TS4026 error code smtp;550 5.7.1

I am unable to send email. I received a message that I have exceeded my daily sending limits.
error code smtp;550 5.7.1

The Actual Problem i am facing in my EXCHANGE SERVER 2010 is that.
I can send emails successfully to other Domains and Mails are also working internally and can access through Outlook Web Access. But the problem is that i could not receive emails from other domains. Whenever we send message from other Domain or G mail etc
we got the following error
smtp; 550 5.7.1 Unable to relay for *******@tns.com.sa.
I
can TELNET my port 25 and its working fine
I tried several times to create my HUB TRANSPORT Connectors but still same issue.
Kindly suggest appropriate solution to get rid of this Issue.
Farhan Iqbal

Similar Messages

Diagnostic-code: smtp;550 message was blocked by server (GWAVA blocked

I am having problems sending emails
diagnostic-code: smtp;550 Message was blocked by server (GWAVA blocked: ipreputation, reference ID: ,
The message is as follows:
Reporting-MTA: dns;BLU004-OMC4S31.hotmail.com
Received-From-MTA: dns;BLU436-SMTP7
Arrival-Date: Fri, 6 Jun 2014 09:57:27 -0700
Final-Recipient: rfc822;xxxxxx@xxxxxxx
Action: failed
Status: 5.5.0
Diagnostic-Code: smtp;550 Message was blocked by server (GWAVA blocked: ipreputation, reference ID: str=0001.0A0B0201.5391F2F9.0044,ss=1,re=0.000,recu=0.000,reip=0.000,cl=1,cld=1, fgs=0)
Any help would be great its been happening for a few days

Have you setup a Accepted Domain for your SMTP domain on the Exch server?
http://technet.microsoft.com/en-us/library/bb124423(v=exchg.141).aspx &
http://technet.microsoft.com/en-us/library/bb124911(v=exchg.141).aspx#EMC
And you may want to setup an EAP -
http://technet.microsoft.com/en-gb/library/bb125137(v=exchg.141).aspx
Sukh

Diagnostic-code: smtp;550 No Such User Here

Could someone help me with this:
The user allready exist.
Your message cannot be delivered to the following recipients:
Original-recipient: rfc822;[email protected]
Final-recipient: rfc822;[email protected]
Action: failed
Status: 5.0.0 (Remote SMTP server has rejected address)
Remote-MTA: dns;mydomain.com (TCP|111.111.111.111|55964|222.222.222.222|25)
(domain.com ESMTP Exim 4.69 #1 Thu, 19 Feb 2009 23:34:30 +0200 )
Diagnostic-code: smtp;550 No Such User Here

