TS4036 How do I override the request for a pin #. I forgot what I put in.

I have an apple i pad that I am locked out of help

You will have to connect your iPad to your computer via USB and in iTunes follow the directions in this link:
http://support.apple.com/kb/ht1212

Similar Messages

How can I bypass the requests for my password?

I'm on a Mac Pro 8 Core, running System 10.7.5. My dealer originally set it up (years ago) so that I simply had to hit the "return" key every time I was asked for a password and this worked fine. Then, when my Mac Mail went wrong and I went through Tech Support, they made me create a password for the Mail account.
I'm now afraid that, if I do anything to the password situation, it will mess up my Mail account once mkore.
Any advice?
Many thanks,
Harry

Hi Kappy,
Thank you very much for your reply.
I have indeed written down my Apple ID and, thanks to you, now understand that this is a completely separate item to my computer password, which I guess is really knows as an admin account password as you point out.
However, my question remains: how can I remove the need to enter my password when I start up my computer, or, alternatively, change it to (say) hitting the "return" key.
When I first bought this computer, my dealer set it up so that the password was the key "return" and also I did not have to "log in" when the computer started up.
Could you possibly find a moment to answer those questions? I'd be most grateful.
Best,
and thanks for your first response. Greatly appreciated.

Lost Ipad today and erased on find my Iphone then later i found it before it was able to erase via wifi how can I reverse the request for erasing to keep all my current content the same

Today I lost my IPad and was FREAKING OUT !!!!! When a couple of store attendants told me to use the ICLOUD find my Iphone option in order to erase all the content just in case it fell into wrong hands. Within an hour via survelance video we located the ipad prior to being able to connect to internet and erase everything.
Now I am keeping the power off keeping it untouched or unerased, QUESTION TO COMMUNITY???? Is there a way for me to successfully avoid the erase process that is due to occurr once I power up and hit the WIFI???? Appreciate any input up front, BRfromGR

You cannot prevent it from being erased now. But surely you backup with iCloud or iTunes and/or sync with iTunes so when you get the iPad up and running again, just restore from your iCloud backup, or your iTunes backup and then sync with iTunes again and you will be OK.
If you don't backup or sync .... Well then you should probably think about doing so in the future. Out of the mouth of a Apple ......
If you erase then find your iOS device, you can restore the information on the device using iCloud Backup (if backup was turned on before you erased it) or iTunes. For more information, see iCloud storage and backup overview, or your device’s user guide in Safari bookmarks or on the Apple Support website.

How do i install the driver for a hp f4440 printer

how do i install the drivier for a hp f4440 printer

Hi,
What Mac OS X version are you using?

How can i change the paasword for my backup?

how can i change the password for my backup?

Actually what I'm looking for to backup my data but unfrotunetely I can't because always asked me for the correct pasword to allowed to restore my data. thx Libby 101a

How do i change the password for my secured internet

I have a westell 327w, verizon walked me through the steps to set up my secured internet now you must have my password to connect to it, I know someone has my password and is connecting to my internet how do i change the password for this?

Not certain what you mean by "my secured internet". If you're referring to your Verizon provided PPP internet connection then you need to work with Verizon on that. You login to the MODEM using the admin account and they will give you a new password to enter. Or, you can tell them the password you want to use first. At least that's how it was with my Westell MODEM and DSL setup.

How to unlock the request for a report and add the same query to new reques

hi,
how to unlock the request for a and add the same query to new reques

You can unlock in SE03 tcode.
Goto tcode SE01, give the transport number --> display --> double click on the transport --> in the next screen select all the elements --> delete --> save.
To attach it to another transport, In RSA1, click on transport connection> Choose Object types> query elements --> here you can find your query/ or you can search, which you can drag to right and attach to the transport (using truck button).

How to create the request for change of selection text into other language.

Hi,
In my object requirement is that when login through Japanese language, then on selection screen selection text should appear in Japanese language. For that I have maintained the text in Japanese language the program where we define the selection text there from translation I have maintained the text in Japanese but while maintain the text it didn't ask me for REQUEST, because of that I am not able to transport the changes to next system, so I want know how to create the request for this case.
Thanks

Hello Chetan,
You could goto the selection screen texts by goto-> selection texts,
Then you could again goto -> Translation
or
Other-> Translation(Not sure )
Then double click on the Program you should be able to see the Texts that need translation, now change something save and come back and try to activate, now it should propose for a new Transport Request.
Either create a new transaport request or give one that you have given for the program.
Hope the issue is resolved.

