmic instead of wls rmic. The only difference from the book example is that I am tyring to bind remote object implementation from within a s