How To: Direct Message and robind_vzw

Smtp;550 5.1.1 RESOLVER.ADR.RecipNotFound; not found

hello All,
I am getting the above error when i send a mail from external domain. I have exchange server 2010 on and O365 account. From last 2 months i am not using O365 account and even active sync is also not working. And recently O365 subscription was over. So now
non -synced users are not getting mails from external domain. Please find the below complete error.
The email address you specified couldn't be found or is invalid. It may be due to a bad entry in your Outlook or Outlook Web App recipient AutoComplete cache. Use the steps below to delete the entry from the cache:
Click New mail.
In the To field start typing the recipient's name or email address until the recipient appears in the drop-down list.
Use the DOWN ARROW and UP ARROW keys to select the recipient, and then press the DELETE key.
Then resend your message – delete and retype the recipient’s name or e-mail address before sending it.
For more tips on how to resolve this issue see DSN code 5.1.1 in Exchange Online.
Diagnostic information for administrators:
Generating server: DM2PR08MB368.namprd08.prod.outlook.com
[email protected]
Remote Server returned '550 5.1.1 RESOLVER.ADR.RecipNotFound; not found'
Original message headers:
Received: from BLUPR08CA0072.namprd08.prod.outlook.com (10.141.200.52) by
DM2PR08MB368.namprd08.prod.outlook.com (10.141.55.154) with Microsoft SMTP
Server (TLS) id 15.0.1010.18; Wed, 20 Aug 2014 16:55:58 +0000
Received: from BN1AFFO11FD021.protection.gbl (2a01:111:f400:7c10::118) by
BLUPR08CA0072.outlook.office365.com (2a01:111:e400:88d::52) with Microsoft
SMTP Server (TLS) id 15.0.1010.18 via Frontend Transport; Wed, 20 Aug 2014
16:55:56 +0000
Received: from mail-vc0-f171.google.com (209.85.220.171) by
BN1AFFO11FD021.mail.protection.outlook.com (10.58.52.81) with Microsoft SMTP
Server (TLS) id 15.0.1010.11 via Frontend Transport; Wed, 20 Aug 2014
16:55:56 +0000
Received: by mail-vc0-f171.google.com with SMTP id hq11so9516889vcb.30
for <[email protected]>; Wed, 20 Aug 2014 09:55:55 -0700 (PDT)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
d=gmail.com; s=20120113;
h=mime-version:date:message-id:subject:from:to:content-type;
bh=UIg592euC1okrJydwvvU1ssSy4p+p3l+Nh+vpxrcn/Y=;
b=yhVCdHhs616U6+U4K7UqoQwm+eUrFgIJMKqmEUzREUgdgcgFtoM9+5MABnFeEjW7Cz
RT7vVTlH+v7nH/iW+nntxCRi4I3cqLUcAY8AgM5kGVoGBURCqo66dVbxWghB0HMDiZ7D
1AMDv1gez/PG8pmOpSVtkg1xmp0a/19vlPcqJ5ZRBlU/HdAuEYRp9M8ZBZLXgYF9RfDg
PphDqDLqDZ+Y7yNVIbAoC3gHA9kqfqAgWp3HOqRWb5TcRWI7sb9pj5ifYPQBVDJ6ozAS
jGfhzvxWHnbBPzVKqcCmkgrUVcSX8cUCrZqBjSk6c616nHSjVy6fRHnPdyIJ0Nzd6cnk
FR5Q==
MIME-Version: 1.0
X-Received: by 10.52.136.196 with SMTP id qc4mr15358922vdb.22.1408553755439;
Wed, 20 Aug 2014 09:55:55 -0700 (PDT)
Received: by 10.52.178.168 with HTTP; Wed, 20 Aug 2014 09:55:55 -0700 (PDT)
Date: Wed, 20 Aug 2014 22:25:55 +0530
Message-ID: <CA+GyOUV7n1V35=GRmzciyuocnAFngUN1Kba0XUbbT2QjEUb4Cg@mail.gmail.com>
Subject:
From: sai siva kumar <[email protected]>
To: <[email protected]>
Content-Type: multipart/alternative; boundary="bcaec51b12bd3d78fb0501127a3a"
Return-Path: [email protected]
X-EOPAttributedMessage: 0
X-Forefront-Antispam-Report: CIP:209.85.220.171;CTRY:US;IPV:NLI;EFV:NLI;
X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:;UriScan:;
Final-Recipient: rfc822;[email protected]
Action: failed
Status: 5.1.1
Diagnostic-Code: smtp;550 5.1.1 RESOLVER.ADR.RecipNotFound; not found
Thanks

Hi,
Have you tried deleting the bad entry in your Outlook or Outlook Web App recipient AutoComplete cache as the error message suggested? If not, please have a try on it.
In addition, this issue may also occur if the on-premises mail-enabled user who represents the moved mailbox isn't stamped correctly with the target address. The Exchange server generates an NDR message because the on-premises Active Directory Domain Services
(AD DS) can't locate the user in order to route the mail correctly. To resolve it, please refer to this KB article:
http://support.microsoft.com/kb/2685437
Also have a look at the following article regarding 5.1.1 error:
http://technet.microsoft.com/en-us/library/dn479208(v=exchg.150).aspx
Since this forum is for questions and feedback related to Office Client side issue, you can also post a question in Exchange Online forum for further assistance:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thank you for your understanding.
Best Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

The SMTP Error Code from a message that was not sucessfully delivered ?

hello,
I'm developing an aplication that uses Java Mail and
send emails, but I need to get the error code if this
email was not sucessfully delivered, use
mail.smtp.dsn.notify to destination return an email in case
of failure.
Thaks for your help.
rania+

Do you mean the SMTP server reply codes? These are the codes that are returned when the client tries passing the message to the server. The are from RFC 821 (http://www.ietf.org/rfc/rfc0821.txt).
500 Syntax error, command unrecognized
[This may include errors such as command line too long]
501 Syntax error in parameters or arguments
502 Command not implemented
503 Bad sequence of commands
504 Command parameter not implemented
211 System status, or system help reply
214 Help message
[Information on how to use the receiver or the meaning of a
            particular non-standard command; this reply is useful only
            to the human user]
220 <domain> Service ready
221 <domain> Service closing transmission channel
421 <domain> Service not available,
closing transmission channel
[This may be a reply to any command if the service knows it
            must shut down]
250 Requested mail action okay, completed
251 User not local; will forward to <forward-path>
450 Requested mail action not taken: mailbox unavailable
[E.g., mailbox busy]
550 Requested action not taken: mailbox unavailable
[E.g., mailbox not found, no access]
451 Requested action aborted: error in processing
551 User not local; please try <forward-path>
452 Requested action not taken: insufficient system storage
552 Requested mail action aborted: exceeded storage allocation
553 Requested action not taken: mailbox name not allowed
[E.g., mailbox syntax incorrect]
354 Start mail input; end with <CRLF>.<CRLF>
554 Transaction failed

SMTP Error Code : 530 . For more information, see your SMTP server manual.