I have a Macbook Air with Lion and have downloaded drivers for the Pico Pix 2055 which i am unable to run how do I override the security. I have followed the Mac procedure but to no avail :-(

I have a Macbook Air with Lion and have downloaded for the Pico Pix 2055 which I am unable to run. How do I override the security. I have followed the Mac procedure but to no avail :-(.

See the heading "How to open an app from a unidentified developer" on this support page. The instructions apply to installer packages as well as applications.

ICal error "400" the request for account fail!!

iCal on my Macbook keeps on popping up with the following:
The server responded with an error.
The request for account “myemail (at) yahoo.com” failed.
The server responded with
“400”
to operation CalDAVCalendarSplitDualTypeCalendarQueueableOperation.
I don't even have a calendar account with my yahoo account, since I use my gmail and iCloud calendar. I went into system preferences and made certain the "calendars" option was unchecked for my yahoo account in the Internet Accounts page. Nonetheless, iCal pops up with the same error message multiple times within the hour. I'm not sure why iCal is even requesting for my yahoo calendar, since I have never used it in iCal since day one. Any ideas?

Just out of curiosity, did you install FileZilla recently? The install comes with malware called Speedial. You may have noticed that your default search engine in all browsers is set to Yahoo, and furthermore impossible to override via the normal course of action.
Removing Yahoo from local apps is easier than resetting them. All I had to do was delete the (added without my consent) Yahoo account from System Preferences, and the iCal Yahoo calendar disappeared momentarily.
For resetting Safari, look here: Reset Safari Settings/Preferences

The server responded with an error. The request for account "Yahoo" failed. The server responded with "502" to operation CalDAVAccountRefreshQueueableOperation

The server responded with an error. The request for account "Yahoo" failed. The server responded with "502" to operation CalDAVAccountRefreshQueueableOperation

I am tired of how Yahoo has gotten worse and worse. It is the ONLY account I get problems with DAILY (even after removing and re-adding). AOL will act up once in a while not taking a saved password but accepting it when OK is clicked.... But Yahoo is always responding with such errors.... Today's calendar error is:
The request (CalDAVAccountRefreshQueueableOperation) for account “Yahoo” failed.

NPS: Event 6274 - Network Policy Server discarded the request for a user

Intermittently I will get desktop (wired) and laptop (wireless) computers experiencing issues with NPS (they drop off the network).
Some computers are affected more than others, although they are identical hardware and based on a standard image.
In the event log of the NPS servers I can see the following messages:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2/05/2014 8:47:58 a.m.
Event ID:      6274
Task Category: Network Policy Server
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      NT147.domain.local
Description:
Network Policy Server discarded the request for a user.Contact the Network Policy Server administrator for more information.User:
Security ID:   NULL SID
Account Name:   host/DPC0387.domain.local
Account Domain:   DOMAIN
Fully Qualified Account Name: DOMAIN\DPC0387$Client Machine:
Security ID:   NULL SID
Account Name:   -
Fully Qualified Account Name: -
OS-Version:   -
Called Station Identifier:  3c-xx-xx-xx-xx-xx
Calling Station Identifier:  00-xx-xx-xx-xx-xxNAS:
NAS IPv4 Address:  10.nnn.nnn.nnn
NAS IPv6 Address:  -
NAS Identifier:   ND246
NAS Port-Type:   Ethernet
NAS Port:   71RADIUS Client:
Client Friendly Name:  Network Device Management Subnet
Client IP Address:   10.nnn.nnn.nnnAuthentication Details:
Connection Request Policy Name: NAP 802.1X (Wired)
Network Policy Name:  -
Authentication Provider:  Windows
Authentication Server:  NT147.domain.local
Authentication Type:  -
EAP Type:   -
Account Session Identifier:  384F322E317838316564303034313030306230666632
Reason Code:   1
Reason:    An internal error occurred. Check the system event log for additional information.
How do I debug when an internal error occurs but there is nothing in the system event log? Where else can I look?
Here's the packet trace that matches the event log entry above:
No.     Time        Source                Destination           Protocol Length Time from request Info
      1 0.000000    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Identity
      2 2.470423    Universa_xx:xx:xx     Nearest               EAPOL    60                       Start
      3 2.472870    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Identity
      4 2.539416    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Identity
      5 2.544206    Universa_xx:xx:xx     Nearest               EAPOL    60                       Start
      6 2.548804    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Identity
      7 2.550050    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Identity
      8 2.552597    10.switch             10.NPS_Server         RADIUS   254                      Access-Request(1) (id=249, l=208)
      9 2.556043    10.NPS_Server         10.switch             RADIUS   136    0.003446000       Access-Challenge(11) (id=249, l=90)
     10 2.565876    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Protected EAP (EAP-PEAP)
     11 2.569472    10.switch             10.NPS_Server         RADIUS   254                      Access-Request(1) (id=250, l=208)
     12 2.572566    10.NPS_Server         10.switch             RADIUS   136    0.003094000       Access-Challenge(11) (id=250, l=90)
     13 2.580254    Universa_xx:xx:xx     Nearest               TLSv1    123                      Client Hello
     14 2.586544    10.switch             10.NPS_Server         RADIUS   361                      Access-Request(1) (id=251, l=315)
     15 4.564841    Universa_xx:xx:xx     Nearest               EAPOL    60                       Start
     16 4.568530    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Identity
     17 4.569876    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Identity
     18 4.582263    10.switch             10.NPS_Server         RADIUS   254                      Access-Request(1) (id=252, l=208)
     19 4.586006    10.NPS_Server         10.switch             RADIUS   136    0.003743000       Access-Challenge(11) (id=252, l=90)
     20 4.591896    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Request, Protected EAP (EAP-PEAP)
     21 4.592692    Universa_xx:xx:xx     Nearest               TLSv1    123                      Client Hello
     22 4.599634    10.switch             10.NPS_Server         RADIUS   361                      Access-Request(1) (id=253, l=315)
     23 4.600887    10.NPS_Server         10.switch             IPv4     1518                     Fragmented IP protocol (proto=UDP 17, off=0, ID=07db)
     24 4.609920    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    1514                     Server Hello, Certificate, Certificate Request, Server Hello Done
     25 4.610516    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Protected EAP (EAP-PEAP)
     26 4.617407    10.switch             10.NPS_Server         RADIUS   262                      Access-Request(1) (id=254, l=216)
     27 4.618352    10.NPS_Server         10.switch             RADIUS   288    0.000945000       Access-Challenge(11) (id=254, l=242)
     28 4.623650    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    176                      Server Hello, Certificate, Certificate Request, Server Hello Done
     29 4.643316    Universa_xx:xx:xx     Nearest               TLSv1    361                      Certificate, Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
     30 4.649607    10.switch             10.NPS_Server         RADIUS   601                      Access-Request(1) (id=255, l=555)
     31 4.656950    10.NPS_Server         10.switch             RADIUS   199    0.007343000       Access-Challenge(11) (id=255, l=153)
     32 4.662734    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    87                       Change Cipher Spec, Encrypted Handshake Message
     33 4.681106    Universa_xx:xx:xx     Nearest               EAP      60                       Response, Protected EAP (EAP-PEAP)
     34 4.788536    10.switch             10.NPS_Server         RADIUS   262                      Access-Request(1) (id=2, l=216)
     35 4.789735    10.NPS_Server         10.switch             RADIUS   173    0.001199000       Access-Challenge(11) (id=2, l=127)
     36 4.795723    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    61                       Application Data
     37 4.796372    Universa_xx:xx:xx     Nearest               TLSv1    93                       Application Data
     38 4.802368    10.switch             10.NPS_Server         RADIUS   331                      Access-Request(1) (id=3, l=285)
     39 4.803363    10.NPS_Server         10.switch             RADIUS   189    0.000995000       Access-Challenge(11) (id=3, l=143)
     40 4.808905    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    77                       Application Data
     41 4.809501    Universa_xx:xx:xx     Nearest               TLSv1    77                       Application Data
     42 4.817342    10.switch             10.NPS_Server         RADIUS   315                      Access-Request(1) (id=4, l=269)
     43 4.822986    10.NPS_Server         10.switch             RADIUS   189    0.005644000       Access-Challenge(11) (id=4, l=143)
     44 4.828973    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    77                       Application Data
     45 4.833318    Universa_xx:xx:xx     Nearest               TLSv1    829                      Application Data
     46 4.840610    10.switch             10.NPS_Server         RADIUS   1073                     Access-Request(1) (id=5, l=1027)
     47 4.845946    10.NPS_Server         10.switch             RADIUS   189    0.005336000       Access-Challenge(11) (id=5, l=143)
     48 4.850938    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    77                       Application Data
     49 4.907924    Universa_xx:xx:xx     Nearest               TLSv1    141                      Application Data
     50 4.913390    10.switch             10.NPS_Server         RADIUS   379                      Access-Request(1) (id=6, l=333)
     51 4.917535    10.NPS_Server         10.switch             RADIUS   221    0.004145000       Access-Challenge(11) (id=6, l=175)
     52 4.922877    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    109                      Application Data
     53 4.923472    Universa_xx:xx:xx     Nearest               TLSv1    61                       Application Data
     54 4.930319    10.switch             10.NPS_Server         RADIUS   299                      Access-Request(1) (id=7, l=253)
     55 4.937348    10.NPS_Server         10.switch             RADIUS   381    0.007029000       Access-Challenge(11) (id=7, l=335)
     56 4.942543    JuniperN_xx:xx:xx     Universa_xx:xx:xx     TLSv1    269                      Application Data
     57 4.944791    Universa_xx:xx:xx     Nearest               TLSv1    125                      Application Data
     58 4.951408    10.switch             10.NPS_Server         RADIUS   363                      Access-Request(1) (id=8, l=317)
     59 4.954022    10.NPS_Server         10.switch             RADIUS   355    0.002614000       Access-Accept(2) (id=8, l=309)
     60 4.981482    JuniperN_xx:xx:xx     Universa_xx:xx:xx     EAP      60                       Success
     61 32.590347   10.switch             10.NPS_Server         RADIUS   361                      Access-Request(1) (id=251, l=315)
     62 62.592420   10.switch             10.NPS_Server         RADIUS   361                      Access-Request(1) (id=251, l=315)
     63 92.595043   10.switch             10.NPS_Backup_Server RADIUS   361                      Access-Request(1) (id=9, l=315)
     64 122.597856 10.switch             10.NPS_Backup_Server RADIUS   361                      Access-Request(1) (id=9, l=315)
     65 152.600618 10.switch             10.NPS_Backup_Server RADIUS   361                      Access-Request(1) (id=9, l=315)