Hello,
I am Getting
"SMTP Error Code : <530>. For more information, see your SMTP server manual" error, While configuring SMTP in Data Services 4.0 system. I have tried executing the SMTP_TO function on another DS machine which has 3.2 verion installed, but getting the same error.
FYI,
1) Able to telnet the Exchange server through Data service machine
2) Maintained SMTP settings in Data services server manager
3) using the same SMTP server host name in other SAP systems (ECC,BI,PI) etc and able to send mails.
Regards
Puneet

Thanks for the reply Julian.
There was a problem in SMTP relay rights on Exchange server. Able to send mails now. Thanks!
Getting another problem wherein I am not able to send mails to multiple recipients i.e. If I specify 5 recipients in SMTP_TO function and execute the job then Every individual is getting E-Mail having there own ID in TO field, other Id's are not gettting displayed in TO field.
I hve checked note "1276348 - smtp_to function - multiple recipients not displayed"
Settings mentioned in the note have been done and job is getting executed without any error but the mails are not getting delivered.
It would be great if anyone can suggest on how to proceed here.
Thanks & Regards
Puneet

Smtp Error : Internal error: CL_SMTP_RESPONSE ESMTP error code is not known

Hi Guru's,
i have configured smtp mail service for internal purpose. all the setups in SCOT is made.
and now i am recieving error :
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known .503 503 Bad sequence of commands
i searched solution in forums but i couldnt find. kindly advice me for any changes.
thanks in advance.
-AruN,

hi,
detailed log for the said error code:
Internal error: CL SMTP RESPONSE ESMTP error code is not known._503_503 Bad sequenc
Message no. XS829
Diagnosis
An error occurred in program CL
Error text: SMTP
Additional information:
RESPONSE
ESMTP error code is not known._503_503 Bad sequenc
System Response
Message processing terminated.

Error code when e-mailing

Hey everyone
I'm having some problems with my work e-mail coming through at home and wonder if anyone can help me.
I am trying to e-mail a Polish address and keep getting the following error code 550.....
Remote host said: 550 Please%see%http://www.openspf.org/Why?id=info%40delphismedicallimited.co.uk&ip=77.238.189.21&receiver=58313.v.t... : Reason: mechanism [DATA]
Can anyone shed any light on this please?
Thanks in advance.

vofsanity2 wrote:
Isamb44,
If you click on the link in the 550 message the following section explains the problem:
58313.v.tld.plrejected a message that claimed an envelope sender address of [].58313.v.tld.pl received a message from nm7.bullet.mail.ird.yahoo.com (77.238.189.21) that claimed an envelope sender address of []
However, the domain delphismedicallimited.co.uk has declared using SPF that it does not send mail through nm7.bullet.mail.ird.yahoo.com (77.238.189.21). That is why the message was rejected. "
This means that delphis medical limited does not allow you to send emails that use it's domain name in the From field through SMTP servers that it has not approved.
I suspect you may be replying to an email from the Polish company so rather than just click Reply you also need to change the reply so that it comes from your personal email address and not a company one.
Hi. Please can you alter your post to remove the email address.
I also suggest that Isamb44 edit their post to remove the email address.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Error sending emails to Internet: Failed to connect. Winsock error code: 10051

Our exchange 2013 CU2 (CAS+MBX, Win2012) was sending emails to Internet using another server (a kerio email server) and outbound internet email was working as expected.
We have now removed the Kerio server, I also removed the kerio_Send_Connector I was using to send emails to internet and I also changed the email domain in Exchange to be authoritative. I created a new Internet send connector with default values, but the same
bad behavior is present.
Our Exchange 2013 receives emails internally and externally with no problems. The problems are sending emails to Internet. I am suspecting something in the firewall but i need to do some more research.
If from the same Exchange server I telnet to an Internet email host:25 I do get the smtp banner but as soon as I start typing HELO/EHLO I get disconnected and errors are logged.
Errors when sending emails to any emails address (this is from an email sent to google, all others are the same):
Remote Server at aspmx3.googlemail.com (74.125.136.26) returned '400 4.4.7 Message delayed'
7/1/14 9:52:44 a. m. - Remote Server at aspmx3.googlemail.com (74.125.136.26) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted
failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 74.125.136.26:25'
I cannot find any references from such Winsock error that are related to Exchange 2013.
So far all email is being queued at the Exchange Server 2013. I am afraid to install CU3 and make things worse.
Thanks for your comments.