A belated thanks for your reply.
Our environment doesn't have NPS accounting configured so that was easy to rule out.
The mid-day drop outs have stopped after I added "set protocols dot1x authenticator no-mac-table-binding" to our Juniper switches (which prevents mac address aging from clearing the active dot1x client session).
I believe the above error message occurs because the RADIUS session ID is rejected / ignored because of some quirks in the RADIUS standard. At the start of a dot1x authentication request a RADIUS session ID is created. For whatever reason the
RADIUS/NAP server stops responding and the Juniper switch fails over to the backup RADIUS/NAP server configured. The session ID is kept (per RADIUS standard) but the backup RADIUS/NAP server doesn't know about the session, so this event: "Network
Policy Server discarded the request for a user." occurs.
It would be nice to see a clearer error message "Invalid RADIUS session" or similar.
There is a Microsoft guide on how to set up RADIUS/NAP servers in a highly available configuration - something to do with RADIUS proxy servers.
It would be even nicer to see some kind of RADIUS session synchronisation between NAP servers... if it doesn't already exist?
I am having the same exact issue you posted on here except I have Extreme Network switches. Some of my computers, various hardware, will randomly not authenticate during re-authentication. The switch says that it failed to contact the NPS server so then it
switches to my backup server. The client has a random time on how long it waits to authenticate so sometimes I end up having the disable/re-enable the port they are connected to so that the session is started again. I see that you basically removed the option
to force clients to re-authenticate Any downfall disabling that?. Any idea why the NPS server is no longer responding? Are you using Windows Server 2012?

The request for account "iCloud" failed. The server responded with "400" to operation CalDAVAddSubscriptionCalendarQueueableOperation

Does anyone know how to fix this problem? Or even what the problem is? I am trying to subscribe to a calendar and every time I do, it gives me this response:
The request for account “iCloud” failed.
The server responded with
“400”
to operation CalDAVAddSubscriptionCalendarQueueableOperation
Any help would be fantastic. This is a course calendar, and I really need it.
Thank you!