Just check if the receive connector settings are set to fine
check the send connector properties and see whether it is set to use DNS to route emails through external DNS/Internal DNS or smart host .
Do a telnet to external domain like hotmail,yahoo and see at what transaction you are getting an error
Enable verbose logging, restart the transport service and check if you get the same error in the verbose logs as well
Get in touch with the ISP and see if the port 25 for Outbound SMTP is opened.
YOu can check if SMTP Proxy is enabled in the firewall. If so disable the SMTP proxy in the firewall and check.
Good Luck!!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.
That will encourage me - and others - to take time out to help you.
Regards,
Sathish

Windows Update Error code 80072ee2

I am running Windows 7 Home Premium 64 bit and I keep getting the error code 80072ee2 Windows could not search for Updates. I know there are several other posts but none of them are helping me. I have tried the steps from microsoft but nothing worked. Please
help.
I am seriously thinking about going back to XP
Dell Inspirion 580
OS: Windows 7 Home Premium 64-bit
2.67 GHz
Intel (R) Core (TM)i5 CPU

Hi MowGreen,
I'm sure you have guessed by the log pasted below, that the MS Safety Scanner did not find anything to correct on my computer.
I believe the first line is the version information you were requesting be included in the log. Your help has been Mowst appreciated.
Thanks, ZG
9/6/2012
21:10:28:519
1124
1984
Report
WER Report sent: 7.6.7600.256 0x80246008 5F64A8C3-B42C-48F7-9925-0429E9C548D2 Download 101 Unmanaged
9/6/2012
21:10:28:550
1124
1984
Report
CWERReporter::HandleEvents - WER report upload completed with status 0x8
9/6/2012
21:10:28:550
1124
1984
Report
WER Report sent: 7.6.7600.256 0x80246008 6C35C3C6-E8A6-4C26-AD5A-2B12C6097919 Download 101 Unmanaged
9/6/2012
21:10:28:550
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:566
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {CC0ADE33-EC3B-4D16-A281-338396F58DCB}]
9/6/2012
21:10:28:566
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:566
1124
1984
Report
CWERReporter::HandleEvents - WER report upload completed with status 0x8
9/6/2012
21:10:28:566
1124
1984
Report
WER Report sent: 7.6.7600.256 0x80246008 024F10D4-B471-422D-B393-39456CBA18D8 Download 101 Unmanaged
9/6/2012
21:10:28:582
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:582
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:28:597
1124
1984
Report
CWERReporter::HandleEvents - WER report upload completed with status 0x8
9/6/2012
21:10:28:597
1124
1984
Report
WER Report sent: 7.6.7600.256 0x80246008 A114A5E9-DB76-43EF-8430-0A556240C6E9 Download 101 Unmanaged
9/6/2012
21:10:28:597
1124
1984
Report
CWERReporter finishing event handling. (00000000)
9/6/2012
21:10:28:613
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:613
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {41F7683B-E86D-4181-8A0E-D54B8072E290}]
9/6/2012
21:10:28:613
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:613
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:628
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:28:644
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:675
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {145FE545-BF00-427A-B87C-9C554830CE50}]
9/6/2012
21:10:28:675
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:691
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:691
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:28:691
1124
1984
Report
CWERReporter finishing event handling. (00000000)
9/6/2012
21:10:28:738
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:753
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {AFDCB546-0D0D-48E7-BD0C-EDAE3E15573D}]
9/6/2012
21:10:28:753
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:769
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:769
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:28:800
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:816
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {BCBB3F8F-80B6-4B04-84B5-4D28B1E5DCC6}]
9/6/2012
21:10:28:816
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:816
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:816
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:28:847
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:894
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {FA090999-3B89-4DD1-82B2-6E16B0841E24}]
9/6/2012
21:10:28:894
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:909
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:909
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:28:925
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:956
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {1A56B5AF-C1B0-4D82-BF13-296BAB975FA5}]
9/6/2012
21:10:28:956
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:28:956
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:28:972
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:29:018
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:050
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {5F64A8C3-B42C-48F7-9925-0429E9C548D2}]
9/6/2012
21:10:29:050
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:29:065
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:065
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:29:065
1124
1984
Report
CWERReporter finishing event handling. (00000000)
9/6/2012
21:10:29:065
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:112
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {6C35C3C6-E8A6-4C26-AD5A-2B12C6097919}]
9/6/2012
21:10:29:112
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:29:128
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:128
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:29:143
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:174
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {024F10D4-B471-422D-B393-39456CBA18D8}]
9/6/2012
21:10:29:174
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:29:190
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:190
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:29:190
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:206
1124
1b70
AU
>>## RESUMED ## AU: Download update [UpdateId = {A114A5E9-DB76-43EF-8430-0A556240C6E9}]
9/6/2012
21:10:29:206
1124
1b70
AU
# WARNING: Download failed, error = 0x80246008
9/6/2012
21:10:29:206
1124
1b70
AU
AU checked download status and it changed: Downloading is paused
9/6/2012
21:10:29:206
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:29:206
1124
1b70
AU
Currently showing Progress UX client - so not launching any other client
9/6/2012
21:10:29:221
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:30:173
1124
478
AU
BeginInteractiveInstall invoked for Install
9/6/2012
21:10:30:173
1124
478
AU
Auto-approved 0 update(s) for install (for Ux), installType=0
9/6/2012
21:10:30:173
1124
478
AU
WARNING: BeginInteractiveInstall failed, error = 0x8024000C
9/6/2012
21:10:30:641
1124
181c
AU
AU received handle event
9/6/2012
21:10:30:641
1124
181c
AU
No featured updates notifications to show
9/6/2012
21:10:30:641
1124
181c
AU
UpdateDownloadProperties: 1 download(s) are still in progress.
9/6/2012
21:10:30:641
1124
181c
AU
WARNING: Failed to change download properties of call, error = 0x80070057
9/6/2012
21:10:30:641
1124
181c
AU
Triggering Offline detection (non-interactive)
9/6/2012
21:10:30:641
1124
181c
AU
AU setting pending client directive to 'Install Complete Ux'
9/6/2012
21:10:30:641
1124
181c
AU
WARNING: Pending directive, 'Install Complete Ux', is not applicable
9/6/2012
21:10:30:641
1124
181c
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:30:641
1124
181c
AU
9/6/2012
21:10:30:641
1124
181c
AU
## START ## AU: Search for updates
9/6/2012
21:10:30:641
1124
181c
AU
9/6/2012
21:10:30:672
1124
181c
AU
<<## SUBMITTED ## AU: Search for updates [CallId = {20F11704-E4BA-4C5C-AEC5-50B82EF637A5}]
9/6/2012
21:10:30:672
1124
1984
Agent
9/6/2012
21:10:30:672
1124
1984
Agent
** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
9/6/2012
21:10:30:672
1124
1984
Agent
9/6/2012
21:10:30:672
1124
1984
Agent
* Online = No; Ignore download priority = No
9/6/2012
21:10:30:672
1124
1984
Agent
* Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and
DeploymentAction='Uninstallation' and RebootRequired=1"
9/6/2012
21:10:30:672
1124
1984
Agent
* ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
9/6/2012
21:10:30:672
1124
1984
Agent
* Search Scope = {Machine}
9/6/2012
21:10:35:891
1124
181c
AU
No pending client directive
9/6/2012
21:10:40:984
1124
1984
Agent
WARNING: Failed to evaluate Installed rule, updateId = {818701AF-1182-45C2-BD1E-17068AD171D6}.101, hr = 80242013
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {1BDDBE8D-16EF-4E1D-A8EB-826691A014F6}.101 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {3F08EED3-8FC3-4253-8FA9-F301430C4B24}.101 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
Update {7EBDB020-BD62-4790-AF2B-DFB52E42F91F}.104 is pruned out due to potential supersedence
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {D5FD720E-0F2C-4363-AA87-6AD4A6D11B0E}.105 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
Update {E2B689E4-DF53-4FCF-BBA7-F4174F30D763}.105 is pruned out due to potential supersedence
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {FA090999-3B89-4DD1-82B2-6E16B0841E24}.107 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {BCBB3F8F-80B6-4B04-84B5-4D28B1E5DCC6}.107 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {6C35C3C6-E8A6-4C26-AD5A-2B12C6097919}.104 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
Update {71F60E65-AC13-4EA3-8651-AE4E72188DB2}.100 is pruned out due to potential supersedence
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {41F7683B-E86D-4181-8A0E-D54B8072E290}.100 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {C7C2C625-E811-43B2-A6F6-29A86848B7BD}.100 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {AFDCB546-0D0D-48E7-BD0C-EDAE3E15573D}.101 to search result
9/6/2012
21:10:42:748
1124
1984
Agent
* Added update {145FE545-BF00-427A-B87C-9C554830CE50}.102 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {6252C914-64DF-49CE-8EBF-8CD3C6B3E0D9}.101 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {B4413613-7062-4F6B-A1E4-7A957409A51F}.101 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {A114A5E9-DB76-43EF-8430-0A556240C6E9}.100 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {024F10D4-B471-422D-B393-39456CBA18D8}.100 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {5F64A8C3-B42C-48F7-9925-0429E9C548D2}.100 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {CC0ADE33-EC3B-4D16-A281-338396F58DCB}.101 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {8FF20708-AEEF-4F79-B3C1-23905E105D41}.100 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Added update {1A56B5AF-C1B0-4D82-BF13-296BAB975FA5}.101 to search result
9/6/2012
21:10:42:749
1124
1984
Agent
* Found 18 updates and 74 categories in search; evaluated appl. rules of 1103 out of 1964 deployed entities
9/6/2012
21:10:42:780
1124
1984
Agent
9/6/2012
21:10:42:780
1124
1984
Agent
** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
9/6/2012
21:10:42:780
1124
1984
Agent
9/6/2012
21:10:42:807
1124
1b70
AU
>>## RESUMED ## AU: Search for updates [CallId = {20F11704-E4BA-4C5C-AEC5-50B82EF637A5}]
9/6/2012
21:10:42:807
1124
1984
Report
CWERReporter finishing event handling. (00000000)
9/6/2012
21:10:42:807
1124
1b70
AU
# 18 updates detected
9/6/2012
21:10:42:808
1124
1b70
AU
9/6/2012
21:10:42:808
1124
1b70
AU
## END ## AU: Search for updates [CallId = {20F11704-E4BA-4C5C-AEC5-50B82EF637A5}]
9/6/2012
21:10:42:808
1124
1b70
AU
9/6/2012
21:10:42:808
1124
1b70
AU
No featured updates notifications to show
9/6/2012
21:10:42:809
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:42:812
1124
1b70
AU
Successfully wrote event for AU health state:0
9/6/2012
21:10:42:815
1124
18c0
AU
Getting featured update notifications. fIncludeDismissed = true
9/6/2012
21:10:42:815
1124
18c0
AU
No featured updates available.
9/6/2012
21:10:47:808
1124
1984
Report
CWERReporter finishing event handling. (00000000)