Keep away from iCloud and keep away from iCal. This is the most reliable solution to these 403 issues.
The Mac cannot upload calendars and keeps popping up error messages with an insane frequency.

How can I decouple the pagination for a global region?

I was having a delightful time using a common region defined on a global page when I determined that pagination setting was begin carried from one page to the next. Arghhhh! So for example, if I have paged to the second set (page) of rows (11-20) on Page 1 and then I go to Page 2, the second set (page) of rows (11-20) is displayed there. If I go to a page which only has a first set of rows (1-10), I get the pagination error "Invalid set of rows requested, the source data of the report has been modified. Reset Pagination". And when I click to reset, it just repeats the error. [I suppose it tries to display the second set or rows (11-20) again -- which doesn't exist. What's that saying about insanity?]
How can I decouple the pagination for a global region? I want it to operarate just as it would if it were not sharing a common region. So if I'm looking at rows (11-20) on page 1, I can go to any other page beginning with rows 1-10 there. Then return to page 1 where I left off with rows 11-20 displayed. One solution is NOT to paginate but that's not my preferred solution.
Howard

Howard(...inTraining) wrote:
I was having a delightful time using a common region defined on a global page when I determined that pagination setting was begin carried from one page to the next. Arghhhh! So for example, if I have paged to the second set (page) of rows (11-20) on Page 1 and then I go to Page 2, the second set (page) of rows (11-20) is displayed there. If I go to a page which only has a first set of rows (1-10), I get the pagination error "Invalid set of rows requested, the source data of the report has been modified. Reset Pagination".
The fact that there are different numbers of rows returned on different pages implies that the reports have some local page dependencies, so why try to use a global component? What's the actual requirement? How many pages does the report have to appear on? (Please say it is a report and not a tabular form...)
How can I decouple the pagination for a global region? I want it to operarate just as it would if it were not sharing a common region.
The point is that a global region is just that: a single region that happens to be displayed on multiple pages. It does not create multiple instances of a region on different pages. (Specifically, a region has a single region ID, and this is used to reference it whether it appears on one page or all of them. The region ID is used by the report for the purposes of AJAX refresh, pagination etc.)
A similar situation was discussed a long time ago. I'm rather surprised that Scott regarded it as a bug: the fact that it doesn't seem to have been "fixed" or have a bug number attached may indicate that the others on the APEX team disagreed with him? I haven't tried the workaround he suggested, however I don't think it's likely to be prove a useful line of attack for your issue, as (1) it resets pagination rather than preserving it; and (2) it doesn't appear to be compatible with the AJAX PPR pagination used in more recent versions of APEX.
I can't see any straightforward "solution" (largely because I don't think there's really a problem: the exhibited behaviour is exactly how I expect/want global regions to behave). Pagination processing is undocumented. The current 4.2 apex.widget.report.paginate JS method is specifically annotated as "for internal use only". Search the forum for custom pagination techniques. Messy looking hacks for IRs have previously been suggested.
So if I'm looking at rows (11-20) on page 1, I can go to any other page beginning with rows 1-10 there. Then return to page 1 where I left off with rows 11-20 displayed. One solution is NOT to paginate but that's not my preferred solution.
Assuming that there aren't too many pages involved, the other obvious option is to create unique regions on the required pages. You can achieve some level of reusability by creating SQL Query (PL/SQL function body returning SQL query) reports based on an external function so that there's only a single SQL source to be maintained.
Explain the requirement in more detail. Pagination is not the only option for reducing the quantity of displayed information. Often it's better to display some of all of the data, rather than all of some of it...

The request for account "iCloud" failed.

I keep getting this message:
"The request for account “iCloud” failed.
The server responded with
“502”
to operation CalDAVAccountRefreshQueueableOperation."
whenever iCal opens. It gives me the option to "Stay Offline" or "Go Online" but even when I click "Go Online" the message just pops up again.
How can I fix it?!
Thanks in advance.

Try this first:
In iCal Preferences…, choose Accounts, then select the account that is giving you trouble. Uncheck the box labeled Enable this account. Wait a few seconds, then re-check the box. This should solve the problem.

TS4036 How do I override the request for a pin #. I forgot what I put in.

Similar Messages

Maybe you are looking for