Outlook 2011 for Mac Data is corrupt Mail could not be sent Error code: -19943

Why am I constantly getting this error?
What does this error mean?
How do I fix this?
This MacBook Air belongs to a VIP in our company. She is under the impression that she has received a lemon, due to the following experiences (verbatim):
Random beeping noise coming from machine. Unexplainable. No obvious pattern.
Machine randomly sounds like an airplane taking off. Fan running constantly.
Unable to view Sent folder in Outlook. Periodically.
Unable to view Sent items. Periodically.
Calendar items/invites/meetings do not display accordingly.
Unable to accept/decline meeting invitations.
Pinwheel constantly displays. Forced to reboot due to freezing.
Constantly receiving 'Data is corrupt' error message in Outlook.
Constantly receiving 'An internal server error occurred. The operation failed' in Outlook.
I understand the majority of these issues points towards the Office/Outlook application, but why don't any of the troubleshooting methods resolve or alleviate any of the aforementioned symptoms at all?
No one else in my company with this software is receiving this message.
I have rebuilt the database 3 times.
I have reinstalled the software twice.
All software is up-to-date.
Why doesn't Apple support this software?
Why doesn't Microsoft support this software?
Every forum I search regarding Office for Mac results in a never ending loop of both companies panning the issue off to the other and nobody takes responsibility.
Is there anyone out there willing to take the time to assist me and fully exhaust their knowledge to present some sort of solution towards this issue?
I am fully committed to this discussion and will provide any and all information needed in order to fix the issue.
Why are there other users with the same software who are NOT experiencing the same issues?
As a last resort, I am aware backing-up the profile/account and restoring the OS is an option. What if this plan of action doesn't solve anything? What if the problem persists?
My technical knowledge of Apple/Mac devices is limited, and I would appreciate any advice/suggestions/support on the matter, as this is a high priority issue and I would like to learn from this so as to avoid any similar issues that I may encounter in the future.
Thank you in advance for your help.

Hello Warren, which Mail App?
Generally,
SMTP error 554 (Transaction failed) is one of the most vague error codes, but is typically caused by something in the From or To headers that server doesn't like.
In other words, the problem is in the sender or recipient email address.
It can be caused by
The sender address isn't valid.
The server thinks this email is spam or server IP address has been blacklisted
A spam trap identifying your machine as a relay, or as a machine not trusted to send mail from your domain.
http://www.fox.ra.it/forum/13-submissions-via-email/444-smtp-error-5-5-4-transac tion-failed.html
To see if it's your provider, What's my ip...
http://www.whatismyipaddress.com/
Start with these three, check SpamCop or SpamHaus to see if your IP is there...
http://spamcop.net/bl.shtml
http://www.spamhaus.org/lookup.lasso
http://www.spamhaus.org/zen/
Sometimes an ISP will bloc a whole other ISP too, if it's the source of too much SPAM.

Smtp;550 5.7.1 Unable to relay #SMTP#

our dev wrote a script that'll send an email externally but it bounces with the following error:
smtp;550 5.7.1 Unable to relay> #SMTP#
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may be preventing delivery.
It works fine if I want to send the email internally tho. The server is on the allowed list on the receive connector and anonymous users is checked in the permissions groups tab
using exchange 2010 SP3

Hi Cinekc,
Besides SSorin's suggestion, I would like to clarify the following things:
1. Please use telnet to port 25 to test SMTP communication. Here is a thread for your reference.
Exchange server unable to send mail outside
http://social.technet.microsoft.com/Forums/exchange/en-US/ce90b2ea-d2d2-4f15-ab56-43da021c52c9/exchange-server-unable-to-send-mail-outside?forum=exchange2010
2. Please contact recipient side to verify if there is any limitation. What's more, I recommend you ask the recipient side add yourdomain.com into "The sender's domain is" exception of Anti-Spam transport rule and check the result.
Here is a thread for your reference.
Exchange 2013 reject message with unintelligible reason
http://social.technet.microsoft.com/Forums/exchange/en-US/e4c19d74-460e-46ff-81bb-e97dedfcec93/exchange-2013-reject-message-with-unintelligible-reason?forum=exchangesvradmin
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

POP Email on WP8 (Lumia 920) - Error Code 80004005

Hello Astra 2025,
Sorry to contact you on a differnet issue.
I have had problems with my POP e-mail on my Lumia since i got it so cant receive my woork e-mails.
Can you please point me towards a discussion that references this or do you have some background knowledge as I have hit a dead end with Nokia....
please read the following thread:-
http://answers.microsoft.com/en-us/winphone/forum/wp8-wpemail/pop-email-on-wp8-lumia-920-error-code-...

I do not know how to set up an IMAP account in my shared hosting account with Plesk, which provides POP3/SMTP access to emails.
I am a Microsoft Partner, develop Microsoft based solutions, and genuinely like the Microosft platform. Still, after about 6 months and many hundreds of dollars later, I find myself running out of patience. How long should I be patient for a solution, when Nokia/Microsoft/T-Mobile will not give me a solution or be part of the process.
Microsoft Partner Support, as mentioned, told me this morning in response to a follow-up from yesterday that there is nothing else that they can do and that the situation is out of their hands. If it is out of their hands and they do not want to do anything about it, then what about me?
Should I bite the bullet, return the phone, and sadly jump onto the Samsung Galaxy S4 Android bandwagon? If I do that, I will feel cheated, as I really would like to use Windows. I kind of like the Windows Phone 8 interface. How long should I be patient?
Email is a big issue. I am sure that there are other issues too, just I am not aware of it left.
By the way, I never received an Portino update. The last update was the one that Microsoft gave back in November, which caused the problem in the first place.
Thanks for your comment. :-) It is nice to know that I am not alone I am not alone in suffering with this problem.
I really am thinking that this 80004005 error is a deal breaker, which is so sad.
By the way, Nokia cannot do anything. Microsoft owns the OS and it is up to the carrier, T-Mobile USA in my case, to do something about the problem. Microsoft posts major updates, which causes breaks and annoyances. T-Mobile is resonsible for minor updates and fixes. T-Mobile, as you can tell by visiting t-mobile.com (as of 5/2/2013) is no longer interested in the Windows platform (okay Catwalk announced, but that has the same problem. Catwalk is a Lumia 922 or so, as I understand things). T-Mobile will not post an update. They never have, so why start now?

Internal Update Server Error Code help

Error code in FlashInstall.log
[warning] 1407 12044 vs [warning] 1403 12030
I am trying to figure out why my internal update server wont connect past the certificate handshake. I can get it to work with a self signed certificate from the machine name but am trying to build a solution for my whole organization using our Root CA with a custom name for the particuler site.
Any information would be helpful or suggestion for an alternative to using the internal update server since it is near impossible to troubleshoot when i have no idea what these warning codes mean.
Thanks,
Xenon

Now i am getting these in my log but no update is being applied.
2013-10-10+17-32-25.523 [info] 1628 adobeupdate.domain.net
2013-10-10+17-32-25.527 [info] 1629 adobeupdate.domain.net
2013-10-10+17-32-25.530 [info] 1614
2013-10-10+17-32-25.534 [info] 1615
2013-10-10+17-32-25.537 [info] 1618
2013-10-10+17-32-25.542 [info] 1608
2013-10-10+17-32-25.546 [info] 1612
2013-10-10+17-32-25.550 [info] 1620
2013-10-10+17-33-8.143 [info] 1628 adobeupdate.domain.net
2013-10-10+17-33-8.147 [info] 1629 adobeupdate.domain.net
2013-10-10+17-33-8.151 [info] 1614
2013-10-10+17-33-8.154 [info] 1615
2013-10-10+17-33-8.157 [info] 1618
2013-10-10+17-33-8.162 [info] 1608
2013-10-10+17-33-8.166 [info] 1612
2013-10-10+17-33-8.171 [info] 1620
2013-10-10+17-33-9.762 [info] 1628 adobeupdate.domain.net
2013-10-10+17-33-9.767 [info] 1629 adobeupdate.domain.net
2013-10-10+17-33-9.771 [info] 1614
2013-10-10+17-33-9.774 [info] 1615
2013-10-10+17-33-9.778 [info] 1618
2013-10-10+17-33-9.782 [info] 1608
2013-10-10+17-33-9.786 [info] 1612
2013-10-10+17-33-9.790 [info] 1620
2013-10-10+17-33-11.84 [info] 1628 adobeupdate.domain.net
2013-10-10+17-33-11.88 [info] 1629 adobeupdate.domain.net
2013-10-10+17-33-11.91 [info] 1614
2013-10-10+17-33-11.94 [info] 1615
2013-10-10+17-33-11.98 [info] 1618
2013-10-10+17-33-11.102 [info] 1608
2013-10-10+17-33-11.106 [info] 1612
2013-10-10+17-33-11.123 [info] 1620

[ERROR CODE DPL.DS.5107] problem when deploying an app (Bad version number)

Dear colleagues,
please find attached a Java exception trace, where I tried to deploy a sample application to my CE 7.1 (only Java version).
I use JDK version 1.6.0_06: do you know this problem? Do you have any hints?
Compatibility level is put to "6.0": I read only about problems related to JDK 1.5.xx versions.
The consequence is that the component cannot be deployed sucessfully.
Kind regards,
Daniel
[ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 7584050:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5107] Exception during initial start of application de.dkoller/instantdlv~ear in container webservices_container.
        at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:195)
        at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:143)
        at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:419)
        at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
        at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
        at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
        at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:419)
        at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:444)
        at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:334)
        at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
        at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:248)
        at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:389)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3387)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3373)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3276)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3249)
        at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
        at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
        at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
        at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
        at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
        at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
        at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
        at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
        at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
        at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
        at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
        at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
        at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
        at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
        at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
        at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
        at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
        at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
        at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
        at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
        at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Caused by: java.lang.UnsupportedClassVersionError: Bad version number in .class file
        at java.lang.ClassLoader.defineClass1(Native Method)
        at java.lang.ClassLoader.defineClass(ClassLoader.java:654)
        at com.sap.engine.boot.loader.ResourceMultiParentClassLoader.loadClassLocal(ResourceMultiParentClassLoader.java:198)
        at com.sap.engine.boot.loader.MultiParentClassLoader.findClassInLoaderGraph(MultiParentClassLoader.java:302)
        at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:256)
        at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:228)
        at com.sap.engine.services.webservices.server.deploy.ws.WSInitialStartProcess.generateJAXWSFramework(WSInitialStartProcess.java:265)
        at com.sap.engine.services.webservices.server.deploy.ws.WSInitialStartProcess.generateJAXWSFramework(WSInitialStartProcess.java:220)
        at com.sap.engine.services.webservices.server.deploy.ws.WSInitialStartProcess.execute(WSInitialStartProcess.java:140)
        at com.sap.engine.services.webservices.server.deploy.WSBaseAbstractDProcess.makeProcess(WSBaseAbstractDProcess.java:316)
        at com.sap.engine.services.webservices.server.deploy.WebServicesDeployManager.makeStartInitially(WebServicesDeployManager.java:687)
        at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:182)
        ... 36 more

This forum is for the Sun Java System Web Server, not the Sun Java System Application Server. You will likely have better success by posting your question to the Application Server forum(s) at:
http://forum.java.sun.com/category.jspa?categoryID=109

TS4026 error code smtp;550 5.7.1

Similar Messages

Maybe you are looking for